Cutting tools: choice of 20,000 articles
Select language

Xtreme Fast – quick-change system

Quickly switch between diameters and neatly enlarge existing holes: that is what the Xtreme Fast quick-change system is designed for. The quick-change holder with HEX 11 mount and PUSH&LOCK connection lets you lock and release a hole saw in one motion. In a set of three adapters, longer mounts are included that make it possible to attach 2 diameters at once to one connection. This makes it possible to enlarge an already drilled hole to a larger size — a task that is difficult to do cleanly with a standard pilot drill.

Also included in this category are extensions with hex shank and PUSH&LOCK connection from CMT and separate HSS pilot drills that fit the quick-change holders. 

A practical tip: always keep a spare pilot drill at hand; the pilot drill wears out faster than the saw itself and largely determines how smoothly the hole saw starts cutting.

Read more about this category
Adapter for all types of hole saws Ø16-30mm

Adapter for all types of hole saws Ø16-30mm

  • 3 pieces
  • XTREME FAST adapter
  • Suitable for Ø16-30mm
€9.95
€12.04 VAT incl.
Code:550-PA01
In stock
Adapter for all types of hole saws Ø32-150mm

Adapter for all types of hole saws Ø32-150mm

  • 3 pieces
  • XTREME FAST adapter
  • Suitable for Ø32-150mm
€11.79
€14.27 VAT incl.
Code:550-PA02
In stock
Adapter for all types of hole saws >= Ø152mm

Adapter for all types of hole saws >= Ø152mm

  • 3 pieces
  • XTREME FAST adapter
  • Suitable for >= Ø152mm
€14.71
€17.80 VAT incl.
Code:550-PA03
In stock
Adapter for holesaw series 552-5

Adapter for holesaw series 552-5

  • 3 pieces
  • XTREME FAST adapter
  • M14x2 thread
€11.06
€13.38 VAT incl.
Code:550-PA04
In stock
Set of 3 adapters to enlarge an existing hole

Set of 3 adapters to enlarge an existing hole

  • 3 pieces
  • XTREME FAST adapter
  • Suitable for Ø16-270mm
€14.23
€17.22 VAT incl.
Code:550-PA05
In stock
Starter kit (HSS drill bit + quick-change holder + adapters)

Starter kit (HSS drill bit + quick-change holder + adapters)

  • Interchangeable holder HEX8.5 11 32
€36.68
€44.38 VAT incl.
Code:550-PA06
In stock
Adapter for hole saw series 552-7

Adapter for hole saw series 552-7

  • 3 pieces
  • XTREME FAST adapter
  • Suitable for 552.7
Code:550-PA07
Carbide drill bit suitable for quick-change chuck(s)

Carbide drill bit suitable for quick-change chuck(s)

  • Suitable for: bricks, aerated concrete, soft tiles ...
€5.59
€6.76 VAT incl.
Code:550-PD01
In stock
HSS drill suitable for the quick-change holder(s) · 550-PD02

HSS drill suitable for the quick-change holder(s) · 550-PD02

  • Suitable for: wood, plywood, laminate, plasterboard, aluminium, copper, steel, plastic, cast iron ...
€5.98
€7.24 VAT incl.
Code:550-PD02
In stock
Quick-change holder with HSS drill, HEX 11 shank

Quick-change holder with HSS drill, HEX 11 shank

  • PUSH&LOCK adapter
  • HEX 11 connection
€21.97
€26.58 VAT incl.
Code:550-PH11
In stock
Quick-change holder with HSS drill, HEX 8,5 shank

Quick-change holder with HSS drill, HEX 8,5 shank

  • PUSH&LOCK adapter
  • HEX 8,5 connection
€21.97
€26.58 VAT incl.
Code:550-PH85
In stock
Quick-change holder with HSS drill bit, SDS mount

Quick-change holder with HSS drill bit, SDS mount

  • PUSH&LOCK adapter
  • SDS connection
€29.90
€36.18 VAT incl.
Code:550-PHSD
In stock
Extension with hex shank connection PUSH&LOCK S=HEX11 (7/16) L=150mm L1=120mm

Extension with hex shank connection PUSH&LOCK S=HEX11 (7/16) L=150mm L1=120mm

  • Push & Lock
€20.70
€25.05 VAT incl.
Code:55EX-1106
In stock
Extension with hex shank connection PUSH&LOCK S=HEX11 (7/16) L=300mm L1=270mm

