Dowel drills
Dowel drills bore exact holes for dowel joints — the foundation of cabinet and furniture making. Their centre point and pre-cutters produce a clean, dimensionally accurate hole in which the dowel clamps without a gap. The range includes standard dowel drills with tang (the tang prevents slipping in the drill chuck), through-hole drills for continuous holes, versions with threaded shank for line boring machines, and system drills for Festool (Domino) and Mafell dowel machines. Left-hand and right-hand versions, in all dowel sizes. The matching drill holders can be found in the drill holders for dowel drills category. Drill dowel holes a fraction deeper than half the dowel length — this leaves room for glue and ensures the joint closes tightly.
Which type of article are you looking for?
RequiredThis way, we immediately show only the articles, questions and filters that belong to that group.
Filters
Availability
D (diameter) in mm
Connection type
B (bore) in mm
Cutting material
Brand
I (effective cutting length) in mm
L (total length) in mm
L1 (length 1) in mm
S (shank) in mm
S (shank) special
S1 (shank diameter 1)
Z (number of teeth / cutting edges)
Line
Rotation direction

Dowel drill, right-hand D=3mm L=55,5mm L1=20mm I=18mm
- I=18mm LT=55,5mm
- S=8x20mm Z2+V2
- RH (right-hand rotation) HWM

Dowel drill, right-hand D=5mm L=55,5mm L1=20mm I=30mm
- I=30mm LT=55,5mm
- S=8x20mm Z2+V2
- RH (right-hand rotating) HW

Dowel drill, left D=5mm L=55,5mm L1=20mm I=30mm
- I=30mm LT=55,5mm
- S=8x20mm Z2+V2
- LH (left-hand) HW

Dowel drill, right-hand D=5,55mm L=55,5mm L1=20mm I=30mm
- I=30mm LT=55,5mm
- S=8x20mm Z2+V2
- RH (right-hand rotation) HW

Dowel drill, left D=5,55mm L=55,5mm L1=20mm I=30mm
- I=30mm LT=55,5mm
- S=8x20mm Z2+V2
- LH (left-hand) HW

Dowel drill, right-hand D=6mm L=55,5mm L1=20mm I=30mm
- I=30mm LT=55,5mm
- S=8x20mm Z2+V2
- RH (right-hand rotation) HW

Dowel drill, left D=6mm L=55,5mm L1=20mm I=30mm
- I=30mm LT=55,5mm
- S=8x20mm Z2+V2
- LH (left-hand) HW

Dowel drill, right-hand D=6,35mm L=55,5mm L1=20mm I=30mm
- I=30mm LT=55,5mm
- S=8x20mm Z2+V2
- RH (right-hand rotation) HW

Dowel drill, left D=6,35mm L=55,5mm L1=20mm I=30mm
- I=30mm LT=55,5mm
- S=8x20mm Z2+V2
- LH (left-hand) HW

Dowel drill, right-hand D=7mm L=55,5mm L1=20mm I=30mm
- I=30mm LT=55,5mm
- S=8x20mm Z2+V2
- RH (right-hand rotation) HW

Dowel drill, left D=7mm L=55,5mm L1=20mm I=30mm
- I=30mm LT=55,5mm
- S=8x20mm Z2+V2
- LH (left-hand rotation) HW

Dowel drill, right-hand D=8mm L=55,5mm L1=20mm I=30mm
- I=30mm LT=55,5mm
- S=8x20mm Z2+V2
- RH (right-hand rotation) HW

Dowel drill, left D=8mm L=55,5mm L1=20mm I=30mm
- I=30mm LT=55,5mm
- S=8x20mm Z2+V2
- LH (left-hand rotation) HW

Dowel drill, right-hand D=9mm L=55,5mm L1=20mm I=30mm
- I=30mm LT=55,5mm
- S=8x20mm Z2+V2
- RH (clockwise rotating) HW

Dowel drill, left D=9mm L=55,5mm L1=20mm I=30mm
- I=30mm LT=55,5mm
- S=8x20mm Z2+V2
- LH (left-hand rotating) HW

Dowel drill, right-hand D=10mm L=55,5mm L1=20mm I=30mm
- I=30mm LT=55,5mm
- S=8x20mm Z2+V2
- RH (right-hand rotation) HW

Dowel drill, left D=10mm L=55,5mm L1=20mm I=30mm
- I=30mm LT=55,5mm
- S=8x20mm Z2+V2
- LH (left-hand rotation) HW

Dowel drill, right-hand D=12mm L=55,5mm L1=20mm I=30mm
- I=30mm LT=55,5mm
- S=8x20mm Z2+V2
- RH (right-hand rotation) HW

Dowel drill, left D=12mm L=55,5mm L1=20mm I=30mm
- I=30mm LT=55,5mm
- S=8x20mm Z2+V2
- LH (left-hand rotation) HW

Dowel drill right-hand, carbide D=10mm
- I=40mm LT=67mm
- S=8x20mm Z2+V2
- RH (right-hand) HW

Dowel drill right-hand, carbide D=6mm
- I=40mm LT=67mm
- S=8x20mm Z2+V2
- RH (right-hand rotation) HW

Dowel drill, right-hand D=5mm L=67mm L1=20mm I=40mm
- I=40mm LT=67mm
- S=8x20mm Z2+V2
- RH (right-hand rotation) HW

Dowel drill, left D=5mm L=67mm L1=20mm I=40mm
- I=40mm LT=67mm
- S=8x20mm Z2+V2
- LH (left-hand rotating) HW

Dowel drill, right-hand D=5,55mm L=67mm L1=20mm I=40mm
- I=40mm LT=67mm
- S=8x20mm Z2+V2
- RH (right-hand) HW
24 of 651 products shown
Dowel drills for dowel joints
A dowel drill — also called a dowel bit — drills the hole into which a wooden dowel fits exactly. That requires more than just a hole to size: the wall must be smooth and the bottom flat, so the glue gets grip and the dowel does not tilt. These drills are mainly made for series work on drilling machines and drilling stands, with system drills also available for the dowel machines from Festool and Mafell.
Which shank version do you need?
The range follows the mounting of your machine: standard with clamping flat for the common drill heads, with threaded shank (usually M10 or M8) for machines that screw the drill in, and as through drill for holes that go through the workpiece. There are also dowel drills with fixed countersink. In addition, there are system drills for Festool and Mafell, precisely matched to those machines.
Left-hand or right-hand rotating
Drilling machines have alternating left- and right-hand rotating spindles, and a dowel drill is ground for one direction of rotation. Check which direction you need for each order — a right-hand rotating drill in a left-hand rotating spindle will not cut, but push and burn. The direction of rotation is stated on the drill and in the product details.
Which dowel drill diameter matches which dowel?
What is the difference between a dowel drill and a twist drill?
How do I know whether I need a left-hand or right-hand rotating drill?
Do these drills fit in a regular hand drill?
Related categories
- Hole saws
- Cutters
- Diamond drills
- Saws
- Speed drills
- Forstner Bits
- Slot drills
- Knives
- CNC accessories
- Rosette Cutters
- Countersinks
- Machines & accessories
- Parts
- Plug cutters
- Cylindrical head drills
- Fan Items
- Industrial lock mortising cutters
- Fish-mouth drills
- Sharpening and Adjustment Service
- Spiral drills
- Square mortise bits