Indexable inserts
Tools with an indexable insert system do not need regrinding: you turn or replace the inserts and can mill again with a sharp edge within minutes. This category indexable inserts for cutters and planer heads includes more than seven hundred versions. You will find HWM inserts in various lengths, such as 30 mm, packed per 2 or 10 pieces, including inserts according to the Leitz system.
Always choose indexable inserts exactly according to the system of your cutter head or planer head. The clamping geometry differs from system to system and an insert that only almost fits is unsafe. Always replace inserts as a complete set and make sure the clamping surfaces are clean: one new insert between worn inserts can throw the head out of balance. Packs of 10 pieces also lower the cost for those who change inserts regularly.
Filters
Availability
A (cutting angle)
K (thickness)
Cutting material
Brand
L (total length) in mm
L1 (length 1) in mm
R (radius) in mm
Z (number of teeth / cutting edges)
I (effective cutting length) in mm
Markings (connection)
R in degrees
Chip breaker
d (small diameter) in mm
D (diameter) in mm
Material to be machined
Packaging unit

HWM reversible knives VERSOFIX" (per 10 pcs.)" L=30mm K=1,5mm H=10mm
- L=30x10x1,5 35°
- Z4 KCR08 S1920
- 10 pieces

HWM reversible knives VERSOFIX" (per 2 pcs.)" L=30mm K=1,5mm H=10mm
- L=30x10x1,5 35°
- Z4 KCR08 S1920
- 2 pieces

HWM reversible knives 31.5mm (per 10 pcs.) L=31,5mm L1=14mm
- L=31,5x9x1,5 35°
- Z4 KCR08 S1920
- 10 pieces

HWM replaceable knives (2 pcs.) L=31,5mm K=1,5mm H=9mm
- L=31,5x9x1,5 35°
- Z4 KCR08
- 2 pieces

HWM replaceable knives (2 pcs.) L=30mm K=1,1mm H=5,5mm · 790.320.01PP
- L=30x5,5x1,1 35°
- Z4 MG06 S2020
- 2 pieces

Center point for an HC35 hole saw (per 10 pcs.) L=33,5mm K=3mm
- L=33,5x3
- Z1 MG18
- 10 pieces

Special knives (per 1 pc.) L=33,5mm K=3mm
- L=33,5x3
- Z1 MG18
- 1 piece

HWM reversible knives Leitz system (per 10 pcs.) L=35mm
- L=35x8x1,5 40°
- Z2 KCR05
- 10 pieces

HWM spare blade (per 10 pcs.) L=36mm L1=26mm K=1,5mm Z4 · 790.360.01
- L=36x12x1,5 35°
- Z4 HC05 F1730
- 10 pieces

HWM spare knife (per 2 pcs.) L=36mm L1=26mm Z4 · 790.360.01PP
- L=36x12x1,5 35°
- Z4 HC05 F1730
- 2 pieces

HWM spare blade (per 10 pcs.) L=36mm L1=26mm K=1,5mm Z4 · 790.360.03
- L=36x12x1,5 35°
- Z4 SMG02 U2300
- 10 pieces

HWM reversible knives (per 10 pcs.) L=39,5mm H=12mm d=4,1mm · 790.395.06
- L=39,5x12x1,5 35°
- Z4 KCR08 S1920
- 10 pieces

HWM replaceable knives (2 pcs.) L=39,5mm K=1,5mm H=12mm
- L=39,5x12x1,5 35°
- Z4 KCR08 S1920
- 2 pieces

HWM reversible knives (per 10 pcs.) L=39,5mm H=9mm d=4,1mm · 790.395.09
- L=39,5x9x1,5 35°
- Z4 HC05 F1730
- 10 pieces

HWM replaceable knives (2 pcs.) L=39,5mm K=1,5mm H=9mm
- L=39,5x9x1,5 35°
- Z4 KCR08 S1920
- 2 pieces

HWM reversible knives 40mm (per 2 pcs.) · 790.400.00PP
- L=40x12x1,5 35°
- Z2 HC05 F1730
- 2 pieces

HWM reversible knives 40mm (per 10 pcs) d=4,1mm · 790.400.04
- L=40x12x1,5 35°
- Z2 KCR02+ 2240
- 10 pieces

HWM reversible knives 40mm (per 2 pcs.) · 790.400.04PP
- L=40x12x1,5 35°
- Z2 KCR02+ 2240
- 2 pieces

HWM reversible knives 40mm (per 10 pcs) d=4,1mm · 790.400.06
- L=40x12x1,5 35°
- Z2 KCR08 S1920
- 10 pieces

HWM reversible knives 40mm (per 2 pcs.) · 790.400.06PP
- L=40x12x1,5 35°
- Z2 KCR08 S1920
- 2 pieces

HWM reversible knives 40mm (per 10 pcs) d=4,1mm · 790.400.69
- L=400x9x1,5 35°
- Z2 KCR08 S1920
- 10 pieces

HWM reversible knives 40mm (per 2 pcs.) · 790.400.69PP
- L=400x9x1,5 35°
- Z2 KCR08 S1920
- 2 pieces

HWM reversible knives Leitz system (per 10 pcs.) L=40mm
- L=40x8x1,5 40°
- Z2 KCR05
- 10 pieces

HWM reversible knives 48.3mm (per 10 pcs.) · 790.483.03
- L=48,3x12x1,5 <5°
- 35° Z4 SMG02 U2300
- 10 pieces
24 of 644 products shown