Spiral routers
On CNC machines and routers running in daily production, spiral router bits are the standard. Thanks to their spiral cutting edge, they stay continuously in contact with the material. This ensures smooth running, efficient chip evacuation and a high cutting quality. With more than four hundred versions, you will find positive and negative HWM spiral router bits here, with or without coating, roughing cutters for heavy stock removal and specialised spiral router bits for machining expanded polystyrene.
The spiral direction determines on which side of the panel you obtain the best finish. A positive spiral router bit evacuates chips upwards and ensures a clean underside, ideal when the visible side is at the bottom. A negative spiral router bit evacuates chips downwards, presses the material down and delivers a splinter-free top side. That is the best choice when the visible side is on top.
Coated HWM spiral router bits are particularly suitable for abrasive sheet materials. Thanks to their longer service life, the extra cost is usually recouped quickly in intensive use.
Which material group are you looking for a solution for?
Filters
Availability
D (diameter) in mm
Connection type
Cutting material
Brand
I (effective cutting length) in mm
L (total length) in mm
R (radius) in mm
S (shank) in mm
Shank dimensions
Fixed or indexable knives
EU safety standard
Z (number of teeth / cutting edges)
Entry cut
Roughing cutter
S (shank) in inches
I1 (short cutting length)
Rotation direction
Material group
Material to be machined

Positive spiral cutter, HWM + coating D=16mm S=16mm L=100mm I=52mm · 193.162.41
- D=16 x 52mm L=100
- S=16 Z3
- HWM Chrome Coating DLCS

Positive spiral cutter, HWM + coating D=16mm S=16mm L=110mm I=62mm · 193.163.41
- D=16 x 62mm L=110
- S=16 Z3
- HWM Chrome Coating DLCS

Positive spiral cutter, HWM + coating D=16mm S=16mm L=120mm I=72mm · 193.164.41
- D=16 x 72mm L=120
- S=16 Z3
- HWM Chrome Coating DLCS

Positive spiral router cutter, HWM D=16mm S=16mm L=120mm I=72mm · 193.165.11
- D=16 mm x I=72 mm
- S=16 mm L=120 mm
- Z=3 HWM

Positive spiral router cutter, HWM D=18mm S=18mm L=110mm I=55mm
- D=18 mm x I=55 mm
- S=18 mm L=110 mm
- Z=3 HWM

Positive spiral router cutter, HWM D=20mm S=20mm L=120mm I=60mm · 193.200.11
- D=20 mm x I=60 mm
- S=20 mm L=120 mm
- Z=3 HWM

Positive spiral cutter, HWM + coating D=20mm S=20mm L=120mm I=60mm
- D=20 mm x I=60 mm
- S=20 mm L=120 mm
- Z=3 HWM

Positive spiral cutter, HWM + coating D=20mm S=20mm L=100mm I=52mm · 193.200.41
- D=20 x 52mm L=100
- S=20 Z3
- HWM Chrome Coating DLCS

Positive spiral router cutter, HWM D=20mm S=20mm L=120mm I=70mm
- D=20 mm x I=70 mm
- S=20 mm L=120 mm
- Z=3 HWM

Positive spiral cutter, HWM + coating D=20mm S=20mm L=120mm I=72mm · 193.201.41
- D=20 x 72mm L=120
- S=20 Z3
- HWM Chrome Coating DLCS

Positive spiral router cutter, HWM D=20mm S=20mm L=165mm I=102mm
- D=20 mm x I=102 mm
- S=20 mm L=165 mm
- Z=3 HWM

Positive spiral cutter, HWM + coating D=20mm S=20mm L=130mm I=85mm · 193.202.41
- D=20 x 85mm L=130
- S=20 Z3
- HWM Chrome Coating DLCS

Positive spiral cutter, HWM + coating D=20mm S=20mm L=150mm I=100mm · 193.203.41
- D=20 x 100mm L=150
- S=20 Z3
- HWM Chrome Coating DLCS

Positive spiral cutter, HWM + coating D=8mm S=10mm L=57,5mm I=32mm
- D=8 x 32mm L=57,5
- S=10 Z3
- HWM Chrome Coating DLCS

Negative spiral router bit, HWM D=8mm S=8mm
- D=8 x 32mm L=80mm
- S=8 Z3
- HWM Neg

