Straight fluting cutters
Straight fluting cutters are versatile cutters for making grooves, slots, recesses and joints in materials such as hardwood, softwood, panel materials and plastics. They are suitable for use with a handheld router, router table and CNC machine. At Garnotec you will find an extensive range of straight fluting cutters from CMT Orange Tools and GRN Tools in various diameters and versions. Thanks to the high-quality carbide (HW) cutting edges, these cutters ensure a precise finish, optimum cutting quality and a long service life.
What diameter do you want to mill?
Filters
Availability
D (diameter) in mm
Connection type
Cutting material
Brand
I (effective cutting length) in mm
L (total length) in mm
L1 (length 1) in mm
S (shank) in mm
S (shank) special
Shank dimensions
Fixed or indexable knives
EU safety standard
Z (number of teeth / cutting edges)
Entry cut
Line
S (shank) in inches
Rotation direction
Material to be machined

Straight flute cutter, HW D=12,7mm L=108mm I=50,8mm · 812.628.11
- D=12,7 x 50,8mm L=108
- S=12,7 Z2

Straight flute cutter, HW D=12,7mm L=108mm I=50,8mm · 812.628.11-X10
- D=12,7 x 50,8mm L=108
- S=12,7 Z2

Straight flute cutter, HW D=12,7mm L=111mm I=63,5mm
- D=12,7 x 63,5mm L=111
- S=12,7 Z2

Straight flute cutter, HW D=16mm L=70mm I=31,7mm
- D=16 x 31,7mm L=70
- S=12,7 Z2

Straight flute cutter, HW D=19mm L=82,5mm I=38,1mm
- D=19 x 38,1mm L=82,5
- S=12,7 Z2

Straight flute cutter, HW D=19mm L=92mm I=50,8mm
- D=19 x 50,8mm L=92
- S=12,7 Z2

Profile cutter, HW D=19mm L=57mm I=9,5mm
- D=19 x 9,5mm L=57
- S=6,35 Z2

Profile cutter, HW D=19mm L=63,5mm I=9,5mm
- D=19 x 9,5mm L=63,5
- S=12,7 Z2

Profile cutter, HW D=25,4mm L=57mm I=9,5mm
- D=25,4 x 9,5mm L=57
- S=12,7 Z2

Profile cutter, HW D=31,75mm L=70mm I=15,87mm
- D=31,75 x 15,8mm L=70
- S=12,7 Z2

Profile cutter, HW D=38,1mm L=70mm I=15,87mm
- D=38,1 x 15,87mm L=70
- S=12,7 Z2

Rabbet and edge router bit with angled cutters, HW D=12,7mm S=8mm L=54mm I=19mm
- D=12,7 x 19mm L=54
- S=8 Z2

Rabbet and edge router bit with angled cutters, HW D=16mm S=8mm L=54mm I=19mm
- D=16 x 19mm L=54
- S=8 Z2

Rabbet and edge router bit with angled cutters, HW D=18mm S=8mm L=48mm I=16mm
- D=18 x 12mm L=48
- S=8 Z2

Rabbet and edge router bit with angled cutters, HW D=19mm S=8mm L=54mm I=19mm
- D=19 x 19mm L=54
- S=8 Z2

Rabbet and edge router bit with angled cutters, HW D=20mm S=8mm L=48mm I=16mm
- D=20 x 16mm L=48
- S=8 Z2

Rabbet and edge router bit with angled cutters, HW D=12,7mm S=12mm L=60mm I=19mm
- D=12,7 x 19mm L=60
- S=12 Z2

Rabbet and edge router bit with angled cutters, HW D=31,7mm S=12mm L=54mm I=12,7mm
- D=31,7 x 12.7mm L=54
- S=12 Z2

Rabbet and edge router bit with angled cutters, HW D=12mm S=8mm L=38mm I=12mm
- D=12 x 12.7mm L=38
- S=8 Z2

Rabbet and edge router bit with angled cutters, HW D=13mm S=8mm L=38mm I=12mm
- D=13 x 12.7mm L=38
- S=8 Z2

Rabbet and edge router bit with angled cutters, HW D=14mm S=8mm L=38mm I=12mm
- D=14 x 12.7mm L=38
- S=8 Z2

Rabbet and edge router bit with angled cutters, HW D=15mm S=8mm L=38mm I=12mm
- D=15 x 12.7mm L=38
- S=8 Z2

Rabbet and edge router bit with angled cutters, HW D=16mm S=8mm L=38mm I=12mm
- D=16 x 12.7mm L=38
- S=8 Z2

Rabbet and edge router bit with angled cutters, HW D=18mm S=8mm L=38mm I=12mm
- D=18 x 12.7mm L=38
- S=8 Z2
24 of 478 products shown
Choosing a grooving cutter: straight slot drills for grooves and rebates
The straight slot drill is the most commonly used cutter in the workshop. With one straight cut you can make grooves for back panels and partitions, rebates along an edge, recesses for hardware and mortise-and-tenon joints. Diameters range from 2 to 40 mm; 8, 10, 12, 16 and 18 mm are the most common sizes for cabinet making. You can choose between brazed carbide (HW), solid carbide (HWM) and versions with indexable inserts.
Choosing diameter and shank
Choose the cutter diameter to match the thickness of the panel that must fit into the groove: 4 mm for a thin back panel, 8 mm for a partition in thin board, 18 mm for 18 mm board. Do measure the board first: 18 mm board is often slightly thinner, and then you mill with a smaller cutter in two passes. Also check the shank: 6, 8, 10, 12 or 20 mm, or 1/4", 3/8" and 1/2" in inch. The versions with indexable inserts have an internal thread (M10 or M12x1) and are screwed onto a suitable shank.
Groove or rebate: the fence makes the difference
A groove lies in the face and is milled with a parallel fence or along a guide rail. A rebate lies on the edge and is milled with the fence against the side, or with a rebate cutter with a pilot bearing. Work in passes of three to five millimeters deep and, for deep grooves, first mill a shallow guide groove — then the second pass stays exactly in the track.
How do I get a groove that fits my board thickness exactly?
How deep may I mill per pass?
Is there a grooving cutter with a bearing?
Why is my groove wider than the cutter?
What does a plunge cut mean?
Related categories
- Spiral routers
- Moulder cutters with bore
- Diamond cutters
- Straight edge cutters
- Chamfer Bits
- Round-over bits
- Profile routers
- Profile and counterprofile cutters
- V-groove cutters
- Disk Cutters
- Disc cutter parts
- Dovetail Cutters
- Rabbet cutters
- Handle cutters
- Panel cutters
- Drawer cutters
- Joinery cutters
- T-slot cutters
- Surfacing cutters
- Ball-nose cutters
- Core box routers
- Half-Round Cutters
- Semi-round router bits
- Quarter round cutters
- 2D / 3D cutters
- Other Router Bits
- Router sets