Xtreme Fast – quick-change system
Quickly switch between diameters and neatly enlarge existing holes: that is what the Xtreme Fast quick-change system is designed for. The quick-change holder with HEX 11 mount and PUSH&LOCK connection lets you lock and release a hole saw in one motion. In a set of three adapters, longer mounts are included that make it possible to attach 2 diameters at once to one connection. This makes it possible to enlarge an already drilled hole to a larger size — a task that is difficult to do cleanly with a standard pilot drill.
Also included in this category are extensions with hex shank and PUSH&LOCK connection from CMT and separate HSS pilot drills that fit the quick-change holders.
A practical tip: always keep a spare pilot drill at hand; the pilot drill wears out faster than the saw itself and largely determines how smoothly the hole saw starts cutting.
Filters
Availability
B (bore) special
Cutting material
Type
L (total length) in mm
L1 (length 1) in mm
Rotation direction
S (shank) special
Material to be machined

Adapter for all types of hole saws Ø16-30mm
- 3 pieces
- XTREME FAST adapter
- Suitable for Ø16-30mm

Adapter for all types of hole saws Ø32-150mm
- 3 pieces
- XTREME FAST adapter
- Suitable for Ø32-150mm

Adapter for all types of hole saws >= Ø152mm
- 3 pieces
- XTREME FAST adapter
- Suitable for >= Ø152mm

Adapter for holesaw series 552-5
- 3 pieces
- XTREME FAST adapter
- M14x2 thread

Set of 3 adapters to enlarge an existing hole
- 3 pieces
- XTREME FAST adapter
- Suitable for Ø16-270mm

Starter kit (HSS drill bit + quick-change holder + adapters)
- Interchangeable holder HEX8.5 11 32


Carbide drill bit suitable for quick-change chuck(s)
- Suitable for: bricks, aerated concrete, soft tiles ...

HSS drill suitable for the quick-change holder(s) · 550-PD02
- Suitable for: wood, plywood, laminate, plasterboard, aluminium, copper, steel, plastic, cast iron ...

Quick-change holder with HSS drill, HEX 11 shank
- PUSH&LOCK adapter
- HEX 11 connection

Quick-change holder with HSS drill, HEX 8,5 shank
- PUSH&LOCK adapter
- HEX 8,5 connection

Quick-change holder with HSS drill bit, SDS mount
- PUSH&LOCK adapter
- SDS connection

Extension with hex shank connection PUSH&LOCK S=HEX11 (7/16) L=150mm L1=120mm
- Push & Lock

Extension with hex shank connection PUSH&LOCK S=HEX11 (7/16) L=300mm L1=270mm
- Push & Lock

Extension with hex shank connection PUSH&LOCK S=HEX11 (7/16) L=450mm L1=420mm
- Push & Lock

Extension with hex shank connection PUSH&LOCK S=HEX8.5 (11/32) L=150mm L1=120mm
- Push & Lock

Extension with hex shank connection PUSH&LOCK S=HEX8.5 (11/32) L=300mm L1=270mm
- Push & Lock

Extension with hex shank connection PUSH&LOCK S=HEX8.5 (11/32) L=450mm L1=420mm
- Push & Lock
Xtreme Fast: quick-change system for hole saws from CMT
Xtreme Fast is CMT’s quick-change system with PUSH&LOCK connection: the hole saw is locked onto the quick-change holder in one movement and released again just as easily. The holders are available with an HSS pilot drill and a HEX 8.5, HEX 11 or SDS shank. You will also find adapters per diameter range, adapters for the diamond hole saws 552-5 and 552-7, separate HSS and HW pilot drills, extension pieces with hex shank, a set of three adapters for enlarging holes and a starter pack.
One adapter per diameter range
The hole saw is mounted on the holder via an adapter that is fitted to its screw connection. There are three ranges: Ø16–30 mm, Ø32–150 mm and from Ø152 mm onwards. For the carbide hole saws 550X and the bi-metal hole saws 551X, which together cover 16 to 270 mm, your diameter package therefore determines which adapters you need. If you are starting with the system, the starter pack combines an HSS pilot drill, a quick-change holder and adapters in one package.
Choose holder and extension
Choose the holder according to your machine: HEX 8.5 or HEX 11 for the chuck of a drill, SDS for a rotary hammer, which you should then use in drilling mode only. The extension pieces with hex shank and PUSH&LOCK connection are available in several lengths, up to 450 mm, for penetrations that are far away from the machine. Also keep a separate HSS or HW pilot drill in reserve: the pilot drill wears faster than the hole saw and determines how smoothly it starts cutting.