Negative spiral router bit, HWM D=10mm S=10mm L=80mm I=32mm · 194.100.11
- D=10 x 32mm L=80
- S=10 Z3

Negative spiral router bit, HWM D=10mm S=10mm L=90mm I=42mm · 194.101.11
- D=10 x 42mm L=90
- S=10 Z3

Negative spiral router bit, HWM D=12mm S=12mm L=80mm I=35mm · 194.120.11
- D=12 x 35mm L=80
- S=12 Z3

Negative spiral router bit, HWM D=12mm S=12mm L=80mm I=35mm · 194.120.12
- D=12 mm x I=35 mm
- S=12 mm L=80 mm
- Z=3 HWM

Negative spiral router bit, HWM D=12mm S=12mm L=90mm I=42mm
- D=12 x 42mm L=90
- S=12 Z3

Negative spiral router bit, HWM D=14mm S=14mm L=110mm I=50mm · 194.140.11
- D=14 mm x I=50 mm
- S=14 mm L=110 mm
- Z=3 HWM

Negative spiral router bit, HWM D=14mm S=14mm L=110mm I=50mm · 194.140.12
- D=14 mm x I=50 mm
- S=14 mm L=110 mm
- Z=3 HWM

Negative spiral router bit, HWM D=16mm S=16mm L=110mm I=55mm · 194.160.11
- D=16 mm x I=55 mm
- S=16 mm L=110 mm
- Z=3 HWM

Negative spiral router bit, HWM D=16mm S=16mm L=110mm I=55mm · 194.160.12
- D=16 mm x I=55 mm
- S=16 mm L=110 mm
- Z=3 HWM
24 of 423 products shown
Helical routers: clean edges in sheet material
With a helical router, the cutting edge runs in a spiral around the axis. As a result, the cutter cuts continuously instead of chopping, with a noticeably smoother edge and less vibration. That makes the difference in melamine-faced sheet material, plywood and solid wood, but also in plastic, aluminium and polystyrene foam, for which separate versions exist. You can use helical routers both on the CNC and on the router.
Positive, negative or combined
A positive (upcut) spiral carries the chip upwards: the groove stays clean and the underside is crisp, but the top side can chip out and the workpiece is lifted slightly — so on the CNC, make sure it is clamped securely. A negative (downcut) spiral pushes the material down toward the table and keeps the top side splinter-free, but the chip stays in the groove. A compression cutter (positive and negative) cuts from the top and from the bottom toward the middle: both sides stay clean, the standard for double-sided melamine-faced board.
Cutting material, cutting edges and shank
Most helical routers are made of solid carbide (HWM), also with DLCS coating for abrasive sheet material; for aluminium and plastic there are separate versions, including in HSS-Co. One cutting edge removes chips best in soft and resinous wood and in plastic; more cutting edges give a finer finish at a higher feed rate. Roughing cutters remove material quickly and aggressively. The shank ranges from 3 to 32 mm, or 1/4", 3/8" and 1/2" in inch; always clamp deep enough.
When do I choose a negative spiral cutter?
What exactly does a compression cutter do?
One, two or more cutting edges?
Which helical cutter for aluminium, plastic or polystyrene foam?
Why does my helical cutter break?
Which helical cutter is best for milling plywood on a CNC machine?
Where can I buy helical cutters for a CNC router?
At Garnotec you will find helical cutters for CNC machines and routers, with a wide range of positive and negative HWM helical cutters, with or without coating, as well as variants for polystyrene foam and more aggressive material removal. Pay close attention to the spiral direction: a positive cutter gives a clean underside, a negative cutter a splinter-free top side. Garnotec is a wholesaler in Meerhout with more than 30 years of expertise and a webshop with more than 20,000 articles for wood and metal working.
Related categories
- Straight fluting cutters
- Moulder cutters with bore
- Diamond cutters
- Straight edge cutters
- Chamfer Bits
- Round-over bits
- Profile routers
- Profile and counterprofile cutters
- V-groove cutters
- Disk Cutters
- Disc cutter parts
- Dovetail Cutters
- Rabbet cutters
- Handle cutters
- Panel cutters
- Drawer cutters
- Joinery cutters
- T-slot cutters
- Surfacing cutters
- Ball-nose cutters
- Core box routers
- Half-Round Cutters
- Semi-round router bits
- Quarter round cutters
- 2D / 3D cutters
- Other Router Bits
- Router sets