Square mortise bits
A square mortise bit — square mortising bit — bores and chops a square hole in one movement: the centre auger drills away the wood, while the square chisel around it cuts out the corners. This lets you make perfect holes for mortise-and-tenon joints on the mortising machine in one operation. Here you will find square mortising bits in the common sizes, plus the matching adapters to mount the bits on your machine. Drill and chisel are supplied ground to each other; keep the chisel sharp with a fine sharpening stone for consistently crisp corners. Tip: set the chisel a fraction higher than the drill point — the drill should always cut just before the chisel chops.
What diameter should the borehole be?
Filters
Brand
L (total length) in mm
D (diameter) in mm
I (effective cutting length) in mm
Material to be machined

Square mortising adapter
- Quick assembly
- 4 drill bits included
- In plastic case

Square mortising bit D=6,35mm L=110mm I=45mm
- I=45mm LT=110mm
- S=19 Z1
- RH (right-hand rotating) HSS

Square mortising bit D=8mm L=113mm I=45mm
- I=45mm LT=113mm
- S=19 Z1
- RH (right-hand rotation) HSS

Square mortising bit D=9,5mm L=143mm I=75mm
- I=75mm LT=143mm
- S=19 Z1
- RH (right-hand) HSS

Square mortising bit D=12,7mm L=141mm I=70mm
- I=70mm LT=141mm
- S=19 Z1
- RH (right-hand) HSS

Square mortising bit D=15,8mm L=160mm I=88mm
- I=88mm LT=160mm
- S=19 Z1
- RH (right-hand rotation) HSS

Square mortising bit D=19mm L=157mm I=88mm
- I=88mm LT=157mm
- S=19 Z1
- RH (right-hand rotation) HSS