Extension with hex shank connection PUSH&LOCK S=HEX11 (7/16) L=300mm L1=270mm

  • Push & Lock
€23.80
€28.80 VAT incl.
Code:55EX-1112
In stock
Extension with hex shank connection PUSH&LOCK S=HEX11 (7/16) L=450mm L1=420mm

Extension with hex shank connection PUSH&LOCK S=HEX11 (7/16) L=450mm L1=420mm

  • Push & Lock
€30.70
€37.15 VAT incl.
Code:55EX-1118
In stock
Extension with hex shank connection PUSH&LOCK S=HEX8.5 (11/32) L=150mm L1=120mm

Extension with hex shank connection PUSH&LOCK S=HEX8.5 (11/32) L=150mm L1=120mm

  • Push & Lock
€20.70
€25.05 VAT incl.
Code:55EX-8506
In stock
Extension with hex shank connection PUSH&LOCK S=HEX8.5 (11/32) L=300mm L1=270mm

Extension with hex shank connection PUSH&LOCK S=HEX8.5 (11/32) L=300mm L1=270mm

  • Push & Lock
€23.80
€28.80 VAT incl.
Code:55EX-8512
In stock
Extension with hex shank connection PUSH&LOCK S=HEX8.5 (11/32) L=450mm L1=420mm

Extension with hex shank connection PUSH&LOCK S=HEX8.5 (11/32) L=450mm L1=420mm

  • Push & Lock
€30.70
€37.15 VAT incl.
Code:55EX-8518
In stock
About this category

Xtreme Fast: quick-change system for hole saws from CMT

Xtreme Fast is CMT’s quick-change system with PUSH&LOCK connection: the hole saw is locked onto the quick-change holder in one movement and released again just as easily. The holders are available with an HSS pilot drill and a HEX 8.5, HEX 11 or SDS shank. You will also find adapters per diameter range, adapters for the diamond hole saws 552-5 and 552-7, separate HSS and HW pilot drills, extension pieces with hex shank, a set of three adapters for enlarging holes and a starter pack.

One adapter per diameter range

The hole saw is mounted on the holder via an adapter that is fitted to its screw connection. There are three ranges: Ø16–30 mm, Ø32–150 mm and from Ø152 mm onwards. For the carbide hole saws 550X and the bi-metal hole saws 551X, which together cover 16 to 270 mm, your diameter package therefore determines which adapters you need. If you are starting with the system, the starter pack combines an HSS pilot drill, a quick-change holder and adapters in one package.

Choose holder and extension

Choose the holder according to your machine: HEX 8.5 or HEX 11 for the chuck of a drill, SDS for a rotary hammer, which you should then use in drilling mode only. The extension pieces with hex shank and PUSH&LOCK connection are available in several lengths, up to 450 mm, for penetrations that are far away from the machine. Also keep a separate HSS or HW pilot drill in reserve: the pilot drill wears faster than the hole saw and determines how smoothly it starts cutting.

Which parts do you need at minimum?
A quick-change holder with pilot drill in the right holder for your machine, and for each hole saw the adapter of the correct diameter range: Ø16–30 mm, Ø32–150 mm or from Ø152 mm onwards. The starter pack contains an HSS pilot drill, a quick-change holder and adapters so you can get started right away.
Can you also use existing hole saws with it?
The adapters are intended for hole saws with screw connection in the diameter ranges mentioned. For the diamond hole saws of the 552-5 and 552-7 series, separate adapters are available. When using hole saws from another brand, always check the screw connection first.
HEX 8.5, HEX 11 or SDS: which holder do you choose?
HEX 8.5 and HEX 11 are hex shanks for the chuck of a drill; HEX 8.5 also fits in a smaller chuck. If you work with a rotary hammer, choose the holder with SDS mount and set the machine to drilling mode, without hammer action.
What is the set of three adapters for?
To enlarge an existing hole. With the set, you use a smaller hole saw as a guide in the existing hole, while the larger hole saw cuts; this prevents it from wandering. Always clamp the workpiece firmly.
Compiled by Garnotec’s specialist team — specialist in professional cutting tools for more than 30 years. Unsure which version suits your machine or material? Contact our team · View the full range

We use cookies to ensure the website functions properly. In addition, we place analytical cookies (Google Analytics, Microsoft Clarity) to analyse the use of the website. These are only placed after your consent. More information