Cutting tools: choice of 20,000 articles
Select language

Ball bearings

A ball bearing in guided-cutter routing is a wear part: the bearing runs against the workpiece or template and thus determines the cutting depth. If the bearing no longer turns smoothly, the track burns into your workpiece — time to replace only the ball bearing instead of the complete cutter.

In this category you will find standard ball bearings and Delrin bearings in all common sizes (inner diameter × outer diameter) for CMT cutters with guide bearing. When ordering, measure the inner and outer diameter of your current bearing, or search by the article number of your cutter. With a new bearing, your straight cutter, rounding cutter or profiling cutter will once again cut cleanly along the template.

Also available separately: matching retaining rings and screws to mount the bearing.

Read more about this category
Standard ball bearing D=16mm B=8mm P=5mm

Standard ball bearing D=16mm B=8mm P=5mm

  • D=16 x 8 P=5
€10.20
€12.34 VAT incl.
Code:791.025.00
In stock
Standard ball bearing D=28mm B=12mm P=8mm

Standard ball bearing D=28mm B=12mm P=8mm

  • D=28 x 12 P=8
€8.60
€10.41 VAT incl.
Code:791.026.00
In stock
Standard ball bearing D=28,5mm B=12,7mm P=8mm

Standard ball bearing D=28,5mm B=12,7mm P=8mm

  • D=28,5 x 12,7 P=8
€9.80
€11.86 VAT incl.
Code:791.027.00
In stock
Standard ball bearing D=37mm B=12mm P=12mm

Standard ball bearing D=37mm B=12mm P=12mm

  • D=37 x 12 P=12
€13.20
€15.97 VAT incl.
Code:791.028.00
In stock
Standard ball bearing D=34,9mm B=12,7mm P=11mm

Standard ball bearing D=34,9mm B=12,7mm P=11mm

  • D=34,9 x 12,7 P=11
€13.20
€15.97 VAT incl.
Code:791.029.00
In stock
Standard ball bearing D=28,5mm B=8mm P=8,5mm

Standard ball bearing D=28,5mm B=8mm P=8,5mm

  • D=28,5 x 8 P=8,5
€15.60
€18.88 VAT incl.
Code:791.030.00
In stock
Standard ball bearing D=34,9mm B=8mm P=11,6mm

Standard ball bearing D=34,9mm B=8mm P=11,6mm

  • D=34,9 x 8 P=11,6
€19.10
€23.11 VAT incl.
Code:791.031.00
In stock
Standard ball bearing D=31,7mm B=8mm P=5mm

Standard ball bearing D=31,7mm B=8mm P=5mm

  • D=31,7 x 8 P=5
€13.20
€15.97 VAT incl.
Code:791.033.00
In stock
Standard ball bearing D=19mm B=8mm P=6mm

Standard ball bearing D=19mm B=8mm P=6mm

  • D=19 x 8 P=6
€17.50
€21.18 VAT incl.
Code:791.034.00
In stock
Standard ball bearing D=6,35mm B=3,17mm P=2,8mm

Standard ball bearing D=6,35mm B=3,17mm P=2,8mm

  • D=6,35 x 3,17 P=2,8
€5.30
€6.41 VAT incl.
Code:791.035.00
In stock
Standard ball bearing D=24mm B=8mm P=8mm

Standard ball bearing D=24mm B=8mm P=8mm

  • D=24 x 8 P=8
€13.20
€15.97 VAT incl.
Code:791.036.00
In stock
Standard ball bearing D=28mm B=8mm P=9mm

Standard ball bearing D=28mm B=8mm P=9mm

  • D=28 x 8 P=9
€13.20
€15.97 VAT incl.
Code:791.037.00
In stock
Delrin® conical ball bearing D=19mm

Delrin® conical ball bearing D=19mm

  • D=19 x 4,76 P=6,8
€17.20
€20.81 VAT incl.
Code:791.041.00
In stock
Delrin® triangular ball bearing D=12,7mm P=5,8mm

Delrin® triangular ball bearing D=12,7mm P=5,8mm

  • D=12,7 x 4,76 P=5,8
€17.40
€21.05 VAT incl.
Code:791.042.00
In stock
Delrin® triangular ball bearing D=19mm P=7mm

Delrin® triangular ball bearing D=19mm P=7mm

  • D=19 x 4,76 P=7
€17.40
€21.05 VAT incl.
Code:791.043.00
In stock
Delrin® straight ball bearing D=12,7mm B=4,76mm P=5mm

Delrin® straight ball bearing D=12,7mm B=4,76mm P=5mm

  • D=12,7 x 4,76 P=5
€14.50
€17.55 VAT incl.
Code:791.044.00
In stock
Delrin® straight ball bearing D=15,87mm B=4,76mm P=7,2mm

