Cutting tools: choice of 20,000 articles
Select language

Collets

The connection between machine and cutter depends on the collet. It determines the tool's concentricity and thus the quality of every cut. This range includes precision collets in the common ER systems — ER20, ER25 and ER32 — as well as versions according to DIN 6388 and collets for specific collet chucks.

A collet is a wear part, even if it seems indestructible. Fatigued slots clamp unevenly, causing the cutter no longer to run centred and creating vibrations. You will see this in the milling pattern and the tool life. Clean the collet and taper with every tool change, never clamp on too short a shank, and replace the collet when there is visible wear or vibration. Always choose the size exactly according to the shank diameter: a collet can clamp only to a limited extent below its nominal size.

Read more about this category
Find what you need faster
Step 1 of 2
Precision collet ER11 · 184.050.11

Precision collet ER11 · 184.050.11

  • ER11 L=18 mm
  • D³=5 mm D=11,5 mm
€15.60
€18.88 VAT incl.
Code:184.050.11
In stock
Precision collet chuck ER16 · 184.050.16

Precision collet chuck ER16 · 184.050.16

  • ER16 L=27,5 mm
  • D³=5 mm D=17 mm
€11.00
€13.31 VAT incl.
Code:184.050.16
In stock
Precision collet ER20 · 184.050.20

Precision collet ER20 · 184.050.20

  • ER20 L=31 mm
  • D³=5 mm D=21 mm
€12.60
€15.25 VAT incl.
Code:184.050.20
In stock
Precision collet ER25 · 184.050.25

Precision collet ER25 · 184.050.25

  • ER25 L=35 mm
  • D³=5 mm D=26 mm
€12.60
€15.25 VAT incl.
Code:184.050.25
In stock
Precision collet ER40 · 184.052.00

Precision collet ER40 · 184.052.00

  • ER40 L=46 mm
  • D³=5 mm D=41 mm
€18.80
€22.75 VAT incl.
Code:184.052.00
In stock
Precision ER32 collet · 184.060.00

Precision ER32 collet · 184.060.00

  • ER32 L=40 mm
  • D³=6 mm D=33 mm
€12.10
€14.64 VAT incl.
Code:184.060.00
In stock
Precision collet ER32 (high precision) · 184.060.00H

Precision collet ER32 (high precision) · 184.060.00H

  • ER32 precision collet (0,005) L=40 mm
  • D³=6 mm D=33 mm
€31.40
€37.99 VAT incl.
Code:184.060.00H
In stock
Precision collet ER11 · 184.060.11

Precision collet ER11 · 184.060.11

  • ER11 L=18 mm
  • D³=6 mm D=11,5 mm
€15.60
€18.88 VAT incl.
Code:184.060.11
In stock
Precision collet chuck ER16 · 184.060.16

Precision collet chuck ER16 · 184.060.16

  • ER16 L=27,5 mm
  • D³=6 mm D=17 mm
€11.00
€13.31 VAT incl.
Code:184.060.16
In stock
Precision collet ER20 · 184.060.20

Precision collet ER20 · 184.060.20

  • ER20 L=31 mm
  • D³=6 mm D=21 mm
€12.60
€15.25 VAT incl.
Code:184.060.20
In stock
Precision collet ER25 · 184.060.25

Precision collet ER25 · 184.060.25

  • ER25 L=35 mm
  • D³=6 mm D=26 mm
€12.60
€15.25 VAT incl.
Code:184.060.25
In stock
Precision collet ER40 · 184.062.00

Precision collet ER40 · 184.062.00

  • ER40 L=46 mm
  • D³=6 mm D=41 mm
€18.80
€22.75 VAT incl.
Code:184.062.00
In stock
Precision collet ER40 (high precision) · 184.062.00H

Precision collet ER40 (high precision) · 184.062.00H

  • ER40 precision collet (0,005) L=46 mm
  • D³=6 mm D=41 mm
€37.60
€45.50 VAT incl.
Code:184.062.00H
In stock
Precision collet ER40 · 184.064.00

Precision collet ER40 · 184.064.00

  • ER40 L=46 mm
  • D³=6,35 mm D=41 mm
€30.40
€36.78 VAT incl.
Code:184.064.00
In stock
Precision collet ER20 · 184.064.20

Precision collet ER20 · 184.064.20

  • ER20 L=31 mm
  • D³=6,35 mm D=21 mm
€12.60
€15.25 VAT incl.
Code:184.064.20
In stock
Precision collet ER25 · 184.064.25

Precision collet ER25 · 184.064.25

  • ER25 L=35 mm
  • D³=6,35 mm D=26 mm
€25.50
€30.86 VAT incl.
Code:184.064.25
In stock
Precision ER32 collet · 184.065.00

Precision ER32 collet · 184.065.00

  • ER32 L=40 mm
  • D³=6,35 mm D=33 mm
€12.10
€14.64 VAT incl.
Code:184.065.00
In stock
Precision ER32 collet · 184.070.00

