Cutting tools: choice of 20,000 articles
Select language

Locking ring

Small parts with a big impact on the quality of milling work: these are the locking rings for ball bearings and depth stops in this category. A bearing locking ring keeps the ball bearing firmly on the milling shaft, so the guide cannot shift during milling. A depth stop, in turn, determines how deep a drill or cutter may enter the workpiece, each time to exactly the same dimension.

Locking rings and depth stops are typical wear and loss items that you should keep in stock. A simple check prevents many problems: inspect at every cutter change whether the locking ring is still firmly in place and free of resin build-up. Even a few tenths of a millimetre of play can already lead to an irregular profile depth at the edge of the workpiece.

Read more about this category
Bearing locking ring D=12,2mm B=6,35mm K=6,5mm

Bearing locking ring D=12,2mm B=6,35mm K=6,5mm

  • B=6,35 K=6,5 D=12,2
€6.80
€8.23 VAT incl.
Code:541.001.00
In stock
Bearing locking ring D=18,6mm B=12,7mm K=6,5mm

Bearing locking ring D=18,6mm B=12,7mm K=6,5mm

  • B=12,7 K=6,5 D=18,6
€6.80
€8.23 VAT incl.
Code:541.002.00
In stock
Bearing locking ring D=12,3mm B=6mm K=6,5mm

Bearing locking ring D=12,3mm B=6mm K=6,5mm

  • B=6 K=6,5 D=12,3
€6.80
€8.23 VAT incl.
Code:541.003.00
In stock
Bearing locking ring D=14mm B=8mm K=6,5mm

Bearing locking ring D=14mm B=8mm K=6,5mm

  • B=8 K=6,5 D=14
€6.80
€8.23 VAT incl.
Code:541.004.00
In stock
Bearing locking ring D=18,7mm B=12mm K=5mm

Bearing locking ring D=18,7mm B=12mm K=5mm

  • B=12 K=5 D=18,7
€6.80
€8.23 VAT incl.
Code:541.005.00
In stock
Bearing locking ring D=15,5mm B=9,5mm K=5mm

Bearing locking ring D=15,5mm B=9,5mm K=5mm

  • B=9,5 K=5 D=15,5
€6.80
€8.23 VAT incl.
Code:541.006.00
In stock
Bearing locking ring D=6,15mm B=3,175mm K=5mm · 541.009.00

Bearing locking ring D=6,15mm B=3,175mm K=5mm · 541.009.00

  • B=3,175 K=5 D=6,15
€6.30
€7.62 VAT incl.
Code:541.009.00
In stock
Depth stop D=14,3mm B=5mm K=10mm

Depth stop D=14,3mm B=5mm K=10mm

  • B=5 K=10 D=14,3
€5.80
€7.02 VAT incl.
Code:541.050.00
In stock
Depth stop D=14,3mm B=6mm K=10mm

Depth stop D=14,3mm B=6mm K=10mm

  • B=6 K=10 D=14,3
€5.80
€7.02 VAT incl.
Code:541.060.00
In stock
Depth stop D=17,8mm B=8mm K=10mm

Depth stop D=17,8mm B=8mm K=10mm

  • B=8 K=10 D=17,8
€5.80
€7.02 VAT incl.
Code:541.080.00
In stock
Depth stop D=19,1mm B=9,5mm K=9,5mm

Depth stop D=19,1mm B=9,5mm K=9,5mm

  • B=9,5 K=9,5 D=19,1
€6.00
€7.26 VAT incl.
Code:541.095.00
In stock
Depth stop D=19,8mm B=10mm K=12mm

Depth stop D=19,8mm B=10mm K=12mm

  • B=10 K=12 D=19,8
€5.80
€7.02 VAT incl.
Code:541.100.00
In stock
Multi-turn depth adjustment ring in Delrin® B=10mm K=19mm

Multi-turn depth adjustment ring in Delrin® B=10mm K=19mm

  • B=10 K=19 D=26
€15.20
€18.39 VAT incl.
Code:541.101.00
In stock
Depth stop D=19,8mm B=12mm K=12mm

Depth stop D=19,8mm B=12mm K=12mm

  • B=12 K=12 D=19,8
€5.80
€7.02 VAT incl.
Code:541.120.00
In stock
Multi-turn depth adjustment ring in Delrin® B=12mm K=19mm

Multi-turn depth adjustment ring in Delrin® B=12mm K=19mm

  • B=12 K=19 D=26
€15.20
€18.39 VAT incl.
Code:541.121.00
In stock
Multi-turn depth adjustment ring in Delrin® B=14mm K=18mm

Multi-turn depth adjustment ring in Delrin® B=14mm K=18mm

  • B=14 K=18 D=26
€15.20
€18.39 VAT incl.
Code:541.141.00
In stock
About this category

Depth stops for drills and locking rings for ball bearings

Two small rings, two tasks. A depth stop fits onto the drill bit so you can drill every hole to the same depth. A locking ring holds the ball bearing of a cutter in place on the shaft. You will find them at CMT for drill and shaft diameters from 3.175 to 14 mm, metric and in imperial sizes, and in addition a depth adjustment ring with a freely rotating ring in Delrin®, which protects the surface of your workpiece.

Depth stop: drill to the same depth, hole after hole

A depth stop, also called a drill stop, is slid over the drill bit to the desired depth and tightened with the clamping screw. Choose a ring with an inner bore that matches the drill diameter: a ring that is too large sits crooked and results in uneven depth. After tightening, remeasure the distance between the ring and the drill tip and drill a test hole in scrap wood. For lacquered or veneered surfaces, choose the version with a Delrin® ring, which stops as soon as it touches the workpiece.

Locking ring for the ball bearing of your cutter

With cutters fitted with a replaceable ball bearing, a locking ring secures the bearing on the shaft. If this ring comes loose, the bearing shifts and the cutting depth along the edge of the workpiece changes. Choose the ring according to the shaft diameter of your cutter, mount it flush against the bearing and check with every cutter change that it is still firmly tight and free of resin build-up. Loose ball bearings and the corresponding bolts can be found in the parts section.

How do I set a depth stop on my drill bit?
Slide the ring over the drill bit until the distance between ring and drill tip equals the desired drilling depth, and tighten the clamping screw. Drill a test hole in scrap wood and measure again: adjusting by a tenth of a millimeter is faster than correcting a hole that is too deep.
What is the difference between a depth stop and an adjustment ring?
You clamp a depth stop onto a drill bit to limit the drilling depth. You slide an adjustment ring onto a router shaft or saw shaft to determine the tool height; you will find these in the adjustment rings category. The two are therefore not interchangeable.
Why a depth stop with Delrin® ring?
A standard steel ring turns along with the drill bit and can leave a circular mark on the surface on contact. With the version featuring a freely rotating ring in Delrin®, that ring stops as soon as it touches the workpiece. This protects lacquered, veneered or other sensitive surfaces.
What size locking ring or depth stop do I need?
The bore of the ring must match the diameter of the shaft or drill bit on which it is fitted. In this category, the sizes range from 3.175 to 14 mm, also in imperial sizes such as 6.35 and 12.7 mm. If in doubt, measure the shaft with calipers.
Compiled by Garnotec’s specialist team — specialist in professional cutting tools for more than 30 years. Unsure which version suits your machine or material? Contact our team · View the full range

We use cookies to ensure the website functions properly. In addition, we place analytical cookies (Google Analytics, Microsoft Clarity) to analyse the use of the website. These are only placed after your consent. More information