Handle cutters
Milling a handle recess directly into the panel is a sleek solution for fronts without screw-on handles. This range of handle groove cutters in HW design is made for that, supplemented by matching profile cutters. The milled profile gives your fingers grip at the top or bottom of a drawer or door front. This lets you create handleless kitchen and cabinet fronts with a continuous, calm appearance. Milling is best done on the router table: guide the panel along the fence, which produces an even profile over the full length. First set the height on a test piece of the same material and check that your fingers hook comfortably behind the profile before milling the final fronts.
What type of shaft would you like to use?
Filters
Availability
Brand
I (effective cutting length) in mm
R (radius) in mm
S (shank) in mm
Shank dimensions
L (total length) in mm
Line
d (small diameter) in mm
D (diameter) in mm
Material to be machined

Handle Groove Cutter, HW D=47,6mm L=67mm I=28,5mm d=24mm · 855.601.11
- D=47,6 x 28.5mm
- R=6,35 L=67
- S=12,7 Z2

Handle Groove Cutter, HW D=19,05mm L=57mm I=19,05mm d=9,5mm · 855.602.11
- D=19,05 x 19,05mm
- R=4,76 L=57
- S=12,7 Z2

Handle Groove Cutter, HW D=38,1mm L=62mm I=20,7mm d=17mm
- D=38,1 x 20,7mm
- R=6 L=62
- S=12,7 Z2

Drawer front cutter, HW L=66,6mm
- D=47,6 x 30mm
- R=7,14 L=66,6
- S=12,7 Z2

Handle Groove Cutter, HW D=29mm L=60mm I=20mm d=11,1mm · 855.605.11
- D=29 x 20mm
- R=4,8 L=60
- S=12,7 Z2

Handle Groove Cutter, HW D=36mm L=60mm I=16mm d=16mm · 855.606.11
- D=36 x 16mm L=60
- S=12,7 Z2

Handle Groove Cutter, HW D=19,05mm L=57mm I=19,05mm d=9,5mm · 955.102.11
- D=19,05 x 19,05mm
- R=4,76 L=57
- S=8 Z2

Handle Groove Cutter, HW D=38,1mm L=55,5mm I=20,7mm d=17mm · 955.103.11
- D=38,1 x 20,7mm
- R=6 L=55,5
- S=8 Z2

Handle Groove Cutter, HW D=29mm L=60mm I=20mm d=11,1mm · 955.105.11
- D=29 x 20mm L=60
- S=8 Z2

Handle Groove Cutter, HW D=47,6mm L=67mm I=28,5mm d=24mm · 955.601.11
- D=47,6 x 28,5mm
- R=6,35 L=67
- S=12 Z2

Drawer front cutter, HW L=68mm
- D=47,6 x 30mm
- R=7,14 L=68
- S=12 Z2

Handle Groove Cutter, HW D=29mm L=60mm I=20mm
- D=29 x 19mm
- R=4,8 L=60
- S=12 Z2

Handle Groove Cutter, HW D=36mm L=60mm I=16mm d=16mm · 955.606.11
- D=36 x 16mm L=60
- S=12 Z2

Profile cutter, HW D=47,6mm S=12mm L=63,5mm I=25,4mm
- D=47,6 x 25.4mm
- S=12 Z2

Handle router, HW D=19,05mm L=57,2mm I=19,05mm R=4,8mm
- D=19,05 x 19,05mm
- R=4,8 L=57,2
- S=8 Z2

Handle router, HW D=38,1mm L=55,4mm I=20,7mm R=6mm
- D=38,1 x 20,7mm
- R=6 L=55,4
- S=8 Z2
Related categories
- Straight fluting cutters
- Spiral routers
- Moulder cutters with bore
- Diamond cutters
- Straight edge cutters
- Chamfer Bits
- Round-over bits
- Profile routers
- Profile and counterprofile cutters
- V-groove cutters
- Disk Cutters
- Disc cutter parts
- Dovetail Cutters
- Rabbet cutters
- Panel cutters
- Drawer cutters
- Joinery cutters
- T-slot cutters
- Surfacing cutters
- Ball-nose cutters
- Core box routers
- Half-Round Cutters
- Semi-round router bits
- Quarter round cutters
- 2D / 3D cutters
- Other Router Bits
- Router sets