Traditional holder
Not every workshop needs a quick-change system. The traditional holder remains the simplest and most robust solution: secure the holder, screw on the hole saw and drill. No moving lock, so nothing that can wear out or get clogged in dusty work.
The range consists of hole saw holders in two size ranges — one for diameters below 32 mm and one for diameters from 32 mm — supplemented by a hole saw adapter to make existing hole saws fit. When choosing, pay particular attention to the diameter of the hole saws you use most often: the two holder types each have their own screw connection, and if you regularly cover the full range, it is best to keep both versions in the toolbox.
Filters
Type

Hole saw adapter
- Easy hole enlargement
- for every (quick) change holder
- small and large diameters

Hole saw holder for diameters < 32mm
- Hole saw diameters < 32mm

Hole saw holder for diameters ≥ 32mm
- Hole diameters >= 32mm
Traditional hole saw holder: arbors with screw connection
The traditional hole saw holder is the simplest way to drive a hole saw: holder in the drill chuck, hole saw on the thread and drill. There is no quick-change mechanism, so there is nothing that can get dirty or wear out during dusty work. The GRN Tools range consists of two hole saw holders — for diameters below 32 mm and from 32 mm — and a hole saw adapter.
Which holder fits which hole saw?
The two holders differ in screw connection. The holder for diameters below 32 mm is intended for hole saws with a 1/2" connection, the holder from 32 mm for hole saws with a 5/8" connection — exactly the division you find in the GRN ranges hard metal hole saws 550G and bi-metal hole saws 551G. If you use sizes on both sides of that boundary, you need both holders. The hole saw adapter completes the set so existing hole saws can be adapted to fit.
When do you choose a traditional holder?
A traditional holder is the logical choice when you usually work with one or a few fixed diameters, for example in series work in the workshop. In that case you rarely change saws, and a quick-change system offers little time savings. If you often switch diameter during one job, take a look at the S-Lock quick-change system from the same brand: there, an adapter stays on each hole saw and you change without screwing. You can simply keep using your existing hole saws.