Cutting tools: choice of 20,000 articles
Select language

Pressure pads

Insert knives are only held securely in a cutter body when they are pressed in by the correct clamping element. This category pressure pads for insert knives includes clamp blocks that hold knives and other accessories firmly in tool bodies. You will find various versions, including left-hand and right-hand variants and size-specific pressure pads, such as 12-12,7 mm.

Clamp blocks are continuously subjected to clamping force, vibration and resin build-up. Therefore check them regularly and replace them in time if worn or damaged. At every knife change, check whether the clamping face is free of burrs and deformation. A clamp block that no longer sits flat will clamp the knife locally and may cause it to move at high speeds. Always order pressure pads to match the original cutter body: shape and size are decisive for the safe operation of the rotating tool.

Read more about this category
Clamping block for profile knife L=48mm K=11mm H=6mm

Clamping block for profile knife L=48mm K=11mm H=6mm

  • 48X6X11
€38.60
€46.71 VAT incl.
Code:695.999.48
In stock
Clamping block for profile knife L=49mm K=11mm H=9,5mm

Clamping block for profile knife L=49mm K=11mm H=9,5mm

  • 49X11X9,5
€38.60
€46.71 VAT incl.
Code:695.999.49
In stock
Clamping block for profile knife art. 695.013.A2 L=53mm K=11mm

Clamping block for profile knife art. 695.013.A2 L=53mm K=11mm

  • 53X11X9,5
€49.10
€59.41 VAT incl.
Code:695.999.53
In stock

3 of 51 products shown

About this category

Pressure pieces and clamping blocks for profile knives in cutter heads

A profile knife is only securely held in the cutter head when it is clamped by the correct clamping block. In this category you will find the pressure pieces from CMT and GRN Tools: clamping blocks in aluminium and steel for profile knives and limiters, left- and right-hand versions, clamping wedges, holders for chamfering, rounding and groove teeth, and a replacement kit with two clamping blocks and a screw. Most belong to the cutter heads of the 695 series.

The clamping block and the knife belong to the same head

A clamping block is not a universal component: width, thickness and the shape of the contact surface are matched to the cutter head and to the knives that fit in it. So always order the clamping block that belongs to your head, and for heads with left- and right-hand positions, pay attention to the correct version. If in doubt, compare the dimensions in the product description, such as 38 × 6 × 12 mm, with the old block, or send us the article number of your cutter head.

Check at every knife change

A clamping block is under clamping force and vibration with every rotation. At every knife change, check whether the contact surface is flat and free of burrs, dents and resin build-up, and whether the clamping screw still grips properly. A block that no longer sits flat clamps the knife only locally, which can cause it to shift at high speeds. Replace a damaged block immediately and, if in doubt, also replace the screw; matching bolts can be found among the parts, new profile knives among the knives.

What is the difference between a pressure piece and a clamping block?
In practice it is the same component: the block that, with a screw or wedge, presses the knife against the body of the cutter head. At CMT and GRN Tools it is usually called a clamping block. In this category you will find it together with clamping wedges and tooth holders.
Can I use a clamping block from another cutter head?
Only if it has exactly the same dimensions and the same shape. A block that is too narrow, too thin or shaped differently will not clamp the knife over its full length, and with a rotating head that is a safety risk. So order the clamping block that belongs to your cutter head.
Why are there left- and right-hand clamping blocks?
Some cutter heads have knives or teeth in positions that are mirror images of each other. For that purpose, left- and right-hand clamping blocks and holders exist. When ordering, check which position you are replacing: a block from the wrong side will not fit in the seat and will not clamp the knife correctly.
When do I replace a clamping block?
As soon as the contact surface shows burrs, dents or deformation, if the thread in the block is damaged, or if a knife can still move after tightening. Then use a new clamping screw immediately as well; the replacement kit contains two clamping blocks and a screw for this purpose.
Compiled by Garnotec’s specialist team — specialist in professional cutting tools for more than 30 years. Unsure which version suits your machine or material? Contact our team · View the full range

We use cookies to ensure the website functions properly. In addition, we place analytical cookies (Google Analytics, Microsoft Clarity) to analyse the use of the website. These are only placed after your consent. More information