Precision ER32 collet · 184.070.00

  • ER32 L=40 mm
  • D³=7 mm D=33 mm
€12.10
€14.64 VAT incl.
Code:184.070.00
In stock
Precision collet chuck ER16 · 184.070.16

Precision collet chuck ER16 · 184.070.16

  • ER16 L=27,5 mm
  • D³=7 mm D=17 mm
€14.00
€16.94 VAT incl.
Code:184.070.16
In stock
Precision collet ER20 · 184.070.20

Precision collet ER20 · 184.070.20

  • ER20 L=31 mm
  • D³=7 mm D=21 mm
€12.60
€15.25 VAT incl.
Code:184.070.20
In stock
Precision collet ER40 · 184.072.00

Precision collet ER40 · 184.072.00

  • ER40 L=46 mm
  • D³=7 mm D=41 mm
€18.80
€22.75 VAT incl.
Code:184.072.00
In stock
Precision ER32 collet · 184.080.00

Precision ER32 collet · 184.080.00

  • ER32 L=40 mm
  • D³=8 mm D=33 mm
€12.10
€14.64 VAT incl.
Code:184.080.00
In stock
Precision collet ER32 (high precision) · 184.080.00H

Precision collet ER32 (high precision) · 184.080.00H

  • ER32 precision collet (0,005) L=40 mm
  • D³=8 mm D=33 mm
€31.40
€37.99 VAT incl.
Code:184.080.00H
In stock
Precision collet chuck ER16 · 184.080.16

Precision collet chuck ER16 · 184.080.16

  • ER16 L=27,5 mm
  • D³=8 mm D=17 mm
€14.00
€16.94 VAT incl.
Code:184.080.16
In stock

24 of 120 products shown

About this category

ER11 to ER40 collets and DIN 6388 for CNC

The collet clamps the shank of your cutter or drill in the holder and thus helps determine concentricity, vibration and tool life. Here you will find precision collets from CMT in the ER11, ER16, ER20, ER25, ER32 and ER40 systems and according to DIN 6388 (EOC16 and EOC25), for shanks from 1 to 25 mm, including inch sizes such as 1/4, 3/8, 1/2 and 3/4 inch.

First the right system, then the right size

A collet only fits into a holder of the same system: an ER32 collet belongs in an ER32 holder, an EOC25 collet in a DIN 6388 holder. ER and DIN 6388 are not interchangeable. Then choose the size exactly according to the shank diameter. An ER collet can clamp slightly below its nominal size, but for routers the exact size gives the best concentricity and the highest clamping force. So a 6 mm shank belongs in a 6 mm collet, not in an 8 mm one.

Clean and clamp to a sufficient depth

Blow out the collet, the taper of the holder and the clamping nut at every tool change: resin buildup and chips cause runout immediately. Clamp the shank over at least two thirds of the collet length and always on the cylindrical part. With ER collets, first click the collet into the clamping nut and only then screw the nut onto the holder. Tighten with the appropriate hook spanner, preferably outside the machine. You will find clamping nuts and hook spanners under parts for CNC tool holders and CNC accessories.

What is the clamping range of an ER collet?
An ER collet clamps over a limited range below its nominal size, typically 1 mm and with ER11 0.5 mm. For routers and drills, however, it is best to choose the collet that exactly matches the shank diameter: that gives the best concentricity and clamping force.
Do ER collets fit in a DIN 6388 holder?
No. ER and DIN 6388 (EOC) have a different taper and a different clamping nut and are therefore not interchangeable. An EOC25 collet belongs in an EOC25 holder, an ER32 collet in an ER32 holder. Always check the system of your holder.
Can I clamp a cutter with a 6 mm shank in an 8 mm collet?
No. The collet then clamps insufficiently and the cutter can slip out of the holder. Use the collet that exactly matches the shank diameter. For inch shanks there are separate sizes, such as 6.35 mm (1/4 inch) and 12.7 mm (1/2 inch).
How deep should I clamp the shank?
Over at least two thirds of the collet length, and always on the cylindrical part of the shank. Clamping too shallow increases runout and the load on the shank, and is a common cause of broken cutters.
When should I replace a collet?
When the slots are worn or damaged, if there is rust or scratches on the taper, or when vibration marks disappear as soon as you use a new collet. In production work, a collet is a consumable: replace it in time, and also the clamping nut if it shows wear.
Compiled by Garnotec’s specialist team — specialist in professional cutting tools for more than 30 years. Unsure which version suits your machine or material? Contact our team · View the full range
Where can I buy ER32 collets and tool holders for my CNC router in Belgium?
At Garnotec you will find precision collets in the ER system, including ER32, as well as collets according to DIN 6388 and for specific collet holders. Make sure the collet matches the shank diameter and your machine mount exactly, because runout also determines the quality of the cut. Garnotec is a wholesale supplier of cutting tools in Meerhout with more than 30 years of expertise and a webshop with CNC accessories and machine accessories for professionals and private customers.

We use cookies to ensure the website functions properly. In addition, we place analytical cookies (Google Analytics, Microsoft Clarity) to analyse the use of the website. These are only placed after your consent. More information