Dowel drill bit – System (Mafell)
Mafell dowel milling machines use their own drilling system. The dowel drills for the Mafell system in this category are precisely matched to it. This lets you combine the mounting and working method of your Mafell machine with the cutting quality of CMT dowel drills, without compromising fit or hole quality.
The range consists of right-hand-rotating dowel drills that serve as direct replacements for the original drills. Dowel joints depend on dimensionally accurate holes. Therefore, regularly check the cutting edges and the dowel fit on a test piece. If a dowel feels noticeably looser than before, the hole is worn oversize and the drill needs replacing. By replacing the drills on one machine as a set, you maintain identical quality for all holes in the same joint.
What diameter should the borehole be?
Filters
D (diameter) in mm

Dowel drill, right-hand D=4mm L=58mm L1=20mm I=30mm
- I=30mm LT=58mm
- S=8x20mm Z2
- RH (right-hand) HW

Dowel drill, right-hand D=5mm L=58mm L1=20mm I=30mm
- I=30mm LT=58mm
- S=8x20mm Z2
- RH (right-hand rotation) HW

Dowel drill, right-hand D=6mm L=58mm L1=20mm I=30mm
- I=30mm LT=58mm
- S=8x20mm Z2
- RH (right-hand rotation) HW

Dowel drill, right-hand D=8mm L=58mm L1=20mm I=30mm
- I=30mm LT=58mm
- S=8x20mm Z2
- RH (right-hand rotation) HW

Dowel drill, right-hand D=10mm L=58mm L1=20mm I=30mm
- I=30mm LT=58mm
- S=8x20mm Z2
- RH (right-hand rotation) HW

Dowel drill, right-hand D=12mm L=58mm L1=20mm I=30mm
- I=30mm LT=58mm
- S=8x20mm Z2
- RH (right-hand rotation) HW

Dowel drill, right-hand D=14mm L=58mm L1=20mm I=30mm
- I=30mm LT=58mm
- S=8x20mm Z2
- RH (right-hand rotation) HW

Dowel drill, right-hand D=16mm L=58mm L1=20mm I=30mm
- I=30mm LT=58mm
- S=8x20mm Z2
- RH (right-hand rotation) HW
Dowel drills for the Mafell system
These dowel drills are intended for Mafell dowel boring machines. They have an 8 mm shank with a flat, an overall length of 58 mm and a usable cutting length of 30 mm, so they fit exactly in the holder and the set drilling depth on the machine is correct. You will find them in diameters from 4 to 16 mm, always right-hand cutting and with carbide cutting edges — a universal drill with the same diameter is not an alternative here.
Drill and machine form one unit
The machine determines three things: the shank shape that clamps in the holder, the overall length that determines the hole depth, and the diameter that matches the hole pattern. If one of these differs, the result changes. When ordering, therefore, specify the exact machine type, especially when you use drills for multiple machines in the workshop.
Keeping them sharp pays off twice
With dowel joints, hole size is critical: a dull drill pushes the fibre aside instead of cutting it, the hole becomes a few tenths of a millimetre larger and the joint feels loose. Check the cutting edges regularly and replace the drill as soon as the hole edge no longer comes out cleanly. It is best to replace all drills on the same machine at once, then all holes in a joint will remain the same.
Why a drill specifically for Mafell?
Which diameter matches which dowel?
How do I know the drill is blunt?
Can I use drills from another system?
Related categories
- Hole saws
- Dowel drill bit – Standard (with clamping flat)
- Diamond drills
- Dowel drill – Through drill (with flat)
- Dowel drill bit – System (Festool)
- Speed drills
- Slot drills
- Forstner Bits
- Dowel drill – threaded shank
- Rosette Cutters
- Countersinks
- Plug cutters
- Cylindrical head drills
- Industrial lock mortising cutters
- Fish-mouth drills
- Spiral drills
- Square mortise bits