Pressure pads
Insert knives are only held securely in a cutter body when they are pressed in by the correct clamping element. This category pressure pads for insert knives includes clamp blocks that hold knives and other accessories firmly in tool bodies. You will find various versions, including left-hand and right-hand variants and size-specific pressure pads, such as 12-12,7 mm.
Clamp blocks are continuously subjected to clamping force, vibration and resin build-up. Therefore check them regularly and replace them in time if worn or damaged. At every knife change, check whether the clamping face is free of burrs and deformation. A clamp block that no longer sits flat will clamp the knife locally and may cause it to move at high speeds. Always order pressure pads to match the original cutter body: shape and size are decisive for the safe operation of the rotating tool.
Filters
Availability
K (thickness)
Brand
L (total length) in mm
L1 (length 1) in mm
Rotation direction












Clamping block for profile knife, cutter (3) L=11mm K=7mm
- 7X11X9,5

Clamping block for profile knife art. 695.013.A1 L=16mm K=11mm
- 16X11X9,5

Clamping block for profile knife L=17mm K=11mm H=9,5mm
- 17X11X9,5

Clamping block for profile knife L=22mm K=9,5mm H=11mm
- 22X11X9,5

Clamping block for profile knife, cutter (1) L=23mm K=11mm
- 23X11X9,5

Clamping block for profile knife, cutter (2) L=23mm K=11mm
- 24X11X9,5

Clamping block for profile knife L=31mm K=11mm H=9,5mm
- 31X11X9,5

Clamping block for profile knife L=38mm K=11mm H=9,5mm
- 38X11X9,5

Clamping block for profile knife L=39mm K=11mm H=9,5mm
- 39X11X9,5

Clamping block for profile knife L=41mm K=9,5mm H=11mm
- 41X11X9,5

Clamping block for profile knife L=42mm K=11mm H=9,5mm
- 42X11X9,5

Clamping block for profile knife L=46mm K=11mm H=9,5mm
- 46X11X9,5
24 of 51 products shown
Pressure pieces and clamping blocks for profile knives in cutter heads
A profile knife is only securely held in the cutter head when it is clamped by the correct clamping block. In this category you will find the pressure pieces from CMT and GRN Tools: clamping blocks in aluminium and steel for profile knives and limiters, left- and right-hand versions, clamping wedges, holders for chamfering, rounding and groove teeth, and a replacement kit with two clamping blocks and a screw. Most belong to the cutter heads of the 695 series.
The clamping block and the knife belong to the same head
A clamping block is not a universal component: width, thickness and the shape of the contact surface are matched to the cutter head and to the knives that fit in it. So always order the clamping block that belongs to your head, and for heads with left- and right-hand positions, pay attention to the correct version. If in doubt, compare the dimensions in the product description, such as 38 × 6 × 12 mm, with the old block, or send us the article number of your cutter head.
Check at every knife change
A clamping block is under clamping force and vibration with every rotation. At every knife change, check whether the contact surface is flat and free of burrs, dents and resin build-up, and whether the clamping screw still grips properly. A block that no longer sits flat clamps the knife only locally, which can cause it to shift at high speeds. Replace a damaged block immediately and, if in doubt, also replace the screw; matching bolts can be found among the parts, new profile knives among the knives.
What is the difference between a pressure piece and a clamping block?
Can I use a clamping block from another cutter head?
Why are there left- and right-hand clamping blocks?
When do I replace a clamping block?
Related categories
- Locking ring
- Cutters
- Ball bearings
- Saws
- Drills
- Bushing enlargers
- Knives
- Reducer rings
- CNC accessories
- Set rings
- Machines & accessories
- Adapters
- Fan Items
- Drill holders for dowel drills
- Collet Chucks
- Sharpening and Adjustment Service
- Bolts
- Nuts
- Keys
- Dovetail joint parts
- Parts for mortising machines
- Machine parts
- Other parts