Dowel drill bit – Standard (with clamping flat)
The workhorses of the drilling programme: almost four hundred dowel drills with clamping flat in standard design. The clamping flat on the shank gives the chuck's clamping screw a flat bearing surface, preventing the drill from slipping or turning. This is the classic mounting for dowel drilling machines and CNC machines.
Within the range you will find not only standard dowel drills in left-hand and right-hand versions, but also variants with a fixed countersink. If you mainly drill solid wood, the standard version remains the most economical choice. Reserve solid carbide dowel drills for board lines with a melamine or HPL top layer.
What diameter should the borehole be?
Filters
Availability
D (diameter) in mm
Connection type
Cutting material
Brand
I (effective cutting length) in mm
L (total length) in mm
L1 (length 1) in mm
S (shank) in mm
Z (number of teeth / cutting edges)
Line
Rotation direction

Dowel drill, right-hand D=8mm L=70mm L1=23mm I=35mm
- I=35mm LT=70mm
- S=10x23mm Z2+V2
- RH (right-hand rotation) HWM

Dowel drill, left D=8mm L=70mm L1=23mm I=35mm
- I=35mm LT=70mm
- S=10x23mm Z2+V2
- LH (left-hand rotation) HWM

Center drill, Right D=8mm I=35mm
- I=35mm LT=70mm
- S=10x27mm Z3+V3
- RH (right-hand) HW

Dowel drill, left-hand D=8mm I=35mm
- I=35mm LT=70mm
- S=10x27mm Z3+V3
- LH (left-hand rotation) HW

Dowel drill, right-hand D=8mm L=70mm L1=30mm I=35mm · 311.080.41
- I=35mm LT=70mm
- S=10x30mm Z2+V2
- RH (right-hand rotation) HW

Dowel drill, left D=8mm L=70mm L1=30mm I=35mm · 311.080.42
- I=35mm LT=70mm
- S=10x30mm Z2+V2
- LH (left-hand) HW

Dowel drill, right-hand D=8mm L=70mm L1=24mm I=30mm
- I=30mm LT=70mm
- S=10x24mm Z2+V2
- RH (right-hand) HW

Dowel drill, left D=8mm L=70mm L1=24mm I=30mm
- I=30mm LT=70mm
- S=10x24mm Z2+V2
- LH (left-hand rotation) HW

Dowel drill, right-hand D=8,2mm L=70mm L1=30mm I=35mm
- I=35mm LT=70mm
- S=10x30mm Z2+V2
- RH (right-hand rotation) HW

Dowel drill, left D=8,2mm L=70mm L1=30mm I=35mm
- I=35mm LT=70mm
- S=10x30mm Z2+V2
- LH (left-hand) HW

Dowel drill, right-hand D=9mm L=70mm L1=30mm I=35mm · 311.090.11
- I=35mm LT=70mm
- S=10x30mm Z2+V2
- RH (right-hand rotation) HW

Dowel drill, left D=9mm L=70mm L1=30mm I=35mm · 311.090.12
- I=35mm LT=70mm
- S=10x30mm Z2+V2
- LH (left-hand rotation) HW

Dowel drill, right-hand D=9mm L=70mm L1=30mm I=35mm · 311.090.41
- I=35mm LT=70mm
- S=10x30mm Z2+V2
- RH (right-hand rotation) HW

Dowel drill, left D=9mm L=70mm L1=30mm I=35mm · 311.090.42
- I=35mm LT=70mm
- S=10x30mm Z2+V2
- LH (left-hand rotation) HW

Dowel drill, right-hand D=9,52mm L=70mm L1=30mm I=35mm
- I=35mm LT=70mm
- S=10x30mm Z2+V2
- RH (right-hand rotation) HW

Dowel drill, left D=9,52mm L=70mm L1=30mm I=35mm
- I=35mm LT=70mm
- S=10x30mm Z2+V2
- LH (left-hand rotation) HW

Dowel drill, right-hand D=10mm L=70mm L1=30mm I=35mm · 311.100.11
- I=35mm LT=70mm
- S=10x30mm Z2+V2
- RH (right-hand rotating) HW

Dowel drill, left D=10mm L=70mm L1=30mm I=35mm · 311.100.12
- I=35mm LT=70mm
- S=10x30mm Z2+V2
- LH (left-hand rotation) HW

Dowel drill, right-hand D=10mm L=70mm L1=30mm I=35mm · 311.100.21
- I=35mm LT=70mm
- S=10x30mm Z2+V2
- RH (right-hand rotating) HW

Dowel drill, left D=10mm L=70mm L1=30mm I=35mm · 311.100.22
- I=35mm LT=70mm
- S=10x30mm Z2+V2
- LH (left-hand rotation) HW

Dowel drill, right-hand D=10mm L=70mm L1=30mm I=35mm · 311.100.41
- I=35mm LT=70mm
- S=10x30mm Z2+V2
- RH (right-hand rotating) HW

Dowel drill, left D=10mm L=70mm L1=30mm I=35mm · 311.100.42
- I=35mm LT=70mm
- S=10x30mm Z2+V2
- LH (left-hand rotation) HW

Dowel drill, right-hand D=10mm L=70mm L1=24mm I=30mm
- I=30mm LT=70mm
- S=10x24mm Z2+V2
- RH (right-hand rotation) HW

Dowel drill, left D=10mm L=70mm L1=24mm I=30mm
- I=30mm LT=70mm
- S=10x24mm Z2+V2
- LH (left-hand rotation) HW
24 of 374 products shown
Standard dowel drills, with clamping flat
This is the standard version of the dowel drill: a shank with a clamping flat on which the clamping screw of the drill chuck grips. It is the most widely used dowel drill in the furniture industry, because the fit is free of play and the drill cannot slip or drop down at high feed rates.
Hole wall and bottom determine the strength
A dowel joint is only as strong as the glue surface in the hole. The two sharp pre-cutters of a dowel drill cut the grain all around, keeping the wall smooth and giving the glue grip; the flat bottom ensures that the dowel can sink in completely and does not tilt. A standard twist drill leaves a rough wall and a pointed bottom, with less gluing surface.
Direction of rotation and versions
On a multi-spindle drill head, the spindles rotate alternately left and right, and a dowel drill is ground for one direction only: a right-hand drill in a left-hand rotating spindle does not cut, but pushes and burns. That is why virtually every size is available in both directions. The range runs from 1.3 to 19.5 mm, including inch sizes such as 6.35 and 9.52 mm, with a shank of 10 or 8 mm. In addition to brazed carbide, there are solid carbide and PCD diamond versions for abrasive panel material, and dowel drills with fixed countersink.
Why use a dowel drill or dowel bit and not a standard twist drill?
How deep do I drill a dowel hole?
How do I know which direction of rotation I need?
Why is my drill burning the hole?
Related categories
- Hole saws
- Dowel drill – Through drill (with flat)
- Diamond drills
- Speed drills
- Dowel drill bit – System (Festool)
- Dowel drill bit – System (Mafell)
- Slot drills
- Forstner Bits
- Rosette Cutters
- Dowel drill – threaded shank
- Countersinks
- Plug cutters
- Cylindrical head drills
- Industrial lock mortising cutters
- Fish-mouth drills
- Spiral drills
- Square mortise bits