Cylinder Head Drills – Flat Shank
For the precise drilling of flat-bottom holes on industrial machines, these cylindrical head drills with flat shank offer a reliable solution. The flat shank ensures a secure, slip-free grip in the drill chuck, essential when drilling with the high torque of machine drilling.
The range of cylindrical head drills includes a wide choice of diameters, available in right-hand and usually also left-hand versions. When choosing, always pay attention to the rotation direction of the machine spindle: a left-hand drill belongs on a left-hand rotating spindle. When a high-quality finish is required, it is best to choose a version with pre-cutters and chip breakers.
What diameter should the borehole be?
Filters
Availability
Connection type
D (diameter) in mm
Cutting material
L (total length) in mm
S (shank) in mm
L1 (length 1) in mm
Line
Rotation direction
Chip breaker

Cylindrical head drill D=24, right-hand S=10mm L=57,5mm L1=26mm
- D=24mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=24, left L=57,5mm
- D=24mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=25, right S=10mm L=57,5mm L1=26mm · 317.250.11
- D=25mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=25, left L=57,5mm L1=26mm · 317.250.12
- D=25mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=25, right S=10mm L=57,5mm L1=26mm · 317.250.41
- D=25mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=25, left L=57,5mm L1=26mm · 317.250.42
- D=25mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=26, right-hand S=10mm L=57,5mm L1=26mm · 317.260.11
- D=26mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=26, left L=57,5mm · 317.260.12
- D=26mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=26, right-hand S=10mm L=57,5mm L1=26mm · 317.260.41
- D=26mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=26, left L=57,5mm · 317.260.42
- D=26mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head cutter D=28, right-hand S=10mm L=57,5mm L1=26mm
- D=28mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=28, left-hand D=28mm S=10mm
- LT=57,5mm
- S=10x26mm Z2+V2
- LH (left-hand rotation) HW

Cylinder head drill D=30, right-hand S=10mm L=57,5mm L1=26mm
- D=30mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=30, left-hand L=57,5mm L1=26mm
- D=30mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder Head Drill D=32, right L=57,5mm L1=26mm
- D=32mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=32, left L=57,5mm
- D=32mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=34, right-hand S=10mm L=57,5mm L1=26mm
- D=34mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=34, left L=57,5mm
- D=34mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=35, right hand S=10mm L=57,5mm L1=26mm · 317.350.11
- D=35mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=35, right hand S=10mm L=57,5mm L1=26mm · 317.350.11C
- D=35mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=35, left L=57,5mm L1=26mm · 317.350.12
- D=35mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=35, left L=57,5mm L1=26mm · 317.350.12C
- D=35mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=35, right hand S=10mm L=57,5mm L1=26mm · 317.350.41
- D=35mm
- LT=57,5mm
- S=10x26mm Z2+V2

Cylinder head drill D=35, left L=57,5mm L1=26mm · 317.350.42
- D=35mm
- LT=57,5mm
- S=10x26mm Z2+V2
24 of 139 products shown
Industrial dowel drills with flat shank
These dowel drills have a shank with a flat: a flattened section on which the drill chuck clamping screw grips. This prevents the drill from rotating or slipping down, even at the high feed rates of a CNC drilling machine or a multi-spindle head in production.
Why a flat shank?
In series production, a drill is moved into and out of the material dozens of times per minute. A smooth shank can slip in the holder under that load, causing the drilling depth to drift and the hole to become too deep or too shallow. The flat shank provides a mechanical grip for the clamping screw, so the drill stays exactly in place — hole after hole, hour after hour.
Check protrusion and depth
When mounting, protrusion matters: slide the drill fully into the holder up to the stop and tighten the clamping screw on the flat shank. Then check the drilling depth on scrap material, because a drill that protrudes one millimeter further drills one millimeter deeper — with hinge holes, that is exactly the difference between a good hole and breakthrough at the front face.