Cylinder Head Drills – Flat Shank
For the precise drilling of flat-bottom holes on industrial machines, these cylindrical head drills with flat shank offer a reliable solution. The flat shank ensures a secure, slip-free grip in the drill chuck, essential when drilling with the high torque of machine drilling.
The range of cylindrical head drills includes a wide choice of diameters, available in right-hand and usually also left-hand versions. When choosing, always pay attention to the rotation direction of the machine spindle: a left-hand drill belongs on a left-hand rotating spindle. When a high-quality finish is required, it is best to choose a version with pre-cutters and chip breakers.
What diameter should the borehole be?
Filters
Availability
Connection type
D (diameter) in mm
Cutting material
L (total length) in mm
S (shank) in mm
L1 (length 1) in mm
Line
Rotation direction
Chip breaker

Cylinder head drill D=14, right-hand L=57,5mm L1=26mm
- D=14mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cutterhead drill D=14, left L=57,5mm
- D=14mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill bit D=15, right-hand S=10mm L=57,5mm L1=26mm · 317.150.11
- D=15mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=15, left-hand L=57,5mm · 317.150.12
- D=15mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill bit D=15, right-hand S=10mm L=57,5mm L1=26mm · 317.150.41
- D=15mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=15, left-hand L=57,5mm · 317.150.42
- D=15mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill bit D=15, right-hand S=10mm L=57,5mm L1=26mm · 317.150.61
- D=15mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=15, left-hand L=57,5mm · 317.150.62
- D=15mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=16, right S=10mm L=57,5mm L1=26mm
- D=16mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=16, left L=57,5mm
- D=16mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=17, right-hand L=57,5mm L1=26mm
- D=17mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=17, left D=17mm S=10mm
- LT=57,5mm
- S=10x26mm Z2+V2
- LH (left-hand rotation) HW

Cylinder head drill D=18, right-hand S=10mm L=57,5mm L1=26mm · 317.180.11
- D=18mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=18, left L=57,5mm L1=26mm · 317.180.12
- D=18mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=18, right-hand S=10mm L=57,5mm L1=26mm · 317.180.41
- D=18mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=18, left L=57,5mm L1=26mm · 317.180.42
- D=18mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=19, right-hand L=57,5mm L1=26mm
- D=19mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=19, left-hand D=19mm S=10mm
- LT=57,5mm
- S=10x26mm Z2+V2
- LH (left-hand rotation) HW

Cylinder head drill D=20, right-hand S=10mm L=57,5mm L1=26mm · 317.200.11
- D=20mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=20, left L=57,5mm L1=26mm · 317.200.12
- D=20mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=20, right-hand S=10mm L=57,5mm L1=26mm · 317.200.41
- D=20mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=20, left L=57,5mm L1=26mm · 317.200.42
- D=20mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=22, right hand S=10mm L=57,5mm L1=26mm
- D=22mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=22, left L=57,5mm
- D=22mm
- LT=57,5mm
- S=10x26mm Z2+V2
24 of 139 products shown
Industrial dowel drills with flat shank
These dowel drills have a shank with a flat: a flattened section on which the drill chuck clamping screw grips. This prevents the drill from rotating or slipping down, even at the high feed rates of a CNC drilling machine or a multi-spindle head in production.
Why a flat shank?
In series production, a drill is moved into and out of the material dozens of times per minute. A smooth shank can slip in the holder under that load, causing the drilling depth to drift and the hole to become too deep or too shallow. The flat shank provides a mechanical grip for the clamping screw, so the drill stays exactly in place — hole after hole, hour after hour.
Check protrusion and depth
When mounting, protrusion matters: slide the drill fully into the holder up to the stop and tighten the clamping screw on the flat shank. Then check the drilling depth on scrap material, because a drill that protrudes one millimeter further drills one millimeter deeper — with hinge holes, that is exactly the difference between a good hole and breakthrough at the front face.