Cutting tools: choice of 20,000 articles
Select language
Garnotec — Specialist in hole saws

Hole saws for every application

Professional hole saws, available directly from stock. For wood, metal, plastic and more.

Four systems, one difference: how the hole saw fits onto the holder, and thus how quickly you change size.

  • Direct from stockAll common sizes available immediately.
  • Top qualityProfessional hole saws from CMT and GRN Tools.
  • Large assortmentDiameters from Ø 16 mm to Ø 270 mm.

Four systems, one difference

Choose a system and see the operation step by step.

gatzaag s lock systeem v5
  1. Turn.The knurled sleeve on the holder unscrews.
  2. Slide.The hole saw slides straight onto the holder.
  3. Click.The sleeve springs back and locks the hole saw.
  • Fast change with one holder
  • An adapter on every hole saw
S-Lock parts

The four systems side by side

Quick changeYesYesYesNo
One holder for all sizesYes550-PHG1Yes
1 holder, for your machine:
  • 550-PH85 for HEX 8,5
  • 550-PH11 for HEX 11
  • 550-PHSD for SDS
No
2 holders:
  • 550.HS1 for < 32 mm
  • 550.HS2 for ≥ 32 mm
No
2 holders:
  • 550-PHG6 for < 32 mm
  • 550-PHG8 for ≥ 32 mm
ChangeTurn sleeve, without toolsPush button, without toolsClick onto the hexagon, without toolsScrew and tighten
AdapterOn every hole saw: 550-PAG01 or 550-PAG02Already mounted on 550X and 551XNone: fixed hubNone
Hole saws550G and 551G550X and 551X550 and 551550G and 551G
Enlarge hole550-PAG05550-PA05550.DB1550-PAG16
SDS machine550-SDSG550-PHSD550.SDS1 or 550.SDS2550-SDSG

Not sure? Look at the back

Same diameter, different back. The back of your hole saw determines which system it fits.

Back of a hole saw with a single threaded hole

Single thread

550G and 551G from GRN Tools

  • Traditional holderfits
  • S-Lock550-PAG01 or 550-PAG02With adapter
  • Xtreme Fast550-PA01, 550-PA02 or 550-PA03With adapter
  • FastX4Does not fit
Back of a hole saw with a mounted black adapter

Adapter mounted

550X and 551X from CMT

  • Xtreme Fastfits
  • S-Lock550-PAG01 or 550-PAG02Change adapter
  • Traditional holderAdapter off
  • FastX4Does not fit
Back of a hole saw with a fixed metal hub with hexagonal hole

Fixed hex hub

550 and 551 from CMT

  • FastX4fits
  • S-LockDoes not fit
  • Xtreme FastDoes not fit
  • Traditional holderDoes not fit
Full fit table per series
Your hole sawTraditionele houderS-LockXtreme FastFastX4
550G carbideØ 19–225, 45 sizesfitsWith adapter550-PAG01 or 550-PAG02With adapter550-PA01, 550-PA02 or 550-PA03Does not fit
551G bi-metalØ 16–168, 40 sizesfitsWith adapter550-PAG01 or 550-PAG02With adapter550-PA01, 550-PA02 or 550-PA03Does not fit
550X carbideØ 19–168, 42 sizesAdapter offChange adapter550-PAG01 or 550-PAG02fitsDoes not fit
551X bi-metalØ 16–168, 40 sizesAdapter offChange adapter550-PAG01 or 550-PAG02fitsDoes not fit
550 carbideØ 19–225, 45 sizesDoes not fitDoes not fitDoes not fitfits
551 bi-metalØ 16–168, 40 sizesDoes not fitDoes not fitDoes not fitfits

Hole saw from another brand? It fits if the thread in the back is the same: 1/2"-20 below Ø 32 and 5/8"-18 from Ø 32.

This is how it fits together

Hole saw, adapter, holder and pilot drill: a different combination for each system.

