Dowel drill – threaded shank
Drill banks and dowel machines with screw spindles require a dowel drill with threaded shank. The drill is screwed directly onto the spindle and is therefore mounted without play and exactly in position. With more than two hundred references, this is one of the largest dowel drill ranges in the assortment, fully composed of left-hand and right-hand versions for multi-spindle drill heads.
In addition to standard dowel drills with a 30° centering cone, the range includes versions with an 11 × 4 mm seat and combination drills with countersink. These combination drills create the dowel hole and countersink in one operation, saving a separate machining step for joints assembled with screw and dowel. Always keep the spindle layout of your machine at hand when ordering: direction of rotation and fitting differ per position.
What diameter should the borehole be?
Filters
Availability
D (diameter) in mm
I (effective cutting length) in mm
S (shank) special
S1 (shank diameter 1)
L1 (length 1) in mm
Rotation direction

Dowel drill with countersink, with seat 11x4 mm, right-hand · 330.050.11
- D=5mm
- I=50mm
- S=M10x15mm Z2+V2

Dowel drill with countersink, with seat 11x4 mm, left · 330.050.12
- D=5mm
- I=50mm
- S=M10x15mm Z2+V2

Dowel drill with countersink, with seat 11x4 mm, right-hand · 330.060.11
- D=6mm
- I=50mm
- S=M10x15mm Z2+V2

Dowel drill with countersink, with seat 11x4 mm, left · 330.060.12
- D=6mm
- I=50mm
- S=M10x15mm Z2+V2

Dowel drill with countersink, with seat 11x4 mm, right-hand · 330.080.11
- D=8mm
- I=50mm
- S=M10x15mm Z2+V2

Dowel drill with countersink, with seat 11x4 mm, left · 330.080.12
- D=8mm
- I=50mm
- S=M10x15mm Z2+V2

Dowel drill with countersink, with seat 11x4 mm, right-hand · 330.100.11
- D=10mm
- I=50mm
- S=M10x15mm Z2+V2

Dowel drill with countersink, with seat 11x4 mm, left · 330.100.12
- D=10mm
- I=50mm
- S=M10x15mm Z2+V2

Dowel drill with countersink, with centering cone 30°, right D=5mm LB=55mm I=30mm
- S=M10x25mm Z2+V2
- RH (right-hand rotation) HW

Dowel drill with threaded connection 11×4 mm, right · 338.050.11
- D=5mm
- I=30mm
- S=M10x15mm Z2+V2

Dowel drill with threaded connection, with seat 11x4 mm, left · 338.050.12
- D=5mm
- I=30mm
- S=M10x15mm Z2+V2

Dowel drill with threaded connection 11×4 mm, right · 338.060.11
- D=6mm
- I=30mm
- S=M10x15mm Z2+V2

Dowel drill with threaded connection, with seat 11x4 mm, left · 338.060.12
- D=6mm
- I=30mm
- S=M10x15mm Z2+V2

Dowel drill with threaded connection 11×4 mm, right · 338.080.11
- D=8mm
- I=30mm
- S=M10x15mm Z2+V2

Dowel drill with threaded connection, with seat 11x4 mm, left · 338.080.12
- D=8mm
- I=30mm
- S=M10x15mm Z2+V2

Dowel drill with threaded connection 11×4 mm, right · 338.100.11
- D=10mm
- I=30mm
- S=M10x15mm Z2+V2

Dowel drill with threaded connection, with seat 11x4 mm, left · 338.100.12
- D=10mm
- I=30mm
- S=M10x15mm Z2+V2

Dowel drill with threaded connection 11×4 mm, right · 338.120.11
- D=12mm
- I=30mm
- S=M10x15mm Z2+V2

Dowel drill with threaded connection, with seat 11x4 mm, left · 338.120.12
- D=12mm
- I=30mm
- S=M10x15mm Z2+V2

Dowel drill with threaded connection 11×4 mm, right · 339.050.11
- D=5mm
- I=40mm
- S=M10x15mm Z2+V2

Dowel drill with threaded connection, with seat 11x4 mm, left · 339.050.12
- D=5mm
- I=40mm
- S=M10x15mm Z2+V2

Dowel drill with threaded connection 11×4 mm, right · 339.060.11
- D=6mm
- I=40mm
- S=M10x15mm Z2+V2

Dowel drill with threaded connection, with seat 11x4 mm, left · 339.060.12
- D=6mm
- I=40mm
- S=M10x15mm Z2+V2

Dowel drill with threaded connection 11×4 mm, right · 339.080.11
- D=8mm
- I=40mm
- S=M10x15mm Z2+V2
24 of 106 products shown
Dowel drills with threaded shank
These dowel drills have a shank with external thread, usually M10 and otherwise M8, and are screwed into the drill chuck or directly into the spindle. A 30° centering cone or a 11 x 4 or 9 x 4 mm centering seat ensures that the drill sits centrally and free of play. The range includes diameters from 5 to 14 mm, in left-hand and right-hand versions, for boring machines and dowel drilling machines with multi-spindle drill heads.
Matching thread and centering
First choose the thread of your drill chuck or spindle: M10 is by far the most common in this range, while M8 can be found on a number of machines. Then look at the centering: a drill with a 30° centering cone belongs in a holder with the same cone, and a drill with an 11 x 4 or 9 x 4 mm seat in a holder with that seat. A wrong combination will not center correctly, and you will immediately see that in elongated or shifted dowel holes.
With fixed countersink or in diamond
A large part of the range consists of dowel drills with a fixed countersink: they drill the hole and countersink the edge in one movement, saving a separate operation for screw joints. In addition, there are separate insert countersinks with thread. For large series in abrasive board material, there are PCD diamond versions, which have a shank with clamping flat. Screw each drill in fully to the stop and clean the thread at every change: sawdust in the thread changes the drilling depth.
Why choose a threaded shank instead of a clamping flat?
Which thread size do I need?
Why does my drill bore slightly too deep?
Are these drills available in left-hand and right-hand versions?
Related categories
- Hole saws
- Dowel drill bit – Standard (with clamping flat)
- Dowel drill – Through drill (with flat)
- Diamond drills
- Speed drills
- Dowel drill bit – System (Festool)
- Dowel drill bit – System (Mafell)
- Slot drills
- Forstner Bits
- Rosette Cutters
- Countersinks
- Plug cutters
- Cylindrical head drills
- Industrial lock mortising cutters
- Fish-mouth drills
- Spiral drills
- Square mortise bits