Indexable inserts
Tools with an indexable insert system do not need regrinding: you turn or replace the inserts and can mill again with a sharp edge within minutes. This category indexable inserts for cutters and planer heads includes more than seven hundred versions. You will find HWM inserts in various lengths, such as 30 mm, packed per 2 or 10 pieces, including inserts according to the Leitz system.
Always choose indexable inserts exactly according to the system of your cutter head or planer head. The clamping geometry differs from system to system and an insert that only almost fits is unsafe. Always replace inserts as a complete set and make sure the clamping surfaces are clean: one new insert between worn inserts can throw the head out of balance. Packs of 10 pieces also lower the cost for those who change inserts regularly.
Filters
Availability
A (cutting angle)
K (thickness)
Cutting material
Brand
L (total length) in mm
L1 (length 1) in mm
R (radius) in mm
Z (number of teeth / cutting edges)
I (effective cutting length) in mm
Markings (connection)
R in degrees
Chip breaker
d (small diameter) in mm
D (diameter) in mm
Material to be machined
Packaging unit

HWM reversible knives 18mm (per 10 pcs.) · 790.180.00
- L=18x12x1,5 35°
- Z2 HC20

HWM reversible knives 18mm (per 10 pcs.) · 790.180.06
- L=18x12x1,5 35°
- Z2 KCR08 S1920
- 10 pieces

HWM reversible knives (per 2 pcs.) L=18mm K=1,5mm
- L=18x12x1,5 35°
- Z2 KCR08 S1920
- 2 pieces

Grooving tooth HWM (per 10 pcs) L=18mm K=1,95mm H=18mm d=10,4mm
- L=18x18x1,95
- Z4 KCR08
- 10 pieces

Grooving tooth HWM (per 2 pcs.) K=1,95mm
- L=18x18x1,95
- Z4 KCR08 S1920
- 2 pieces

Straight blade with 90° notch (per 1 pc.) L=50mm K=1,5mm H=12mm
- L=50x12x1,5 35°
- Z1 HC05 F1730
- 1 piece

Grooving tooth HWM (per 10 pcs) L=18mm K=2,45mm H=18mm d=10,4mm
- L=18x18x2,45
- Z4 KCR08
- 10 pieces

Grooving tooth HWM (per 2 pcs.) K=2,45mm
- L=18x18x2,45
- Z4 KCR08 S1920
- 2 pieces

Grooving tooth HWM (per 10 pcs) L=18mm K=2,95mm H=18mm d=10,4mm
- L=18x18x2,95
- Z4 KCR08


Grooving tooth HWM (per 10 pcs) L=18mm K=3,7mm H=18mm d=10,4mm
- L=18x18x3,7
- Z4 KCR08
- 10 pieces


Grooving tooth HWM (per 10 pcs) L=18mm K=4mm H=18mm d=10,4mm
- L=18x18x4
- Z4 KCR08
- 10 pieces


HWM Scoring bit for pot boring bit (per 10 pcs.) L=18mm K=3,5mm
- L=18x6x3,5
- Z4 MG18
- 10 pieces

HWM Pre-cutter for Forstner bit (per 2 pcs.) L=18mm K=3,5mm
- L=18x6x3,5
- Z4 MG18
- 2 pieces


HWM reversible knives (per 2 pcs.) L=19mm K=1,5mm
- L=19x12x1,5 35°
- Z2 KCR08 S1920
- 2 pieces

HWM reversible knives (per 10 pcs.) L=19mm H=19mm d=4mm
- L=19x19x2 35°
- Z4 KCR08 S1920
- 10 pieces

HWM replaceable knives (2 pcs.) L=19,5mm K=1,5mm H=12mm · 790.195.00PP
- L=19,5x12x1,5 35°
- Z4 KCR08 S1920
- 2 pieces

HWM reversible knives (per 10 pcs.) L=19,5mm H=12mm d=4,1mm · 790.195.02
- L=19,5x12x1,5 35°
- Z4 MG06 S2020
- 10 pieces

HWM reversible knives (per 10 pcs.) L=19,5mm H=12mm d=4,1mm · 790.195.03
- L=19,5x12x1,5 35°
- Z4 SMG02 U2300
- 10 pieces

HWM reversible knives (per 10 pcs.) L=19,5mm H=12mm d=4,1mm · 790.195.04
- L=19,5x12x1,5 35°
- Z4 UMG04 N2550

HWM replaceable knives (2 pcs.) L=19,5mm K=1,5mm H=12mm · 790.195.04PP
- L=19,5x12x1,5 35°
- Z4 UMG04 N2550
- 2 pieces
24 of 644 products shown