Cutting tools: choice of 20,000 articles
Select language

Dowel drill bit – System (Mafell)

Mafell dowel milling machines use their own drilling system. The dowel drills for the Mafell system in this category are precisely matched to it. This lets you combine the mounting and working method of your Mafell machine with the cutting quality of CMT dowel drills, without compromising fit or hole quality.

The range consists of right-hand-rotating dowel drills that serve as direct replacements for the original drills. Dowel joints depend on dimensionally accurate holes. Therefore, regularly check the cutting edges and the dowel fit on a test piece. If a dowel feels noticeably looser than before, the hole is worn oversize and the drill needs replacing. By replacing the drills on one machine as a set, you maintain identical quality for all holes in the same joint.

Read more about this category
Find what you need faster
Step 1 of 1
Dowel drill, right-hand D=4mm L=58mm L1=20mm I=30mm
Wood-related applications

Dowel drill, right-hand D=4mm L=58mm L1=20mm I=30mm

  • I=30mm LT=58mm
  • S=8x20mm Z2
  • RH (right-hand) HW
€24.30
€29.40 VAT incl.
Code:312.040.11
In stock
Dowel drill, right-hand D=5mm L=58mm L1=20mm I=30mm
Wood-related applications

Dowel drill, right-hand D=5mm L=58mm L1=20mm I=30mm

  • I=30mm LT=58mm
  • S=8x20mm Z2
  • RH (right-hand rotation) HW
€19.20
€23.23 VAT incl.
Code:312.050.11
In stock
Dowel drill, right-hand D=6mm L=58mm L1=20mm I=30mm
Wood-related applications

Dowel drill, right-hand D=6mm L=58mm L1=20mm I=30mm

  • I=30mm LT=58mm
  • S=8x20mm Z2
  • RH (right-hand rotation) HW
€20.00
€24.20 VAT incl.
Code:312.060.11
In stock
Dowel drill, right-hand D=8mm L=58mm L1=20mm I=30mm
Wood-related applications

Dowel drill, right-hand D=8mm L=58mm L1=20mm I=30mm

  • I=30mm LT=58mm
  • S=8x20mm Z2
  • RH (right-hand rotation) HW
€20.60
€24.93 VAT incl.
Code:312.080.11
In stock
Dowel drill, right-hand D=10mm L=58mm L1=20mm I=30mm
Wood-related applications

Dowel drill, right-hand D=10mm L=58mm L1=20mm I=30mm

  • I=30mm LT=58mm
  • S=8x20mm Z2
  • RH (right-hand rotation) HW
€26.10
€31.58 VAT incl.
Code:312.100.11
In stock
Dowel drill, right-hand D=12mm L=58mm L1=20mm I=30mm
Wood-related applications

Dowel drill, right-hand D=12mm L=58mm L1=20mm I=30mm

  • I=30mm LT=58mm
  • S=8x20mm Z2
  • RH (right-hand rotation) HW
€31.90
€38.60 VAT incl.
Code:312.120.11
In stock
Dowel drill, right-hand D=14mm L=58mm L1=20mm I=30mm
Wood-related applications

Dowel drill, right-hand D=14mm L=58mm L1=20mm I=30mm

  • I=30mm LT=58mm
  • S=8x20mm Z2
  • RH (right-hand rotation) HW
€37.30
€45.13 VAT incl.
Code:312.140.11
In stock
Dowel drill, right-hand D=16mm L=58mm L1=20mm I=30mm
Wood-related applications

Dowel drill, right-hand D=16mm L=58mm L1=20mm I=30mm

  • I=30mm LT=58mm
  • S=8x20mm Z2
  • RH (right-hand rotation) HW
€40.50
€49.01 VAT incl.
Code:312.160.11
In stock
About this category

Dowel drills for the Mafell system

These dowel drills are intended for Mafell dowel boring machines. They have an 8 mm shank with a flat, an overall length of 58 mm and a usable cutting length of 30 mm, so they fit exactly in the holder and the set drilling depth on the machine is correct. You will find them in diameters from 4 to 16 mm, always right-hand cutting and with carbide cutting edges — a universal drill with the same diameter is not an alternative here.

Drill and machine form one unit

The machine determines three things: the shank shape that clamps in the holder, the overall length that determines the hole depth, and the diameter that matches the hole pattern. If one of these differs, the result changes. When ordering, therefore, specify the exact machine type, especially when you use drills for multiple machines in the workshop.

Keeping them sharp pays off twice

With dowel joints, hole size is critical: a dull drill pushes the fibre aside instead of cutting it, the hole becomes a few tenths of a millimetre larger and the joint feels loose. Check the cutting edges regularly and replace the drill as soon as the hole edge no longer comes out cleanly. It is best to replace all drills on the same machine at once, then all holes in a joint will remain the same.

Why a drill specifically for Mafell?
Because shank, length and diameter together determine the result. The 8 mm shank with flat must clamp exactly in the holder and the overall length also determines the drilling depth; a universal drill with the same diameter therefore produces a different hole.
Which diameter matches which dowel?
The drilling diameter is the same as the dowel diameter; this range runs from 4 to 16 mm. Drill slightly deeper than half the dowel length, so that there is room for glue and the dowel can sink in completely.
How do I know the drill is blunt?
The hole edge no longer comes out cleanly, you need more pressure and the joint feels looser because the hole becomes a few tenths larger. Replace the drill and test the fit on scrap wood.
Can I use drills from another system?
No, unless shank, length and diameter are specified as identical. Systems usually differ in at least one of those three, and then the drill will not clamp reliably or it will drill to a different depth.
Compiled by Garnotec’s specialist team — specialist in professional cutting tools for more than 30 years. Unsure which version suits your machine or material? Contact our team · View the full range

We use cookies to ensure the website functions properly. In addition, we place analytical cookies (Google Analytics, Microsoft Clarity) to analyse the use of the website. These are only placed after your consent. More information