
Cross-lap joint cutter set, HW D=35mm S=12mm · 955.801.11 · CMT Orange Tools®
Product specifications
| Property | Value |
|---|---|
| Category | Profile and counterprofile cutters |
| Ball bearing options | Standard on head |
| Brand | CMT Orange Tools® |
| Connection type | Cylindrical shank |
| Cutting material | Carbide (brazed) |
| D (diameter) in mm | 35 |
A professional set for profiling windows and making window joints. For window thicknesses up to no less than 35mm.
In our example of making a window step by step, the following tools and materials are used:
- the CMT window profiling set (article 955.801.11)
- 2 stiles 35mm. thick
- 2 rails 35mm. thick
- test wood.
The CMT window profiling set is designed for making 35mm thick windows, but this set can also be used for windows from (minimum) 28mm thick. Window timber thicker than 35mm is not possible due to the cutter height of this set. Determine and calculate your cutting depths based on the thickness and width of the wood you choose. We recommend first making a test cut in a piece of scrap wood.
Step 1 - Dimensions and making the tenons. The ideal thickness of the rails and stiles is 35mm. At the end grain of the rails, make the tenons across the full width, and along the full length of the rails and stiles, make the profiles. If you shorten the lengths for the rails and stiles, you must take into account that you keep the rails twice the length of the tenon longer. The length of the tenon must be at least half the width of the stile. Rout or saw a 16mm wide rebate at the end of the wood using a circular saw, radial arm saw or a router according to the first image. This 16mm is a fixed size and is determined by the height of the router. The tenon thickness is 6mm. Turn the workpiece over and rout out the rebate on the other side of the tenon. In our example this rebate is 13mm. wide, but if you use a thinner piece of window timber this dimension is smaller.
Step 2 - Making the counter profile on the rails and the muntins. To make the counter profile, place the workpiece with the top view on the table as indicated in the twe