Cutting tools: choice of 20,000 articles
Select language

Set rings

On a milling spindle, millimetres matter: the height at which a cutter block rotates directly determines where the profile ends up in the workpiece. Set rings for cutter heads are the simplest and most reliable way to fix this position exactly. This range includes more than one hundred versions: individual set rings in various sizes, such as 70 × 50 × 3 and 50 × 30 × 8 mm, shims, set rings for cutter heads and complete sets.

If you regularly change setups, it is best to choose a set with different thicknesses. By combining thin and thick set rings, you can adjust any desired height precisely without using improvised spacers. Always keep the rings clean and undamaged: one burr between two rings can tilt the entire cutter head on the spindle.

Read more about this category
Setting ring for cutter head D=70mm B=50mm P=22mm

Setting ring for cutter head D=70mm B=50mm P=22mm

  • D=70 x 50 K=33
€123.60
€149.56 VAT incl.
Code:695.998.15
In stock
Setting ring with pin holes for cutter head D=65mm B=30mm

Setting ring with pin holes for cutter head D=65mm B=30mm

  • D=65 x 30
  • 2x 0,1mm 4x 0,2mm 2x 0,5mm 2x 1mm 2x 2mm
  • Total 12 pieces
€76.30
€92.32 VAT incl.
Code:695.998.21
In stock
Setting ring with pin holes for cutter head D=65mm B=31,75mm

Setting ring with pin holes for cutter head D=65mm B=31,75mm

  • D=65 x 31,75
  • 2x 0,1mm 4x 0,2mm 2x 0,5mm 2x 1mm 2x 2mm
  • Total 12 pieces
€76.30
€92.32 VAT incl.
Code:695.998.22
On order
Setting ring with pin holes for cutter head D=60mm B=35mm

Setting ring with pin holes for cutter head D=60mm B=35mm

  • D=60 x 35
  • 2x 0.1mm 4x 0.2mm 2x 0.5mm 2x 1mm 2x 2mm
  • Total 12 pieces
€78.30
€94.74 VAT incl.
Code:695.998.23
Delivery time 1-2 weeks
Setting ring with pin holes for cutter head D=80mm B=40mm

Setting ring with pin holes for cutter head D=80mm B=40mm

  • D=65 x 40
  • 2x 0,1mm 4x 0,2mm 2x 0,5mm 2x 1mm 2x 2mm
  • Total 12 pieces
€152.20
€184.16 VAT incl.
Code:695.998.24
In stock
Setting ring with pin holes for cutter head D=80mm B=50mm

Setting ring with pin holes for cutter head D=80mm B=50mm

  • D=80 x 50
  • 2x 0,1mm 4x 0,2mm 2x 0,5mm 2x 1mm 2x 2mm
  • Total 12 pieces
€119.10
€144.11 VAT incl.
Code:695.998.25
In stock
Setting ring for glue joint cutter D=50mm B=30mm

Setting ring for glue joint cutter D=50mm B=30mm

  • D=50 x 30
  • P=2,6mm
  • Setting ring for 694.008.30
€25.80
€31.22 VAT incl.
Code:695.998.2630
In stock
Setting ring for glue joint cutter D=50mm B=31,75mm

Setting ring for glue joint cutter D=50mm B=31,75mm

  • D=50 x 31,75
  • P=2,6mm
  • Setting ring for 694.008.31
€86.60
€104.79 VAT incl.
Code:695.998.2631
Delivery time 1-2 weeks
Setting ring for glue joint cutter D=55mm B=35mm

Setting ring for glue joint cutter D=55mm B=35mm

  • D=55 x 35
  • P=2,6mm
  • Setting ring for 694.008.35
€25.80
€31.22 VAT incl.
Code:695.998.2635
In stock
Setting ring for glue joint cutter D=60mm B=40mm

Setting ring for glue joint cutter D=60mm B=40mm

  • D=60 x 40
  • P=2,6mm
  • Setting ring for 694.008.40
€33.00
€39.93 VAT incl.
Code:695.998.2640
In stock
Setting ring for glue joint cutter D=70mm B=50mm

Setting ring for glue joint cutter D=70mm B=50mm

  • D=70 x 50
  • P=2,6mm
  • Setting ring for 694.008.50
€33.00
€39.93 VAT incl.
Code:695.998.2650
Available soon
Setting rings for cutter head D=55mm B=30mm

Setting rings for cutter head D=55mm B=30mm

  • D=50 x 30
  • 3x 0,1mm 4x 0,2mm 3x 0,5mm 3x 1mm 1x 2mm 1x 3mm
  • Total 15 pieces
€94.60
€114.47 VAT incl.
Code:695.998.30
In stock
Setting ring for cutter head D=55mm B=30mm P=10,6mm

Setting ring for cutter head D=55mm B=30mm P=10,6mm

€11.80
€14.28 VAT incl.
Code:695.998.301
On order
Setting rings for cutter head D=55mm B=31,75mm

Setting rings for cutter head D=55mm B=31,75mm

  • D=50 x 31,75
  • 3x 0,1mm 4x 0,2mm 3x 0,5mm 3x 1mm 1x 2mm 1x 3mm
  • Total 15 pieces
€147.20
€178.11 VAT incl.
Code:695.998.31
Delivery time 1-2 weeks
Setting ring for cutter head D=55mm B=31,75mm P=10,6mm

Setting ring for cutter head D=55mm B=31,75mm P=10,6mm

  • D=55 x 31,75
  • 3x 0,1mm 4x 0,2mm 3x 0,5mm 3x 1mm 1x 2mm 1x 3mm
  • Total 15 pieces
€11.80
€14.28 VAT incl.
Code:695.998.311
On order
Setting rings for cutter head D=55mm B=35mm

