Collet Chucks
Between the machine spindle and the collet sits the collet chuck holder: the intermediate piece that determines which tools you can mount on your machine. In this category you will find holders that convert from threaded connection to taper shank connection, cutter arbor mandrels and complete combinations of collet and clamping nut.
With the right holder, you greatly expand the versatility of your machine: a cutter with shank suddenly fits on a spindle with threaded connection, or you use shank cutters on a machine that was not originally intended for them. When choosing, pay attention to both sides of the connection — the machine-side fitting and the collet size on the tool side — and tighten the clamping nut with the proper tool instead of using force: over-tightening deforms the collet and nut.
Filters
B (bore) in mm
S (shank) special
D3 (diameter 3)
L (total length) in mm
L1 (length 1) in mm
Rotation direction

Collet chucks (from threaded connection to collet connection) S=M12x1 L=38mm
- S1=M12x1 L=38mm
- Collet 6 - 6,35 - 8 -9,5 optional

Router holder arbor L=88mm · 796.001.00
- S=12,7mm L=88mm
- Delivered with 12,7mm collet
- Collet 10 - 12 - 12,7 optionally available

Router holder arbor L=81mm · 796.001.01
- S=12,7mm L=81mm
- Supplied with collet chuck 6,35mm
- Collet chuck 6 - 6,35 - 8 -9,5 available as an option

Router holder arbor L=88mm · 796.002.00
- S=12mm L=88mm
- Supplied with 12mm collet
- Collet 10 - 12 - 12,7 optionally available

Router holder arbor L=81mm · 796.002.01
- S=12mm L=81mm
- Supplied with 8mm collet
- Collet chuck 6 - 6,35 - 8 -9,5 optionally available

Collet chucks (from threaded connection to collet connection) S=M10x1,5 L=38mm
- S1=M10x1,5 L=38mm
- Collet chuck 6 - 6,35 - 8 -9,5 optionally available

Collet chucks (from threaded connection to collet connection) S=M12x1 L=47mm
- S1=M12x1 L=38mm
- Collet 10 - 12 - 12,7 possible as option

Cutter holder arbor (ER20) S=M12x1,75
- S1=M12x1,75 L=43mm
- Collet 3 to 12,7mm optionally available

Router holder arbor S=M14x2 L=57mm LB=32mm
- S1=M14x2 L=32mm
- Collet 6 - 6,35 - 8 -9,5 available as option

Router holder arbor · 796.141.00
- S1=M14x2 L=38mm
- Collet 10 - 12 - 12,7 possible as option

Cutter holder arbor (ER20) · 796.142.00
- S1=M14x2 L=43mm
- Collet chuck 3 to 12,7mm optionally available

Router holder arbor S=M16x2 L=57mm LB=32mm
- S1=M16x2 L=32mm
- Collet 6 - 6,35 - 8 -9,5 optionally available

Router holder arbor S=M16x2 L=63mm LB=38mm
- S1=M16x2 L=38mm
- Collet 10 - 12 - 12,7 optionally available

Cutter holder arbor (ER20) S=M16x2
- S1=M16x2 L=43mm
- Collet chuck 3 to 12,7mm optionally available


Collet for cutter arbor B=6,35mm
- S=6,35
- For collet chuck 796


Collet for cutter arbor B=9,5mm
- S=9,52
- For collet holder 796

Collet for cutter arbor B=10mm
- S=10
- For collet chuck holder 796

Collet for cutter arbor B=12mm
- S=12
- For collet chuck holder 796

Collet for cutter arbor B=12,7mm
- S=12,7
- For collet chuck 796

Collet + clamp nut B=6mm
- S=6 + clamp nut
- Suitable for CMT7E

Collet + clamp nut B=6,35mm
- S=6,35 + clamping nut
- Suitable for CMT7E

Collet + clamp nut B=8mm
- S=8 + clamping nut
- Suitable for CMT7E
24 of 35 products shown
Related categories
- Cutters
- Locking ring
- Ball bearings
- Saws
- Bushing enlargers
- Drills
- Reducer rings
- Knives
- Set rings
- CNC accessories
- Machines & accessories
- Pressure pads
- Adapters
- Fan Items
- Drill holders for dowel drills
- Bolts
- Sharpening and Adjustment Service
- Nuts
- Keys
- Dovetail joint parts
- Parts for mortising machines
- Machine parts
- Other parts