CNC accessories
Some CNC accessories fall outside any standard classification, but in practice they make all the difference. Under CNC accessories you will find, among other things, the universal mounting aid for collet chucks, which makes changing collets safe and ergonomic.
The mounting aid is often underestimated: anyone tightening collets loose on the workbench risks angled nuts, damaged tapers and loose tools. With a fixed mounting support, you clamp the holder securely in place and immediately feel whether the collet clicks correctly into the nut before you fit the cutter. A small investment that pays for itself in a longer service life for holders and collets.
Filters
B (bore) special
D (diameter) in mm
Type

Universal mounting aid for collet chucks D=63mm
- Connection type: HSK-63F
- Rotation direction: Right-hand and left-hand rotation

Universal mounting aid for collet chucks D=50mm
- Connection type: ISO30
- Rotation direction: Right- and left-hand rotation


25-piece case for CNC machine
- Complete 25-piece set
- Cutters, drills, wrenches, knives
- Precision collets: ER32









Angle head for Kinetic Extrator · TW-1001
- S=14x18mm
- D=95 -100mm





CNC accessories: spanners and mounting aids for collet chucks
A collet chuck is only as accurate as the way you clamp it. Under CNC accessories you will find spanners for ER20, ER25, ER32 and ER40 collet nuts and for the Kinetic extraction system, angle heads with a 14 x 18 mm drive for nuts from Ø 28 to 100 mm, universal mounting aids for HSK-F63 and ISO 30 holders, and 23- and 25-piece cases for the CNC machine.
Clamping outside the machine
Tightening a collet nut while the holder is still in the spindle loads the spindle bearings and the tool holder — exactly what you want to avoid. With the universal mounting aid, you secure an HSK-F63 or ISO 30 collet chuck outside the machine. A bearing ring clamps the holder in both directions of rotation, without damaging the taper or the HSK interface. This way you change the cutter and tighten the nut in a controlled manner, without force on the spindle.
The right spanner for every collet nut
A spanner engages in the slots of the collet nut and must match the nut type and nut diameter exactly. With the spanner for ER20, ER25, ER32 or ER40 you avoid slipping and damaged nuts. For the Kinetic extraction system, there are separate spanners for the larger diameters up to 100 mm. If you prefer to tighten with a torque wrench, use an angle head with 14 x 18 mm drive in the appropriate diameter range. Never use pliers or a hammer: this damages the nut and affects concentricity.