Setting rings for cutter head D=55mm B=35mm

  • D=55 x 35
  • 3x 0,1mm 4x 0,2mm 3x 0,5mm 3x 1mm 1x 2mm 1x 3mm
  • Total 15 pieces
€94.60
€114.47 VAT incl.
Code:695.998.35
On order
Setting ring for cutter head D=55mm B=35mm P=10,6mm

Setting ring for cutter head D=55mm B=35mm P=10,6mm

  • D=55 x 35
  • 3x 0,1mm 4x 0,2mm 3x 0,5mm 3x 1mm 1x 2mm 1x 3mm
  • Total 15 pieces
€11.80
€14.28 VAT incl.
Code:695.998.351
In stock
Setting rings for cutter head D=55mm B=40mm

Setting rings for cutter head D=55mm B=40mm

  • D=60 x 40
  • 3x 0,1mm 4x 0,2mm 3x 0,5mm 3x 1mm 1x 2mm 1x 3mm
  • Total 15 pieces
€125.70
€152.10 VAT incl.
Code:695.998.40
In stock
Setting rings for cutter head 694.021.30 D=60mm B=30mm

Setting rings for cutter head 694.021.30 D=60mm B=30mm

  • D=60 x 30
  • 1x 0,1mm 2x 0,2mm 1x 0,5mm 1x 1mm 3x 2mm 2x 3mm
  • Total 10 pieces
€77.60
€93.90 VAT incl.
Code:695.998.41
In stock
Setting rings for cutterhead 694.021.31 D=60mm B=31,75mm

Setting rings for cutterhead 694.021.31 D=60mm B=31,75mm

  • D=60 x 31,75
  • 1x 0,1mm 2x 0,2mm 1x 0,5mm 1x 1mm 3x 2mm 2x 3mm
  • Total 10 pieces
€77.60
€93.90 VAT incl.
Code:695.998.42
In stock
Setting rings for cutter head D=60mm B=30mm

Setting rings for cutter head D=60mm B=30mm

€87.90
€106.36 VAT incl.
Code:695.998.46
In stock
Shim rings for cutter head 694.022.31 D=60mm B=31,75mm

Shim rings for cutter head 694.022.31 D=60mm B=31,75mm

  • D=60 x 31,75
  • 1x 0,1mm 2x 0,2mm 1x 0,5mm 3x 1mm 3x 2mm 3x 3mm
  • Total 13 pieces
€190.10
€230.02 VAT incl.
Code:695.998.47
In stock
Setting rings for cutter head D=80mm B=50mm

Setting rings for cutter head D=80mm B=50mm

€95.50
€115.56 VAT incl.
Code:695.998.50
In stock
Washer for screw 1/8 '

Washer for screw 1/8 '

  • Washer for screw 1 8
  • D7 x 3.2mm
€2.10
€2.54 VAT incl.
Code:990.400.00
In stock

24 of 108 products shown

About this category

Spacer rings for router and saw arbors

Spacer rings are precision rings that you slide onto a router or saw arbor to determine the tool height. They fill the space between the arbor shoulder and the tool and, in stacked cutter heads, keep the spacing exact. You will find spacer rings and shim rings from CMT and GRN Tools with a bore of 30, 35, 40, 50 or 60 mm and 31,75 mm (1 1/4 inch), smaller rings for glue-line trim routers and scoring saw blades, and thicknesses from 0,1 to 33 mm, individually or in sets.

Setting the height with a set of rings

With a set of rings in different thicknesses, you can set almost any height. Work like with a coin set: combine thicknesses to the desired size and note which combination you used, so you can later reset the same setting exactly. On stacked cutter heads, the rings between two discs determine the groove width or the distance between two profiles.

Flat, clean and fully on thread

A spacer ring must be perfectly flat and clean: one chip or a slight dent tilts the tool, and you will see that immediately as vibration marks in the workpiece. Check the rings for burrs and replace damaged ones. Also make sure that after stacking, the clamping nut still engages fully on the thread — a nut that only grips halfway is a real danger at high speeds.

What exactly are spacer rings used for?
They set the tool height on the spindle and, in stacked cutter heads, keep the spacing between discs or knives exact. Without spacer rings, you cannot set the profile height reproducibly.
How many rings may I stack?
As many as the free shaft length allows, with the clamping nut still fully on the thread. Never leave any thread unused above the nut, and reduce the speed when you stack multiple discs and rings.
Why does my tool vibrate after adjustment?
Usually there is a chip or dirt between two rings, or one ring is dented or not flat. Clean everything, check the rings for burrs and replace damaged ones.
Which thicknesses do I need?
A set with thicknesses from a few tenths to a few millimetres covers almost all settings. The thin rings are the most important: they make the difference between a profile that fits exactly and one that leaves a lip behind.
What bore should my spacer ring have?
The bore must be equal to the diameter of the shaft: on table-mounted routers usually 30, 35, 40 or 50 mm, on some machines 31,75 mm (1 1/4 inch). A ring with a bore that is too large does not centre properly and can throw the tool out of balance. Choose the outside diameter so that the ring bears flat against the tool.
Compiled by Garnotec’s specialist team — specialist in professional cutting tools for more than 30 years. Unsure which version suits your machine or material? Contact our team · View the full range

We use cookies to ensure the website functions properly. In addition, we place analytical cookies (Google Analytics, Microsoft Clarity) to analyse the use of the website. These are only placed after your consent. More information