Cutting tools: choice of 20,000 articles
Select language

Drill holders for dowel drills

In a dowel drilling machine or drilling unit, a dowel drill is not mounted directly in the spindle: the connection is made via a drill holder for dowel drills. This category includes drill holders in left- and right-hand versions, available as a flat base version, with a centering seat of 11 × 4 mm or with a centering cone in various angles, including 20°48' and 30°.

The direction of rotation is the most important selection criterion. Drilling groups drive their spindles alternately counterclockwise and clockwise, which means both versions are needed as a pair. Then choose the correct mount for your dowel drills — a seat or cone — and check this combination carefully. A drill that does not fit fully into the correct seat will run out of true. In dowel joints, even a small deviation immediately leads to joints that do not fit properly.

Drill holder, right hand D=19,5mm S=M8 B=10mm

Drill holder, right hand D=19,5mm S=M8 B=10mm

  • RH (right-hand rotation)
€12.70
€15.37 VAT incl.
Code:301.000.01
In stock
Drill holder, left D=19,5mm S=M8 B=10mm

Drill holder, left D=19,5mm S=M8 B=10mm

  • LH (left-hand)
€12.70
€15.37 VAT incl.
Code:301.000.02
In stock
Drill holder, right hand D=16mm S=M8 B=8mm

Drill holder, right hand D=16mm S=M8 B=8mm

  • RH (right-hand rotation)
€14.30
€17.30 VAT incl.
Code:301.080.01
In stock
Drill holder, left D=16mm S=M8 B=8mm

Drill holder, left D=16mm S=M8 B=8mm

  • LH (left-hand)
€14.30
€17.30 VAT incl.
Code:301.080.02
In stock
Drill holder, right hand D=19,5mm S=M10 B=10mm · 302.000.01

Drill holder, right hand D=19,5mm S=M10 B=10mm · 302.000.01

  • D=19,5mm M10
  • RH (right-hand)
€12.70
€15.37 VAT incl.
Code:302.000.01
In stock
Drill holder, left D=19,5mm S=M10 B=10mm · 302.000.02

Drill holder, left D=19,5mm S=M10 B=10mm · 302.000.02

  • D=19,5mm M10
  • LH (left-hand rotation)
€12.70
€15.37 VAT incl.
Code:302.000.02
In stock
Drill holder, right hand D=16mm S=M10 B=8mm

Drill holder, right hand D=16mm S=M10 B=8mm

  • D=16mm M10
  • RH (right-hand rotating)
€14.30
€17.30 VAT incl.
Code:302.080.01
In stock
Drill holder, left D=16mm S=M10 B=8mm

Drill holder, left D=16mm S=M10 B=8mm

  • D=16mm M10
  • LH (left-hand rotation)
€14.30
€17.30 VAT incl.
Code:302.080.02
In stock
Drill holder with centering cone 30°, right D=19,5mm B=10mm

Drill holder with centering cone 30°, right D=19,5mm B=10mm

  • D=19,5mm M10
  • RH (right-hand)
€13.30
€16.09 VAT incl.
Code:303.000.01
In stock
Drill holder with centering cone 30°, left-hand D=19,5mm B=10mm

Drill holder with centering cone 30°, left-hand D=19,5mm B=10mm

  • D=19,5mm M10
  • LH (left-hand rotation)
€13.30
€16.09 VAT incl.
Code:303.000.02
In stock
Drill holder with centering cone 30°, right D=16mm B=8mm

Drill holder with centering cone 30°, right D=16mm B=8mm

  • D=16mm M10
  • RH (right-hand rotating)
€15.50
€18.76 VAT incl.
Code:303.080.01
In stock
Drill holder with centering cone 30°, left-hand D=16mm B=8mm

Drill holder with centering cone 30°, left-hand D=16mm B=8mm

  • D=16mm M10
  • LH (left-hand rotation)
€15.50
€18.76 VAT incl.
Code:303.080.02
In stock
Boring head with centering cone 20° 48', right-hand D=19,5mm B=10mm

Boring head with centering cone 20° 48', right-hand D=19,5mm B=10mm

  • D=19,5mm S=M8
  • RH (right-hand rotation)
€16.00
€19.36 VAT incl.
Code:304.000.01
In stock
Drill holder with centering cone 20° 48', left D=19,5mm B=10mm

Drill holder with centering cone 20° 48', left D=19,5mm B=10mm

  • D=19,5mm S=M8
  • LH (left-hand)
€16.00
€19.36 VAT incl.
Code:304.000.02
In stock
Drill holder with centering pin 11x4 mm, right · 305.000.01

Drill holder with centering pin 11x4 mm, right · 305.000.01

  • D=19,5mm M10
  • RH (right-hand)
€12.50
€15.13 VAT incl.
Code:305.000.01
In stock
Drill holder with centering 11x4 mm, left · 305.000.02

Drill holder with centering 11x4 mm, left · 305.000.02

  • D=19,5mm M10
  • LH (left-hand rotation)
€12.50
€15.13 VAT incl.
Code:305.000.02
In stock
Drill holder with centering pin 11x4 mm, right · 305.080.01

Drill holder with centering pin 11x4 mm, right · 305.080.01

  • D=16mm M10
  • RH (right-hand rotating)
€14.10
€17.06 VAT incl.
Code:305.080.01
In stock
Drill holder with centering 11x4 mm, left · 305.080.02

Drill holder with centering 11x4 mm, left · 305.080.02

  • D=16mm M10
  • LH (left-hand rotation)
€14.10
€17.06 VAT incl.
Code:305.080.02
In stock
Bore holder with center point 9x4 mm, right-hand · 358.000.01

Bore holder with center point 9x4 mm, right-hand · 358.000.01

  • D=19.5mm
  • LT=40mm
  • S=M8
€11.50
€13.92 VAT incl.
Code:358.000.01
In stock
Drill holder with centring 9x4 mm, left · 358.000.02

Drill holder with centring 9x4 mm, left · 358.000.02

  • D=19,5mm
  • LT=40mm
  • S=M8
€11.50
€13.92 VAT incl.
Code:358.000.02
In stock
Drill holder, right hand D=19,5mm S=M10 B=10mm · 359.000.01

Drill holder, right hand D=19,5mm S=M10 B=10mm · 359.000.01

  • LT=46mm
  • RH (right-hand rotation)
€18.90
€22.87 VAT incl.
Code:359.000.01
In stock
Drill holder, left D=19,5mm S=M10 B=10mm · 359.000.02

Drill holder, left D=19,5mm S=M10 B=10mm · 359.000.02

  • LT=46mm
  • LH (left-hand)
€18.90
€22.87 VAT incl.
Code:359.000.02
In stock
Quick-change drill chuck for Biesse, right D=15mm B=10mm

Quick-change drill chuck for Biesse, right D=15mm B=10mm

  • D=15mm d=2mm
  • LT=37mm
  • RH (right-hand rotation)
€22.10
€26.74 VAT incl.
Code:360.001.01
In stock
Quick-change drill chuck for Biesse, left D=15mm B=10mm

Quick-change drill chuck for Biesse, left D=15mm B=10mm

  • D=15mm d=2mm
  • LT=37mm
  • LH (left-hand)
€22.10
€26.74 VAT incl.
Code:360.001.02
In stock

24 of 28 products shown

We use cookies to ensure the website functions properly. In addition, we place analytical cookies (Google Analytics, Microsoft Clarity) to analyse the use of the website. These are only placed after your consent. More information