Options:
Ø 68Holder550-PHG1Adapter550-PAG02Hole saw550-068GCenter drill550-PDG06turn, slide, clickscrews into the backThe drill is in the holderTurn. Slide. Click.
S-Lock
Hole saw550-068G

Series 550G (carbide) or 551G (bi-metal), with thread in the back.

Adapter550-PAG02

550-PAG01 below Ø 32, 550-PAG02 from Ø 32. Packed in threes; stays on the hole saw.

Holder550-PHG1

One holder for all sizes.

Center drill550-PDG06

HSS 550-PDG06 or carbide 550-PDG07, replaceable separately.

The items per system

CMT Orange Tools

FastX4

Click onto the hex.

GRN Tools

Traditional holder

Screw. Two pins. Fixed.

Carbide or bi-metal?

You choose the system once. The type of hole saw is chosen according to the material.

For precise drilling in various materials

Carbide hole saws (industrial-grade HW)

5×up to 5× faster than bi-metal
10×up to 10× longer service life

Our carbide hole saws (HW) are ideal for professionals and demanding DIYers who want to drill quickly, accurately and durably. Thanks to the larger chip spaces, they drill up to 5× faster than bi-metal hole saws and clog much less quickly. This prevents burning the wood and extends service life up to 10× longer than bi-metal.

Tip for a perfect finish: first turn counterclockwise through the top layer, then clockwise for a smooth result.

Ideal for drilling in:

  • Hardwood and softwood
  • Aerated concrete
  • Plastic
  • Drywall
  • Soft stone

Specially for non-ferrous materials, not suitable for wood

Bi-metal hole saws (BIM 8% cobalt)

8%cobalt

Our bi-metal hole saws (BIM) are 8% CO and designed for non-ferrous materials. Note: the correct speed is crucial for a long service life. For each diameter, you will find the recommended speed on the product detail page.

A common mistake is to use these saws in wood: they clog quickly and burn, significantly reducing service life.

Ideal for drilling in:

  • Aluminium
  • Cast iron
  • Metal
  • Stainless steel (RVS)
  • Zinc
Long hole saw drills a through-hole in a wooden beam

Available directly from stock

Professional hole saws for the demanding professional

Frequently asked questions

About hole saw systems, adapters and holders.

What is the difference between S-Lock, Xtreme Fast and FastX4?

All three are quick-change systems. With S-Lock, each hole saw gets an adapter and clicks onto one holder with a twist of the sleeve. With Xtreme Fast, the adapter is already on the hole saw and the holder clicks onto it with a push button. With FastX4, the hole saw has a fixed hub and clicks onto the hex of the exchange holder.

Does a 550G series hole saw fit on an Xtreme Fast holder?

Yes, with an adapter: 550-PA01 for Ø 16 to 30 mm, 550-PA02 for Ø 32 to 150 mm and 550-PA03 from Ø 152 mm. You can find all adapters and holders among the accessories for hole saws.

Why is there a limit at Ø 32 mm?

Below and above Ø 32 mm, the back of the hole saw has a different thread. With S-Lock and Xtreme Fast, you use a different adapter and keep the same holder. With FastX4 and the traditional holder, you use a different holder.

Can I enlarge an existing hole?

Yes, with two hole saws in a row: the small one guides in the existing hole, the large one cuts. You use 550-PAG05 with S-Lock, 550-PA05 with Xtreme Fast, 550.DB1 with FastX4 and 550-PAG16 on the traditional holder 550-PHG8.

May I use a bi-metal hole saw in wood?

No. Bi-metal hole saws clog quickly in wood and burn. For wood, plastic and sheet material, choose a carbide hole saw.

Can I use hole saws on an SDS machine?

Yes. With Xtreme Fast, use holder 550-PHSD. With S-Lock and the traditional holder, use adapter piece 550-SDSG; with FastX4, 550.SDS1 or 550.SDS2.

Need professional advice?

We are happy to help you choose the right hole saw for your application.

Garnotec — your specialist in hole saws, available directly from stock

We use cookies to ensure the website functions properly. In addition, we place analytical cookies (Google Analytics, Microsoft Clarity) to analyse the use of the website. These are only placed after your consent. More information