Disc cutter parts
A disc cutter on a spindle is a built-up system: the cutter itself, the spindle and the matching bearings and clamping parts together determine the groove width and depth. In this category disc cutter parts you will find spindles with and without ball bearing, HW disc cutters in loose version and disc cutters with conical seating, so you can expand an existing setup or replace a worn part in a targeted way. When in doubt, replace the spindle rather than keep working too long: play in the bearings translates directly into a wider, ragged groove. If you want to make multiple groove widths with the same spindle, combine different disc cutters and keep an eye on the clamping length — the nut must always bear fully.
Filters
Availability
B (bore) in mm
D (diameter) special
R (radius) in mm
S (shank) in mm
Z (number of teeth / cutting edges)
I (effective cutting length) in mm
L (total length) in mm
S (shank) in inches
D (diameter) in mm
Material to be machined

Spindle with ball bearing S=8mm L=61mm LB=26mm
- D=M8 x 26mm
- L=61 S=8

Spindle without ball bearing (with locking ring) S=8mm
- L=55 S=8

Spindle with ball bearing (with locking ring) S=8mm L=55mm
- 9mm
- L=61 S=8

Spindle without ball bearing S=8mm L=61mm LB=11mm
- D=8 x 11mm
- L=61 S=8

Spindle with ball bearing S=8mm L=61mm LB=11mm
- D=8 x 11mm
- L=61 S=8

Spindle without ball bearing long series S=8mm L=86mm
- D=M8 x40mm
- L=86 S=8

Spindle with ball bearing S=8mm L=86mm LB=40mm
- D=M8 x40mm
- L=86 S=8

Spindle without ball bearing S=12mm L=67,5mm LB=26mm
- D=M8 x 26mm
- L=67,5 S=12

Spindle with ball bearing S=12mm L=67,5mm LB=26mm
- D=M8 x 26mm
- L=67,5 S=12

Spindle without ball bearing long series S=12mm L=81mm
- D=M8 x 40mm
- L=81 S=12

Spindle for glueing cutter S=12mm L=97mm · 924.129.00
- D=M12 x 54mm
- L=97 S=12

Spindle for rectangular jointing cutter S=12mm L=97mm · 924.130.00
- D=M8 x 47mm
- L=97 S=12

Spindle for tongue and groove cutter set S=12mm L=71mm
- D=M8 x 29,75mm
- L=71 S=12

Spindle without ball bearing S=12mm L=71mm LB=35,5mm
- D=M8 x 35,5mm
- L=71 S=12

Spindle without ball bearing S=12mm L=71mm LB=23mm
- D=M8 x 23mm
- L=71 S=12

Spindle without ball bearing S=12mm L=85mm LB=29,5mm
- D=M12 x 39.5mm
- L=85 S=12

spindle without setting rings or lock nut S=12mm L=100mm
- D=M12 x 54,5mm
- L=100 S=12

Spindle for 3-piece groove and tongue cutter set S=12mm L=85mm
- D=M12

Spindle without ball bearing S=12mm L=100mm LB=57mm
- D=M8 x 57mm
- L=100 S=12
19 of 91 products shown
Related categories
- Straight fluting cutters
- Spiral routers
- Moulder cutters with bore
- Diamond cutters
- Straight edge cutters
- Chamfer Bits
- Round-over bits
- Profile routers
- Profile and counterprofile cutters
- V-groove cutters
- Disk Cutters
- Dovetail Cutters
- Rabbet cutters
- Handle cutters
- Panel cutters
- Drawer cutters
- Joinery cutters
- T-slot cutters
- Surfacing cutters
- Ball-nose cutters
- Core box routers
- Half-Round Cutters
- Semi-round router bits
- Quarter round cutters
- 2D / 3D cutters
- Other Router Bits
- Router sets