Indexable inserts
Tools with an indexable insert system do not need regrinding: you turn or replace the inserts and can mill again with a sharp edge within minutes. This category indexable inserts for cutters and planer heads includes more than seven hundred versions. You will find HWM inserts in various lengths, such as 30 mm, packed per 2 or 10 pieces, including inserts according to the Leitz system.
Always choose indexable inserts exactly according to the system of your cutter head or planer head. The clamping geometry differs from system to system and an insert that only almost fits is unsafe. Always replace inserts as a complete set and make sure the clamping surfaces are clean: one new insert between worn inserts can throw the head out of balance. Packs of 10 pieces also lower the cost for those who change inserts regularly.
Filters
Availability
A (cutting angle)
K (thickness)
Cutting material
Brand
L (total length) in mm
L1 (length 1) in mm
R (radius) in mm
Z (number of teeth / cutting edges)
I (effective cutting length) in mm
Markings (connection)
R in degrees
Chip breaker
d (small diameter) in mm
D (diameter) in mm
Material to be machined
Packaging unit

HWM reversible knives (per 10 pcs.) L=30mm H=12mm d=4,1mm · S790.306.112
- L=30x12x1,5 35°
- Z2 KCR08 S1920
- 10 pieces

HWM interchangeable knives Oertli system"(per 10 pcs.)" L=32mm H=8mm Z2
- L=32x8x1,5 40°
- Z2 MG18
- 10 pieces

HWM reversible knives (per 10 pcs.) L=39,5mm H=12mm d=4,1mm · S790.395.04
- L=39,5x12x1,5 35°
- Z4 KCR02+ 2240
- 10 pieces

HWM reversible knives (per 10 pcs.) L=39,5mm H=9mm d=4,1mm · S790.399.09
- L=39,5x9x1,5 35°
- Z4 KCR08 S1920
- 10 pieces

HWM reversible knives (per 10 pcs.) L=40mm H=21mm R=12mm d=4,2mm
- L=40x21x2,5 R12
- Z2 MG18
- 10 pieces

HWM reversible knives (per 10 pcs.) L=40mm H=21mm R=13mm d=4,2mm
- L=40x21x2,5 R13
- Z2 MG18
- 10 pieces

HWM reversible knives (per 10 pcs.) L=40mm H=12mm d=4,1mm · S790.400.35
- L=40x12x1,5 35°
- Z2 KCR08 S1920
- 10 pieces


HWM interchangeable knives Oertli system"(per 10 pcs.)" L=40mm H=8mm Z2
- L=40x8x1,5 40°
- Z2 MG18

HWM reversible knives (per 10 pcs.) L=45mm H=12mm d=4,1mm
- L=45x12x1,5 45°
- Z4 MG18
- 10 pieces

HWM reversible knives (per 10 pcs.) L=49,5mm H=8mm d=4,1mm
- L=49,5x8x1,5 35°
- Z4 KCR08 S1920
- 10 pieces

HWM reversible knives (per 10 pcs.) L=49,5mm H=9mm d=4,1mm · S790.499.09
- L=49,5x9x1,5 35°
- Z4 KCR08 S1920
- 10 pieces

HWM reversible knives (per 10 pcs.) L=49,5mm H=10mm d=4,1mm
- L=49,5x10x1,5 35°
- Z4 KCR08 S1920

HWM reversible knives (per 10 pcs.) L=49,5mm H=11mm d=4,1mm
- L=49,5x11x1,5 35°
- Z4 KCR08 S1920
- 10 pieces

HWM reversible knives (per 10 pcs.) L=50mm H=12mm d=4,1mm · S790.503.12
- L=50x12x1,7 35°
- Z4 KCR02+ 2240

HWM reversible knives (per 10 pcs.) L=50mm H=12mm d=4,1mm · S790.506.112
- L=50x12x1,5 35°
- Z2 KCR08 S1920

HWM reversible knives (per 10 pcs.) L=50mm H=12mm d=4,1mm · S790.506.12
- L=50x12x1,7 35°
- Z4 KCR08 S1920
- 10 pieces

HWM reversible knives (per 10 pcs.) L=59,5mm H=12mm d=4,1mm
- L=59,5x12x1,5 35°
- Z4 KCR08 S1920
- 10 pieces

HWM interchangeable knives Oertli system"(per 10 pcs.)" L=60mm H=8mm Z2
- L=60x8x1,5 40°
- Z2 MG18
- 10 pieces

HWM interchangeable knives Oertli system"(per 10 pcs.)" L=80mm H=8mm Z2
- L=80x8x1,5 40°
- Z2 MG18
- 10 pieces
20 of 644 products shown