Reducer rings
A circular saw blade or cutter head does not always fit directly onto the spindle of your machine: the tool's bore is then larger than the spindle diameter. Reducer rings, also called reduction rings, bridge this difference and ensure perfectly centred, secure mounting. The range is divided into reducer rings for circular saw blades and reducer rings for cutter heads.
Correct centring is essential. A reducer ring with play can cause imbalance, vibration and a less precise sawing or milling result. Therefore, before ordering, measure both the bore of your tool and the exact spindle diameter of the machine. Then choose the reducer ring that connects both sizes without any gap. This allows you to use the same saw blade on machines with different spindle diameters without any problem.
Which type of article are you looking for?
RequiredThis way, we immediately show only the articles, questions and filters that belong to that group.
Filters
Availability
B (bore) in mm
D (diameter) in mm
K (thickness)
d (small diameter) in mm
Packaging unit

Reducing ring for saw blade from 30 bore to D=30mm B=15,87mm · 299.211.00
- D=30 x 15,87 x 1,4mm

Reducing ring for saw blade from arbor hole 30 to D=30mm B=25,4mm · 299.212.00
- D=30 x 25,4 x 2mm

Reducer ring for saw blade from 25,4 bore to D=25,4mm B=19,05mm
- D=25,4 x 19,05 x 1,4mm

Reducing ring for saw blade from bore 25,4 to 20mm P=1,4mm
- D=25,4 x 20 x 1,4mm

Reducing ring for saw blade from bore 25.4 to D=25,4mm B=22mm
- D=25.4 x 22 x 1.4mm

Reducing ring for saw blade from bore 25,4 to D=25,4mm B=15,87mm
- D=25,4 x 15,87 x 1,4mm

Reducing ring for saw blade from bore 15,87 to D=15,87mm B=12,7mm
- D=15,87 x 12,7 x 1,2mm

Reducing ring for saw blade from bore 15,87 to D=15,87mm B=10mm
- D=15,87 x 10 x 1,2mm

Reducing ring for saw blade from bore 25,4 to 22,2mm P=2,3mm
- D=25,4 x 22,2 x 2,3mm

Reducing ring for saw blade from bore 25,4 to 20mm P=2,3mm
- D=25,4 x 20 x 2,3mm

Reducing ring for saw blade from bore 20 to D=20mm B=12,7mm · 299.221.00
- D=20 x 12,7 x 1,2mm

Reducing ring for saw blade from 20 to bore D=20mm B=16mm
- D=20 x 16 x 1,2mm

Reducing ring for saw blade from 30 mm bore to 16mm P=1,4mm
- D=30 x 16 x 1,4mm

Reduction ring for saw blade from bore 30 to 20mm P=1,4mm
- D=30 x 20 x 1,4mm

Reducer ring for saw blade from bore 30 to 25mm P=1,4mm
- D=30 x 25 x 1,4mm

Reducing ring for saw blade from 30 mm bore to 16mm P=2mm
- D=30 x 16 x 2mm

Reduction ring for saw blade from bore 30 to 20mm P=2mm
- D=30 x 20 x 2mm

Reducer ring for saw blade from bore 30 to 25mm P=2mm
- D=30 x 25 x 2mm

Reducing ring for saw blade from 32 to bore D=32mm B=30mm
- D=32 x 30 x 2mm

Reducing ring for saw blade from bore 35 to D=35mm B=30mm
- D=35 x 30 x 2mm

Reduction ring for saw blade from 30 to bore D=30mm B=22mm
- D=30 x 22 x 1,4mm

Reducing ring for saw blade from bore to D=30mm B=18mm
- D=30 x 18 x 1,4mm

Reducer ring for saw blade from 35 to bore D=35mm B=32mm
- D=35 x 32 x 2mm

Reduction ring for saw blade from arbor hole 20 to D=20mm B=18mm
- D=20 x 18 x 1,4mm
24 of 71 products shown
Reducing rings for saw blades and cutter heads
A reducing ring bridges the difference between an arbor bore that is too large and a smaller machine arbor. For example, this allows you to mount a saw blade with a 30 mm arbor bore on a 25.4 or 20 mm arbor, or a cutter head with a larger bore on a thinner cutter shaft. The ring must fit exactly and must have no play; otherwise the tool will run off-centre and vibrations will occur.
For circular saw blades or for cutter heads
Reducing rings for circular saw blades are thin, flat rings, usually 1.2 to 2 mm thick; choose a ring that is no thicker than the saw blade. You will find them, among others, from arbor bore 30 to 25.4, 20 or 16 mm and from 25.4 to 20 or 15.87 mm. Reducing rings for cutter heads are transition pieces with a collar, supplied in pairs: on each side of the head, insert one into the arbor bore. The two types are not interchangeable.
What you must never do
Never drill out an arbor bore to make a blade fit: you alter the internal tension of the blade, and at high speeds that is life-threatening. Also never use a ring with play or a ring that fits only halfway into the arbor bore. If the tool does not run perfectly round and vibration-free after mounting, do not use it and have the bore adjusted via our sharpening and adjustment service.
How do I choose the right reducing ring?
May I drill out the arbor bore of a saw blade?
How do I mount a reducing ring on a cutter head?
Can I also reduce to a larger arbor?
Related categories
- Locking ring
- Cutters
- Saws
- Ball bearings
- Bushing enlargers
- Drills
- Knives
- Set rings
- CNC accessories
- Machines & accessories
- Pressure pads
- Adapters
- Fan Items
- Drill holders for dowel drills
- Collet Chucks
- Bolts
- Sharpening and Adjustment Service
- Nuts
- Keys
- Dovetail joint parts
- Parts for mortising machines
- Machine parts
- Other parts