Adapters
A drill chuck or milling spindle rarely connects directly to every tool you want to use. The adapters for drilling and milling in this parts category bridge that difference. Here you will find shanks for interchangeable drills and hinge-boring bits, conical shanks for interchangeable cutter heads, threaded transitions and extensions, as well as adapters for HWM drills. This lets you use one machine holder for a wide range of cutting tools.
With more than fifty references, it is important to choose systematically: always start from the mounting of your machine and from there select the right adapter for your tool. Also limit the number of linked transitions. Every extra adapter can cause a small deviation or runout, which becomes immediately visible in finishing quality when drilling at high speeds. One correctly fitting adapter is always better than two stacked adapters.
Filters
B (bore) in mm
L1 (length 1) in mm
S (shank) in mm
S (shank) special
Rotation direction
L1 (length 1) special
L (total length) in mm
S1 (shank diameter 1)

Adapter with clamping screw B=2mm · 364.020.00
- B=2 S=10
- L=28 L1=20
- For HWM drills

Adapter with clamping screw B=2,5mm · 364.025.00
- B=2,5 S=10
- L=28 L1=20
- For HWM drills

Adapter with clamping screw B=3mm · 364.030.00
- B=3 S=10
- L=28 L1=20
- For HWM drills

Adapter with clamping screw B=3,2mm · 364.032.00
- B=3.2 S=10
- L=28 L1=20
- For HWM drills

Adapter with clamping screw B=3,5mm · 364.035.00
- B=3,5 S=10
- L=28 L1=20
- For HWM drill bits

Adapter with clamping screw B=4mm · 364.040.00
- B=4 S=10
- L=28 L1=20
- For HWM drills

Adapter with clamping screw B=4,5mm · 364.045.00
- B=4,5 S=10
- L=28 L1=20
- For HWM drills

Adapter with clamping screw B=5mm · 364.050.00
- B=5 S=10
- L=28 L1=20
- For HWM drills


Adapter for HWM drills B=2,5mm · 365.025.00
- B=2,5 S=10
- L=23


Adapter for HWM drills B=3,2mm · 365.032.00
- B=3,2 S=10
- L=23

Adapter for HWM drills B=3,5mm · 365.035.00
- B=3,5 S=10
- L=23


Adapter for HWM drills B=4,5mm · 365.045.00
- B=4,5 S=10
- L=23



Threaded adaptor for interchangeable heads S=M10/30° LB=25mm · 503.250.01
- S=M12x1 M10 conical 30°
- RH (right-hand rotating)

Threaded adaptor for interchangeable heads S=M10/30° LB=25mm · 503.250.02
- S=M12x1 M10 taper 30°
- LH (left-hand rotation)

Extension with hex shank connection B=8mm L1=294mm
- B=8mm D1=13mm
- L=330mm

Extension with hex shank connection B=9,52mm L1=290mm
- B=9,52mm D1=22mm
- L=330mm

Extension with hex shank connection B=10mm L1=290mm
- B=10mm D1=22mm
- L=330mm

Long shank for interchangeable drill or hinge boring bit S=13mm · 509.130.01
- S=13 x 50 LB=100
- S1=M12x1
- RH (right-hand rotation)

Long shank for interchangeable drill or hinge boring bit S=16mm · 509.160.01
- S=16 x 50 LB=100
- S1=M12x1
- RH (clockwise)
24 of 41 products shown
Related categories
- Cutters
- Locking ring
- Saws
- Ball bearings
- Bushing enlargers
- Drills
- Knives
- Reducer rings
- Set rings
- CNC accessories
- Machines & accessories
- Pressure pads
- Drill holders for dowel drills
- Fan Items
- Collet Chucks
- Bolts
- Sharpening and Adjustment Service
- Nuts
- Keys
- Dovetail joint parts
- Parts for mortising machines
- Machine parts
- Other parts