Fish-mouth drills – cylindrical shank
The fish-mouth drill with cylindrical shank is the most common version of this slot mortising tool. The smooth shank is clamped in a drill chuck or collet and therefore fits a wide range of mortising and slot mortising machines. The drill combines axial drilling with lateral milling, so that you can work a row of holes into a neat slot mortise in one motion.
Almost the entire range is suitable for both left-hand and right-hand use, in addition to pure right-hand models. This is useful when your machine rotates in both directions or when you want to adapt the milling direction to the wood grain. Clamp the shank sufficiently deep and check the runout: a fish-mouth drill that wobbles will produce a slot mortise that is wider than intended.
What diameter should the borehole be?
Filters
Availability
D (diameter) in mm
Cutting material
Brand
I (effective cutting length) in mm
L1 (length 1) in mm
S (shank) in mm
Z (number of teeth / cutting edges)
L (total length) in mm
Rotation direction

Bird beak drill, left and right D=6mm S=16mm L=100mm I=45mm
- I=45mm LT=100mm
- S=16x50mm Z2
- Right- and left-hand rotation HL

Fishtail drill bit, left and right D=7mm S=16mm L=100mm I=45mm
- I=45mm LT=100mm
- S=16x50mm Z2
- Right- and left-hand rotation HL

Bird beak drill, left and right D=8mm S=16mm L=100mm I=45mm
- I=45mm LT=100mm
- S=16x50mm Z2
- Right- and left-hand rotation HL

Bird beak drill, left and right D=9mm S=16mm L=100mm I=45mm
- I=45mm LT=100mm
- S=16x50mm Z2
- Right- and left-hand rotation HL

Bird beak drill, left and right D=10mm S=16mm L=110mm I=55mm
- I=55mm LT=110mm
- S=16x50mm Z2
- Right- and left-hand rotation HL

Bird beak drill, left and right D=12mm S=16mm L=110mm I=55mm
- I=55mm LT=110mm
- S=16x50mm Z2
- Right- and left-hand rotation HL

Bird beak drill, left and right D=13mm S=16mm L=110mm I=55mm
- I=55mm LT=110mm
- S=16x50mm Z2
- Right- and left-hand rotation HL

Bird beak drill, left and right D=14mm S=16mm L=110mm I=55mm
- I=55mm LT=110mm
- S=16x50mm Z2
- Right- and left-hand HL

Bird beak drill, left and right D=16mm S=16mm L=110mm I=55mm
- I=55mm LT=110mm
- S=16x50mm Z2
- Right- and left-hand rotation HL

Bird beak drill, left and right D=24mm S=16mm L=100mm I=50mm
- I=50mm LT=100mm
- S=16x50mm Z2
- Right- and left-hand rotation HW

Bird beak drill, left and right D=6mm S=13mm L=100mm I=45mm
- I=45mm LT=100mm
- S=13x50mm Z4
- Right- and left-hand rotation HL

Bird beak drill, left and right D=7mm S=13mm L=100mm I=45mm
- I=45mm LT=100mm
- S=13x50mm Z4
- Right- and left-hand rotation HL

Bird beak drill, left and right D=8mm S=13mm L=100mm I=45mm
- I=45mm LT=100mm
- S=13x50mm Z4
- Right- and left-hand rotation HL

Bird beak drill, left and right D=9mm S=13mm L=100mm I=45mm
- I=45mm LT=100mm
- S=13x50mm Z4
- Right- and left-hand rotation HL

Bird beak drill, left and right D=10mm S=13mm L=110mm I=55mm
- I=55mm LT=110mm
- S=13x50mm Z4
- Right- and left-hand rotation HL

Bird beak drill, left and right D=11mm S=13mm L=110mm I=55mm
- I=55mm LT=110mm
- S=13x50mm Z4
- Right- and left-hand rotation HL

Bird beak drill, left and right D=12mm S=13mm L=110mm I=55mm
- I=55mm LT=110mm
- S=13x50mm Z4
- Right- and left-hand rotation HL

Bird beak drill, left and right D=13mm S=13mm L=110mm I=55mm
- I=55mm LT=110mm
- S=13x50mm Z4
- Right- and left-hand rotation HL

Bird beak drill, left and right D=14mm S=13mm L=110mm I=55mm
- I=55mm LT=110mm
- S=13x50mm Z4
- Right-hand and left-hand rotation HL

Bird beak drill, left and right D=15mm S=13mm L=110mm I=55mm
- I=55mm LT=110mm
- S=13x50mm Z4
- Right- and left-hand rotation HL

Bird beak drill, left and right D=16mm S=13mm L=110mm I=55mm
- I=55mm LT=110mm
- S=13x50mm Z4
- Right- and left-hand rotation HL

Bird beak drill, left and right D=6mm S=10mm L=73mm I=28mm
- I=28mm LT=73mm
- S=10x40mm Z4
- Right- and left-hand rotation HL

Bird beak drill, left and right D=8mm S=10mm L=73mm I=28mm
- I=28mm LT=73mm
- S=10x40mm Z4
- Right- and left-hand rotation HL

Bird beak drill, left and right D=10mm S=10mm L=73mm I=28mm
- I=28mm LT=73mm
- S=10x40mm Z4
- Right- and left-hand HL
24 of 48 products shown
Mortising bits with cylindrical shank
A mortising bit, named after the shape of its tip, is a long-hole drill that both drills axially and mills sideways. This lets you work a row of holes in one operation into a clean mortise or into a long slot for a mortise-and-tenon joint. These versions have a smooth cylindrical shank of 10, 13 or 16 mm, which you clamp in the drill chuck or collet of a mortising or long-hole drilling machine.
Usable for left and right
Most of this range is suitable for both left-hand and right-hand rotation; in addition, there are pure right-hand and pure left-hand models. That is useful when your machine runs in both directions or when you want to match the milling direction to the wood grain. Diameters range from 6 to 24 mm, with two, three or four cutting edges, usually in high-alloy steel (HL) and partly in HSS.
Clamping and milling
Clamp the shank sufficiently deep and check the runout: a mortising bit that wobbles mills a mortise that ends up wider than intended. First drill down to depth in steps of a few millimetres, then mill sideways out with a steady feed. Pull the bit back regularly to clear the chips and support the workpiece fully so the bit does not start to bind or deflect.