Delrin® straight ball bearing D=15,87mm B=4,76mm P=7,2mm

  • D=15,87 x 4,76 P=7,2
€12.60
€15.25 VAT incl.
Code:791.045.00
In stock
Delrin® straight ball bearing D=19,05mm B=4,76mm P=6,8mm

Delrin® straight ball bearing D=19,05mm B=4,76mm P=6,8mm

  • D=19,05 x 4,76 P=6,8
€12.60
€15.25 VAT incl.
Code:791.046.00
In stock
Delrin® straight ball bearing D=37,4mm B=12,7mm P=15,7mm

Delrin® straight ball bearing D=37,4mm B=12,7mm P=15,7mm

  • D=37,4 x 12,7 P=15,7
€12.60
€15.25 VAT incl.
Code:791.047.00
In stock
Delrin® conical ball bearing D=22mm

Delrin® conical ball bearing D=22mm

  • D=22 x 4,76 P=6,8
€12.60
€15.25 VAT incl.
Code:791.048.00
In stock
Delrin® straight ball bearing D=25,4mm B=4,76mm P=6,8mm

Delrin® straight ball bearing D=25,4mm B=4,76mm P=6,8mm

  • D=25,4 x 4,76 P=6.,8
€12.60
€15.25 VAT incl.
Code:791.049.00
In stock
Standard ball bearing D=62mm B=30mm P=16mm

Standard ball bearing D=62mm B=30mm P=16mm

  • D=62 x 30 P=16
€33.00
€39.93 VAT incl.
Code:791.051.00
In stock
Standard ball bearing D=62mm B=35mm P=14mm

Standard ball bearing D=62mm B=35mm P=14mm

  • D=62 x 35 P=14
€33.00
€39.93 VAT incl.
Code:791.052.00
In stock
Standard ball bearing D=80mm B=50mm P=16mm

Standard ball bearing D=80mm B=50mm P=16mm

  • D=80 x 50 P=16
€33.00
€39.93 VAT incl.
Code:791.053.00
In stock

24 of 67 products shown

About this category

Ball bearings for routers: spare bearings, Delrin® bearings and starting rings

The ball bearing on a router runs against the edge of the workpiece or against the template and thus determines how deep the cutter cuts. It is also the part that wears first. Here you will find the loose ball bearings from CMT and GRN Tools for routers with guide bearing: standard bearings, Delrin® bearings in straight, conical or triangular shape, ball bearing sets and starting rings with a bore from 30 to 50 mm for the table router.

Determining the correct size

A ball bearing is defined by three dimensions: the inner diameter or bore, the outer diameter and the thickness. The bore must fit exactly on the spindle of your router; in this category, 4.76 mm (3/16 inch), 8 mm and 12.7 mm (1/2 inch) are the most common bores. The outer diameter determines the cutting depth: a bearing that differs by half a millimeter changes your profile, even if it fits on the spindle. Measure the old bearing with a caliper or start from the article number of your router.

When replacing a bearing

Turn the bearing by hand for each series. If you feel play, hear grinding, or if it does not run smoothly, replace it immediately — that costs less than one damaged workpiece. Always replace it after a blockage as well: a bearing that has seized has suffered heat damage, even if it turns again. Clean the spindle before fitting the new bearing.

How do I know which ball bearing fits my router?
Measure the bore, outer diameter and thickness of the old bearing with a caliper, or start from the article number of the router. Pay attention to inch sizes: 4.76 mm and 12.7 mm are common. A bearing with a different outer diameter changes the cutting depth.
Can I fit a bearing with a different diameter?
Yes, and that is done on purpose: a smaller bearing lets the cutter go deeper, so with the same cutter you can make a wider rebate or a deeper radius. The bore and thickness must fit exactly; first check the result on scrap wood.
Why does my workpiece burn under the bearing?
Almost always because the bearing no longer turns freely and drags over the wood instead of rolling. Replace the bearing and clean the spindle; resin build-up on the spindle will make a new bearing seize just as quickly.
How often should I replace bearings?
As soon as you feel play or hear noise. In daily production work, a bearing is a wear part; keep a spare bearing on hand for your most used cutters. Also always replace it after a blockage, even if the bearing seems to run normally again afterwards.
What is a Delrin® ball bearing?
A ball bearing with a race in Delrin®, a hard plastic, instead of steel. You choose it where a steel bearing would leave pressure marks or traces on the workpiece or the template. Besides straight Delrin® bearings, there are also conical and triangular versions for specific cutters.
Compiled by Garnotec’s specialist team — specialist in professional cutting tools for more than 30 years. Unsure which version suits your machine or material? Contact our team · View the full range

We use cookies to ensure the website functions properly. In addition, we place analytical cookies (Google Analytics, Microsoft Clarity) to analyse the use of the website. These are only placed after your consent. More information