Carbide hole saws 550G
The 550G range offers an extensive assortment of carbide hole saws for a wide variety of applications and diameters. In addition to standard sizes, you will also find exceptionally large versions of D=185 mm and even D=270 mm, sizes rarely found in standard ranges. These carbide hole saws in the green GRN version are therefore the ideal choice for large openings, such as holes for ventilation ducts or recessed lighting. The larger the diameter, the more important low speed and stable guidance become: clamp your workpiece securely and let the teeth engage evenly. This keeps the cut clean and the teeth last significantly longer.
What diameter should the borehole be?
Filters
Availability
D (diameter) in mm
Z (number of teeth / cutting edges)
Material to be machined

Hole saw, carbide D=76mm I=60mm
- Wood, brick, plastic, ...
- Cutting material: Carbide

Hole saw, Carbide D=79mm I=60mm
- Wood, brick, plastic, ...
- Cutting material: Carbide

Hole saw, carbide D=80mm I=60mm
- Wood, brick, plastic, ...
- Cutting material: Carbide

Hole saw, carbide D=82mm I=60mm
- Wood, brick, plastic, ...
- Cutting material: Carbide

Hole saw, carbide D=83mm I=60mm
- Wood, brick, plastic, ...
- Cutting material: Carbide

Hole saw, Carbide D=89mm I=60mm
- Wood, brick, plastic, ...
- Cutting material: Carbide

Hole saw, carbide D=92mm I=60mm
- Wood, brick, plastic, ...
- Cutting material: Carbide

Hole saw, carbide D=102mm I=60mm
- Wood, brick, plastic, ...
- Cutting material: Carbide

Carbide hole saw D=105mm I=60mm
- Wood, brick, plastic, ...
- Cutting material: Carbide

Hole saw, carbide D=108mm I=60mm
- Wood, brick, plastic, ...
- Cutting material: Carbide

Hole saw, Carbide D=111mm I=60mm
- Wood, brick, plastic, ...
- Cutting material: Carbide

Hole saw, carbide D=114mm I=60mm
- Wood, brick, plastic, ...
- Cutting material: Carbide

Hole saw, carbide D=118mm I=60mm
- Wood, brick, plastic, ...
- Cutting material: Carbide

Carbide Hole Saw D=127mm I=60mm
- Wood, brick, plastic, ...
- Cutting material: Carbide

Hole saw, Carbide D=133mm I=60mm
- Wood, brick, plastic, ...
- Cutting material: Carbide

Hole saw, Carbide D=152mm I=60mm
- Wood, brick, plastic, ...
- Cutting material: Carbide

Hole Saw, Carbide D=160mm I=60mm
- Wood, brick, plastic, ...
- Cutting material: Carbide

Hole saw, Carbide D=168mm I=60mm
- Wood, brick, plastic, ...
- Cutting material: Carbide

Hole saw, carbide D=185mm I=60mm
- Wood, brick, plastic, ...
- Cutting material: Carbide

Hole saw, carbide D=210mm I=60mm
- Wood, brick, plastic, ...
- Cutting material: carbide

Hole saw, carbide D=225mm I=60mm
- Wood, brick, plastic, ...
- Cutting material: Carbide

Hole saw, carbide D=270mm I=60mm
- Wood, brick, plastic, ...
- Cutting material: Carbide
22 of 46 products shown
Carbide hole saws 550G: hole saws for wood and panel materials
The GRN Tools carbide hole saws 550G are hole saws for wood and panel materials with a classic screw connection. The carbide teeth cut solid wood, MDF, particle board, plywood, OSB and blockboard, as well as coated panels such as melamine, HPL and solid core, plastic and solid surface. The range includes 46 diameters from 19 to 270 mm, with a useful cutting depth of 60 mm.
Screw connection 1/2" and 5/8"
The diameters from 19 to 30 mm have a 1/2" connection, while sizes from 32 mm have a 5/8" connection. GRN holders are matched to this: the traditional hole saw holder is available for diameters below and from 32 mm, and for the S-Lock quick-change system there are adapters in the same two ranges. So first choose how you want to work — screw on permanently or change quickly — and then select the holder or adapters for the sizes you use.
Large diameters up to 270 mm
In addition to the common sizes, the 550G includes large diameters of 152, 160, 168, 185, 210, 225, 260 and 270 mm, for openings in ventilation ducts, drains and recessed lighting. The larger the hole saw, the higher the cutting speed at the teeth at the same rpm: therefore work at the lowest speed of your machine, clamp the workpiece firmly and let the teeth engage evenly. A side handle gives noticeably more control with these sizes.
What is the difference with the 550 and the 550X?
Which materials does the 550G cut?
How do you cut in solid surface and HPL?
Can you use the 550G later on a quick-change system?
Related categories
- Diamond drills
- Carbide hole saws 550X
- Carbide hole saws 550
- Speed drills
- Carbide hole saws 553
- Forstner Bits
- Bi-metal hole saws 551G
- Slot drills
- Rosette Cutters
- Bi-metal hole saws 551X
- Bi-metal hole saws 551
- Countersinks
- Plug cutters
- Cylindrical head drills
- Hole Saw Sets
- Dowel drills
- Accessories for hole saws
- Industrial lock mortising cutters
- Fish-mouth drills
- Spiral drills
- Square mortise bits