Cylinder-head bits – Threaded shank
Certain industrial drilling machines hold tools by means of threads. For these machines there are cylinder-head bits with threaded shank. The bit is screwed directly onto the spindle, providing a firm, play-free mounting. This is essential when hinge holes or blind holes must be drilled in series, exactly at the same position and depth.
The range includes diameters from 20 to 60 mm. Each cylinder-head bit is available in a left- and right-hand version, matched to the alternating rotation direction of multi-spindle drill heads. When replacing, always check both the rotation direction and the diameter of the existing bit: a left-hand bit on a right-hand spindle does not cut, it rubs. This causes burn marks.
What diameter should the borehole be?
Filters
Availability
D (diameter) in mm

Cylinder head drill D=20, right-hand L=30mm · 501.200.11
- D=20mm
- LT=30mm
- S=M12x1 Z2+V2

Cylinder head drill D=22, right hand L=30mm · 501.220.11
- D=22mm
- LT=30mm
- S=M12x1 Z2+V2

Cylindrical head drill D=24, right-hand L=30mm · 501.240.11
- D=24mm
- LT=30mm
- S=M12x1 Z2+V2

Cylinder head drill D=25, right L=30mm · 501.250.11
- D=25mm
- LT=30mm
- S=M12x1 Z2+V2

Cylinder head drill D=26, right-hand L=30mm · 501.260.11
- D=26mm
- LT=30mm
- S=M12x1 Z2+V2

Cylinder head drill D=30, right-hand L=30mm · 501.300.11
- D=30mm
- LT=30mm
- S=M12x1 Z2+V2

Cylinder Head Drill D=32, right L=30mm · 501.320.11
- D=32mm
- LT=30mm
- S=M12x1 Z2+V2

Cylinder head drill D=34, right-hand L=30mm · 501.340.11
- D=34mm
- LT=30mm
- S=M12x1 Z2+V2

Cylinder head drill D=35, right hand L=30mm · 501.350.11
- D=35mm
- LT=30mm
- S=M12x1 Z2+V2

Cylinder head drill D=36, right D=36mm L=30mm
- LT=30mm
- S=M12x1 Z2+V2
- RH (right-hand rotation) HW

Cylinder head drill D=38, right L=30mm · 501.380.11
- D=38mm
- LT=30mm
- S=M12x1 Z2+V2

Counterbore D=40, right-hand L=30mm · 501.400.11
- D=40mm
- LT=30mm
- S=M12x1 Z2+V2

Cylinder head drill D=45, right L=30mm · 501.450.11
- D=45mm
- LT=30mm
- S=M12x1 Z2+V2

Cylinder head drill D=50, right L=30mm · 501.500.11
- D=50mm
- LT=30mm
- S=M12x1 Z2+V2

Cylinder head drill D=55, right-hand L=30mm · 501.550.11
- D=55mm
- LT=30mm
- S=M12x1 Z2+V2

Cylinder head drill D=60, right-hand L=30mm · 501.600.11
- D=60mm
- LT=30mm
- S=M12x1 Z2+V2
Cylinder head drills with threaded shank
These cylinder head drills do not have a smooth shank, but a short body with internal thread M12x1. You screw them directly onto the spindle or the drill holder of a drilling machine or multi-spindle drill head with threaded mounting. This provides a firm, play-free connection, so hinge holes and cup holes are always in the same position and depth in series work. The range runs from 20 to 60 mm, with carbide cutting edges, two pre-cutters and a chip breaker.
For machines with a fixed holder
A drill with internal thread does not fit in a standard drill chuck: it belongs on a machine whose spindle or drill holder has an external thread M12x1. These are typically drilling machines and drill heads for series work, where hundreds of holes in a row must be exactly the same. Because the drill is fixed on the thread, it cannot slip or run off-center. Before ordering, check the thread size on the machine or on the drill currently mounted on it.
Rotational direction and mounting
With multi-spindle heads, the spindles rotate alternately left and right, and a drill is sharpened for one rotational direction only. Check which direction your spindle has — that is stated on the current drill and in the machine documentation. Tighten the drill by hand all the way to the stop and check the throw: a drill that is not fully screwed in will not drill to the correct depth.