Indexable inserts
Tools with an indexable insert system do not need regrinding: you turn or replace the inserts and can mill again with a sharp edge within minutes. This category indexable inserts for cutters and planer heads includes more than seven hundred versions. You will find HWM inserts in various lengths, such as 30 mm, packed per 2 or 10 pieces, including inserts according to the Leitz system.
Always choose indexable inserts exactly according to the system of your cutter head or planer head. The clamping geometry differs from system to system and an insert that only almost fits is unsafe. Always replace inserts as a complete set and make sure the clamping surfaces are clean: one new insert between worn inserts can throw the head out of balance. Packs of 10 pieces also lower the cost for those who change inserts regularly.
Filters
Availability
A (cutting angle)
K (thickness)
Cutting material
Brand
L (total length) in mm
L1 (length 1) in mm
R (radius) in mm
Z (number of teeth / cutting edges)
I (effective cutting length) in mm
Markings (connection)
R in degrees
Chip breaker
d (small diameter) in mm
D (diameter) in mm
Material to be machined
Packaging unit

HWM replaceable knives (2 pcs.) L=14mm K=2mm H=14mm · 790.140.20PP
- L=14x14x2 R=0,5 30°
- Z4 MG18
- 2 pieces

HWM spare blade (per 10 pcs.) L=14mm K=2mm Z4
- L=14x14x2 45°
- Z4 MG18

HWM reversible knives (per 10 pcs.) L=14mm H=14mm d=5,5mm
- L=14x14x2 30°
- Z4 KCR05
- 10 pieces

Triangular glue knife L=60mm K=1,5mm H=12mm
- L=60x12x1,5 35°
- Z2 HC05 F1730
- 1 piece

Triangular glue knife L=80mm K=2,2mm H=13mm
- L=80x13x2,2 35°
- Z2 HC05 F1730
- 1 piece

HWM reversible knives (per 10 pcs.) L=14,3mm H=14,3mm d=6,3mm
- L=14,3x14,3x2,5 35°
- Z4 MG06 S2020
- 10 pieces

HWM reversible knives (per 10 pcs) L=14,6mm K=1,5mm
- L=14,6x12x1,5 35°
- Z2 KCR08 S1920
- 10 pieces

HWM replaceable knives (per 2 pcs.) L=14,6mm K=1,5mm
- L=14,6x12x1,5 35°
- Z2 KCR08 S1920
- 2 pieces

HWM interchangeable knives 14mm (per 10 pcs.) d=4mm
- L=14,6x9x1,5 35°
- Z2 HC05 F1730
- 10 pieces

HWM reversible knives (per 10 pcs.) L=14,6mm H=14,6mm d=6,4mm · 790.146.18
- L=14,6x14,6x2,5 30°
- Z4 MG06 S2020

HWM interchangeable knives 14mm (per 10 pcs.) d=4,1mm
- L=14,6x9x1,5 35°
- Z2 KCR08 S1920
- 10 pieces

HWM reversible knives 14mm (per 2 pcs.) L=14,6mm K=1,5mm
- L=14,6x9x1,5 35°
- Z2 KCR08 S1920
- 2 pieces

HWM reversible knives Leitz system (per 10 pcs.) L=14,7mm
- L=14,7x8x1,5 40°
- Z2 KCR05
- 10 pieces

HWM reversible knives (per 10 pcs.) L=15mm H=12mm d=4,1mm · 790.150.00
- L=15x12x1,5 35°
- Z2 HC05 F1730
- 10 pieces

HWM reversible knives (per 10 pcs.) L=15mm H=12mm d=4,1mm · 790.150.02
- L=15x12x1,5 35°
- Z2 MG06 S2020

Carbide insert knives 15mm (per 10 pcs.) · 790.150.03
- L=15x12x1,5 35°
- Z2 SMG02 U2300
- 10 pieces

Carbide insert knives 15mm (per 10 pcs.) · 790.150.04
- L=15x12x1,5 35°
- Z2 KCR02+ 2240
- 10 pieces

HWM reversible knives 15mm (per 2 pcs.) · 790.150.04PP
- L=15x12x1,5 35°
- Z2 KCR02+ 2240
- 2 pieces

Carbide insert knives 15mm (per 10 pcs.) · 790.150.06
- L=15x12x1,5 35°
- Z2 KCR08 S1920
- 10 pieces

HWM reversible knives 15mm (per 2 pcs.) · 790.150.06PP
- L=15x12x1,5 35°
- Z2 KCR08 S1920
- 2 pieces

HWM reversible knives (per 10 pcs.) L=15mm H=15mm d=6,4mm · 790.150.18
- L=15x15x2,5 30°
- Z4 MG06 S2020
- 10 pieces

HWM reversible knives (per 10 pcs.) L=15mm H=15mm d=6,4mm · 790.150.24
- L=15x15x2,5 37°
- Z4 KRC08
- 10 pieces

Special knives (per 10 pcs.) L=15mm K=2,5mm H=15mm A=30°
- L=15x15x2,5 R=50
- 30° Z4 MG18
- 10 pieces

Special knives (per 10 pcs.) L=15mm K=2,5mm H=15mm A=37°
- L=15x15x2,5 37° R=95
- Z4 MG18
- 10 pieces
24 of 644 products shown