T-slot cutters
A T-shaped slot lets a bolt head or nut slide recessed into the material — the basis of many hanging systems, jigs and workbenches. With a T-slot cutter, you make that slot in two steps: first a straight groove, then the T-cutter widens the bottom to create the typical T-profile. The range consists of HW versions, including a cutter matched to M6 bolts. Match the cutter size to the hardware that must run in it: the bolt head needs a little clearance, but too much play will let the hardware tilt. Mill the preparatory groove exactly to the depth of the T-cutter and feed steadily — the cutter cuts hidden underneath and can clear chips less easily than a normal slot cutter.
What type of shaft would you like to use?
Filters
Availability
Brand
S (shank) in mm
Shank dimensions
Z (number of teeth / cutting edges)
I (effective cutting length) in mm
L (total length) in mm
Line
S (shank) in inches
d (small diameter) in mm
I1 (short cutting length)
D (diameter) in mm
Material to be machined

Keyhole cutter, carbide D=9,5mm L=54mm I=11mm d=4,8mm · 750.001.11
- D=9,5 x 11mm L=54
- S=6 Z2

Keyhole cutter, carbide D=9,5mm L=54mm I=11mm d=4,8mm · 850.001.11
- D=9,5 x 11mm L=54
- S=6,35 Z2

Keyhole cutter, carbide D=9,5mm L=54mm I=11mm d=4,8mm · 850.501.11
- D=9,5 x 11mm L=54
- S=12,7 Z2

Keyhole cutter, carbide D=30mm L=60,3mm I=17,5mm d=9,5mm
- D=30 x 17.5mm L=60,3
- S=12,7 Z2

Keyhole cutter, carbide D=34,9mm L=63,5mm I=22,2mm d=12,7mm · 850.602.11
- D=34,9 x 22.2mm L=63,5
- S=12,7 Z2

Keyhole cutter, carbide D=28mm L=56,3mm I=13,5mm d=11mm
- D=28 x 13.5mm L=56,3
- S=12,7 Z2

T-slot cutter, HW D=9,5mm L=54mm I=11mm d=4,8mm · 950.001.11
- D=9,5 x 11mm L=54
- S=8 Z2

T-slot cutter, (bolt M5)., HW D=8,5mm S=8mm
- D=8,5 x 11,5mm L=48
- S=8 Z2

T-slot cutter, (bolt M6)., HW D=10,5mm S=8mm
- D=10,5 x 12,5mm L=48
- S=8 Z1

T-slot cutter, (bolt M8), HW D=13,5mm S=8mm
- D=13,5 x 15mm L=48
- S=8 Z1

Router bit for T-slots, (bolt M10) D=17,5mm S=8mm
- D=17,5 x 16,5mm L=48
- S=8 Z2

T-slot cutter, (bolt M12) D=19,5mm S=8mm
- D=19,5 x 17,5mm L=48
- S=8 Z2

T-slot cutter, HW D=30mm L=60,3mm I=17,5mm
- D=30 x 17,5mm L=60,3
- S=8 Z2

T-slot cutter, HW D=28mm L=56,3mm I=13,5mm
- D=28 x 13,5mm L=56,3
- S=8 Z2

T-slot cutter, HW D=9,5mm L=54mm I=11mm d=4,8mm · 950.501.11
- D=9,5 x 11mm L=54
- S=12 Z1

T-slot cutter, HW D=30mm L=60mm I=17,5mm d=9,5mm
- D=30 x 17,5mm L=60
- S=12 Z2

T-slot cutter, HW D=34,9mm L=63,5mm I=22,2mm d=12,7mm · 950.602.11
- D=34,9 x 22,2mm L=63,5
- S=12 Z2

T-slot cutter, HW D=28mm L=56mm I=13,5mm d=11mm
- D=28 x 13,5mm L=56
- S=12 Z2

T-slot cutter, HW D=32mm L=66mm I=20mm d=15mm
- D=32 x 20mm L=66
- S=12 Z2

T-slot router bit (contractor), HW D=9,5mm S=8mm
- D=9,5 x 11,1mm L=48
- S=8 Z2
Related categories
- Straight fluting cutters
- Spiral routers
- Moulder cutters with bore
- Diamond cutters
- Straight edge cutters
- Chamfer Bits
- Round-over bits
- Profile routers
- Profile and counterprofile cutters
- V-groove cutters
- Disk Cutters
- Disc cutter parts
- Dovetail Cutters
- Rabbet cutters
- Handle cutters
- Panel cutters
- Drawer cutters
- Joinery cutters
- Surfacing cutters
- Ball-nose cutters
- Core box routers
- Half-Round Cutters
- Semi-round router bits
- Quarter round cutters
- 2D / 3D cutters
- Other Router Bits
- Router sets