2D / 3D cutters
Relief panels, mouldings and carved details call for a router bit that can handle both contours and smooth surfaces. The 2D/3D spiral router bits in this category are made for that: one tool on the CNC that handles both cutting two-dimensional shapes and tracing three-dimensional reliefs. The spiral cutting edges evacuate chips efficiently and leave a surface that requires little sanding. Within the range you will find several versions of the 2D/3D spiral router bit, so you can match the cutter to the fineness of the relief and the hardness of the material. A practical rule of thumb: use a separate roughing pass for the coarse pre-work and reserve the 2D/3D bit for the finishing pass — this keeps the tip sharp for longer and enhances the final detail.
What type of shaft would you like to use?
Filters
D (diameter) in mm
A (cutting angle)
I (effective cutting length) in mm
L (total length) in mm
R (radius) in mm
S (shank) in mm
Shank dimensions
Z (number of teeth / cutting edges)
S (shank) in inches
Material to be machined

2D/3D spiral router bit D=0,8mm L=70mm I=25mm A=5,5°
- D=0,8 mm x I=25 mm
- S=6 mm L=70 mm
- Z=3 HWM

2D/3D spiral router bit D=1,6mm L=70mm I=25mm A=4,5°
- D=1,6 mm x I=25 mm
- S=6 mm L=70 mm
- Z=3 HWM

2D/3D spiral router bit D=3,2mm L=70mm I=30mm A=2,5°
- D=3,2 mm x I=30 mm
- S=6 mm L=70 mm
- Z=3 HWM

2D/3D spiral router bit D=0,8mm L=76,2mm I=25,4mm A=6,2°
- D=0,8 mm x I=25,4 mm
- S=6,35 mm L=76,2 mm
- Z=3 HWM

2D/3D spiral router bit D=1,6mm L=76,2mm I=25,4mm A=5,4°
- D=1,6 mm x I=25,4 mm
- S=6,35 mm L=76,2 mm
- Z=3 HWM

2D/3D spiral router bit D=3,2mm L=76,2mm I=25,4mm A=3,6°
- D=3,2 mm x I=25,4 mm
- S=6,35 mm L=76,2 mm
- Z=3 HWM

2D/3D spiral router bit D=1,6mm L=80mm I=30mm A=5,5°
- D=1,6 mm x I=30 mm
- S=8 mm L=80 mm
- Z=3 HWM

2D/3D spiral router bit D=3,2mm L=90mm I=50mm A=2,5°
- D=3,2 mm x I=50 mm
- S=8 mm L=90 mm
- Z=3 HWM

2D/3D spiral router bit D=2mm L=120mm I=80mm A=3°
- D=2 mm x I=80 mm
- S=12 mm L=120 mm
- Z=2 HWM

2D/3D spiral router bit D=6mm L=100mm I=50mm A=3°
- D=6 mm x I=50 mm
- S=12 mm L=100 mm
- Z=2 HWM

2D/3D spiral router bit D=6,4mm L=101,6mm I=50,8mm A=3°
- D=6,4 mm x I=50,8 mm
- S=12,7 mm L=101,6 mm
- Z=2 HWM
Related categories
- Straight fluting cutters
- Spiral routers
- Moulder cutters with bore
- Diamond cutters
- Straight edge cutters
- Chamfer Bits
- Round-over bits
- Profile routers
- Profile and counterprofile cutters
- V-groove cutters
- Disk Cutters
- Disc cutter parts
- Dovetail Cutters
- Rabbet cutters
- Handle cutters
- Panel cutters
- Drawer cutters
- Joinery cutters
- T-slot cutters
- Surfacing cutters
- Ball-nose cutters
- Core box routers
- Half-Round Cutters
- Semi-round router bits
- Quarter round cutters
- Other Router Bits
- Router sets