Cutting tools: choice of 20,000 articles
Select language

Reducer rings

A circular saw blade or cutter head does not always fit directly onto the spindle of your machine: the tool's bore is then larger than the spindle diameter. Reducer rings, also called reduction rings, bridge this difference and ensure perfectly centred, secure mounting. The range is divided into reducer rings for circular saw blades and reducer rings for cutter heads.

Correct centring is essential. A reducer ring with play can cause imbalance, vibration and a less precise sawing or milling result. Therefore, before ordering, measure both the bore of your tool and the exact spindle diameter of the machine. Then choose the reducer ring that connects both sizes without any gap. This allows you to use the same saw blade on machines with different spindle diameters without any problem.

Popular in Reducer rings

View all products
Reducing ring for saw blade from 20 to bore D=20mm B=16mm

Reducing ring for saw blade from 20 to bore D=20mm B=16mm

  • D=20 x 16 x 1,2mm
€4.00
€4.84 VAT incl.
Code:299.222.00
In stock
Reducing ring for saw blade from arbor hole 30 to D=30mm B=25,4mm · 299.212.00

Reducing ring for saw blade from arbor hole 30 to D=30mm B=25,4mm · 299.212.00

  • D=30 x 25,4 x 2mm
€4.00
€4.84 VAT incl.
Code:299.212.00
In stock
Reducing ring for saw blade from 30 mm bore to 16mm P=1,4mm

Reducing ring for saw blade from 30 mm bore to 16mm P=1,4mm

  • D=30 x 16 x 1,4mm
€4.00
€4.84 VAT incl.
Code:299.223.00
In stock
Reducing ring for saw blade from bore 25,4 to 20mm P=1,4mm

Reducing ring for saw blade from bore 25,4 to 20mm P=1,4mm

  • D=25,4 x 20 x 1,4mm
€4.00
€4.84 VAT incl.
Code:299.214.00
In stock
Reduction ring for saw blade from bore 30 to 20mm P=1,4mm

Reduction ring for saw blade from bore 30 to 20mm P=1,4mm

  • D=30 x 20 x 1,4mm
€4.00
€4.84 VAT incl.
Code:299.224.00
In stock
Reducing ring for saw blade from 30 mm bore to 16mm P=2mm

Reducing ring for saw blade from 30 mm bore to 16mm P=2mm

  • D=30 x 16 x 2mm
€4.00
€4.84 VAT incl.
Code:299.226.00
In stock
Reducing ring for saw blade from arbor hole 22,2 to D=22,2mm B=20mm

Reducing ring for saw blade from arbor hole 22,2 to D=22,2mm B=20mm

  • D=22,2 x 20 x 1,4mm
€4.00
€4.84 VAT incl.
Code:299.238.00
In stock
Reduction ring for saw blade from bore 30 to 20mm P=2mm

Reduction ring for saw blade from bore 30 to 20mm P=2mm

  • D=30 x 20 x 2mm
€4.00
€4.84 VAT incl.
Code:299.227.00
In stock
Reducer ring for saw blade from bore 30 to 25mm P=2mm

Reducer ring for saw blade from bore 30 to 25mm P=2mm

  • D=30 x 25 x 2mm
€4.00
€4.84 VAT incl.
Code:299.228.00
In stock
Reducer ring for saw blade from bore 30 to 25mm P=1,4mm

Reducer ring for saw blade from bore 30 to 25mm P=1,4mm

  • D=30 x 25 x 1,4mm
€4.00
€4.84 VAT incl.
Code:299.225.00
In stock
Transition piece for bore hole D=40mm d=30mm

Transition piece for bore hole D=40mm d=30mm

  • D=40 x 30
€30.10
€36.42 VAT incl.
Code:699.040.30
In stock
Reducing ring for saw blade from 32 to bore D=32mm B=30mm

Reducing ring for saw blade from 32 to bore D=32mm B=30mm

  • D=32 x 30 x 2mm
€4.00
€4.84 VAT incl.
Code:299.229.00
In stock
About this category

Reducing rings for saw blades and cutter heads

A reducing ring bridges the difference between an arbor bore that is too large and a smaller machine arbor. For example, this allows you to mount a saw blade with a 30 mm arbor bore on a 25.4 or 20 mm arbor, or a cutter head with a larger bore on a thinner cutter shaft. The ring must fit exactly and must have no play; otherwise the tool will run off-centre and vibrations will occur.

For circular saw blades or for cutter heads

Reducing rings for circular saw blades are thin, flat rings, usually 1.2 to 2 mm thick; choose a ring that is no thicker than the saw blade. You will find them, among others, from arbor bore 30 to 25.4, 20 or 16 mm and from 25.4 to 20 or 15.87 mm. Reducing rings for cutter heads are transition pieces with a collar, supplied in pairs: on each side of the head, insert one into the arbor bore. The two types are not interchangeable.

What you must never do

Never drill out an arbor bore to make a blade fit: you alter the internal tension of the blade, and at high speeds that is life-threatening. Also never use a ring with play or a ring that fits only halfway into the arbor bore. If the tool does not run perfectly round and vibration-free after mounting, do not use it and have the bore adjusted via our sharpening and adjustment service.

How do I choose the right reducing ring?
You need two measurements: the outer diameter must match the arbor bore of your tool, the inner diameter the diameter of your machine arbor. Measure both, or read them from the tool and the machine documentation.
May I drill out the arbor bore of a saw blade?
No. A circular saw blade is tensioned by design; enlarging the bore disrupts that tension and the blade can break at high speeds. Use a reducing ring, or have the bore enlarged via our sharpening and adjustment service.
How do I mount a reducing ring on a cutter head?
The reducing rings for cutter heads are supplied in pairs: on each side of the head, slide one transition piece into the arbor bore, so that the head remains centred over its full height. Then check whether the head runs without play and vibration-free.
Can I also reduce to a larger arbor?
No, that is physically impossible: a ring can only make an arbor bore smaller. If the arbor bore of your tool is smaller than the machine arbor, the tool will not fit and you must choose a different size.
Compiled by Garnotec’s specialist team — specialist in professional cutting tools for more than 30 years. Unsure which version suits your machine or material? Contact our team · View the full range

We use cookies to ensure the website functions properly. In addition, we place analytical cookies (Google Analytics, Microsoft Clarity) to analyse the use of the website. These are only placed after your consent. More information