Ball bearings
A ball bearing in guided-cutter routing is a wear part: the bearing runs against the workpiece or template and thus determines the cutting depth. If the bearing no longer turns smoothly, the track burns into your workpiece — time to replace only the ball bearing instead of the complete cutter.
In this category you will find standard ball bearings and Delrin bearings in all common sizes (inner diameter × outer diameter) for CMT cutters with guide bearing. When ordering, measure the inner and outer diameter of your current bearing, or search by the article number of your cutter. With a new bearing, your straight cutter, rounding cutter or profiling cutter will once again cut cleanly along the template.
Also available separately: matching retaining rings and screws to mount the bearing.
Filters
Availability
D (diameter) in mm
B (bore) in mm
Brand

Standard ball bearing D=9,5mm B=3,2mm P=4mm
- D=9,5 x 3.2 P=4

Standard ball bearing D=9,5mm B=4,76mm P=3,2mm
- D=9,5 x 4,76 P=3,2

Standard ball bearing D=12,7mm B=4,76mm P=5mm
- D=12,7 x 4,76 P=5

Standard ball bearing D=19mm B=6,35mm P=7mm
- D=19 x 6,35 P=7





Standard ball bearing D=15,8mm B=6,35mm P=5mm
- D=15,8 x 6,35 P=5

Standard ball bearing D=12,7mm B=6,35mm P=4,8mm
- D=12,7 x 6,35 P=4,8

Standard ball bearing D=19mm B=12,7mm P=4mm
- D=19 x 12,7 P=4


Standard ball bearing D=22,2mm B=12,7mm P=7mm
- D=22,2 x 12,7 P=7

Standard ball bearing D=28,5mm B=4,76mm P=8,4mm
- D=28,5 x 4,76 P=8,4

Standard ball bearing D=31,7mm B=12,7mm P=8mm
- D=31,7 x 12,7 P=8

Standard ball bearing D=34,9mm B=4,76mm P=11,5mm
- D=34,9 x 4,76 P=11,5

Standard ball bearing D=22,2mm B=4,76mm P=7,5mm
- D=22,2 x 4,76 P=7,5

Standard ball bearing D=15,8mm B=4,76mm P=5mm
- D=15,8 x 4,76 P=5

Standard ball bearing D=19mm B=4,76mm P=7,5mm
- D=19 x 4,76 P=7,5

Standard ball bearing D=38,1mm B=12,7mm P=13,3mm
- D=38,1 x 12,7 P=13,3

Standard ball bearing D=22,2mm B=9,52mm P=7mm
- D=22,2 x 9,52 P=7



24 of 67 products shown
Ball bearings for routers: spare bearings, Delrin® bearings and starting rings
The ball bearing on a router runs against the edge of the workpiece or against the template and thus determines how deep the cutter cuts. It is also the part that wears first. Here you will find the loose ball bearings from CMT and GRN Tools for routers with guide bearing: standard bearings, Delrin® bearings in straight, conical or triangular shape, ball bearing sets and starting rings with a bore from 30 to 50 mm for the table router.
Determining the correct size
A ball bearing is defined by three dimensions: the inner diameter or bore, the outer diameter and the thickness. The bore must fit exactly on the spindle of your router; in this category, 4.76 mm (3/16 inch), 8 mm and 12.7 mm (1/2 inch) are the most common bores. The outer diameter determines the cutting depth: a bearing that differs by half a millimeter changes your profile, even if it fits on the spindle. Measure the old bearing with a caliper or start from the article number of your router.
When replacing a bearing
Turn the bearing by hand for each series. If you feel play, hear grinding, or if it does not run smoothly, replace it immediately — that costs less than one damaged workpiece. Always replace it after a blockage as well: a bearing that has seized has suffered heat damage, even if it turns again. Clean the spindle before fitting the new bearing.
How do I know which ball bearing fits my router?
Can I fit a bearing with a different diameter?
Why does my workpiece burn under the bearing?
How often should I replace bearings?
What is a Delrin® ball bearing?
Related categories
- Locking ring
- Cutters
- Saws
- Bushing enlargers
- Drills
- Reducer rings
- Knives
- Set rings
- CNC accessories
- Pressure pads
- Machines & accessories
- Adapters
- Drill holders for dowel drills
- Fan Items
- Collet Chucks
- Sharpening and Adjustment Service
- Bolts
- Nuts
- Keys
- Dovetail joint parts
- Parts for mortising machines
- Machine parts
- Other parts