Reciprocating saw blades
During demolition, renovation and installation work, a saw blade has to take the strain: nails, residual material and changing densities. The reciprocating saw blades in this category are therefore made of bi-metal, combining a tough back with hard teeth. You will find lengths from 150 to 300 mm and toothings from 6 to 14 TPI, including blades with variable toothing such as 10-14 TPI. Rule of thumb when choosing: coarse toothing with low TPI for fast work in wood and nailed wood, finer toothing for metal and pipes, and variable TPI when you encounter mixed material. Choose a blade length that is sufficiently long so that the teeth come free of the material on both sides — this prevents jamming and extends service life.
Which material are you looking for a solution for?
Filters
K (thickness)
D (diameter) special
Cutting material
Machining type
I (effective cutting length) in mm
L (total length) in mm
B (tooth shape)
Material group
Material to be machined
Packaging unit

Reciprocating saw blade HM 150mm x 19 X 1,25 x 6TPI
- L=150mm I=130mm
- H=19mm K=1,25mm
- HW, 2 pieces

Reciprocating saw blade HCS 150mm x 1,25 x 6TPI
- L=150mm I=130mm
- H=19mm K=1,25mm
- HCS, 5 pieces

Reciprocating saw blade bi-metal 150mm x 1,25 x 6 TPI · JS711DF-5
- L=150mm I=130mm
- H=12mm K=1,25mm
- Bim 8% Co, 5 pieces

Reciprocating Saw Blade Bi-metal 200mm x 1,27 x 8-12TPI · JS725VFR-20
- L=200mm I=180mm
- H=19mm K=1,27mm
- BiM 8% Co, 20 pieces

Reciprocating Saw Blade Bi-metal 200mm x 1,27 x 8-12TPI · JS725VFR-5
- L=200mm I=180mm
- H=19mm K=1,27mm
- Bim 8% Co, 5 pieces

Reciprocating Saw Blade Bi-metal 150mm x 1,6 x 9TPI
- L=150mm I=130mm
- H=22mm K=1,6mm
- Bim 8% Co, 5 pieces

Bi-metal reciprocating saw blade 150mm x 0,9 x 24TPI
- L=150mm I=130mm
- H=19mm K=0,9mm
- Bim 8% Co, 5 pcs

Bi-metal reciprocating saw blade 150mm x 0,9 x 14TPI · JS922BF-20
- L=150mm I=130mm
- H=19mm K=0,9mm
- Bim 8% Co, 20 pieces

Bi-metal reciprocating saw blade 150mm x 0,9 x 14TPI · JS922BF-5
- L=150mm I=130mm
- H=19mm K=0,9mm
- Bim 8% Co, 5 pieces

Bi-metal reciprocating saw blade 150mm x 0,9 x 18TPI · JS922EF-20
- L=150mm I=130mm
- H=19mm K=0,9mm
- Bim 8% Co, 20 pcs

Bi-metal reciprocating saw blade 150mm x 0,9 x 18TPI · JS922EF-5
- L=150mm I=130mm
- H=19mm K=0,9mm
- Bim 8% Co, 5 pieces

Reciprocating saw blade Bi-metal 150mm x 0,9 x 10TPI
- L=150mm I=130mm
- H=19mm K=0,9mm
- Bim 8% Co, 5 pieces

Reciprocating saw blade bi-metal 150mm x 0,9 x 10-14TPI
- L=150mm I=130mm
- H=19mm K=0,9mm
- Bim 8% Co, 5 pieces

Reciprocating saw blade Bi-metal 150mm x 1,25 x 10-14TPI
- L=150mm I=130mm
- H=19mm K=1,25mm
- Bim 8% Co, 5 pieces

Reciprocating saw blade HM 150mm x 24 x 1,2 x 8TPI
- L=150mm I=130mm
- H=24mm K=1,2mm
- HW 3 pieces

Reciprocating saw blade HM 150mm x 24 x 1,2 x 6-8TPI
- L=150mm I=130mm
- H=24mm K=1,2mm
- HW 3 pieces
16 of 64 products shown
Reciprocating saw blades for demolition, wood and metal
A reciprocating saw — also called a sabre saw — is the machine for rough and fast work: cutting through beams, removing door frames, shortening pipes, pruning. The blade absorbs the heaviest load and must therefore match both the material and the way you saw. Here you will find CMT reciprocating saw blades with universal shank, from 150 to 455 mm long, in bi-metal with 8% cobalt, HCS and carbide — for wood with nails, sheet steel, profiles, aerated concrete, cement board and more.
Choose a reciprocating saw blade by material
For wood without metal, choose a coarse tooth pitch with plenty of chip space, for example an HCS blade with 3 to 6 teeth per inch. For wood with nails or screws and for pallets, choose a bi-metal blade that tolerates metal without losing teeth. For sheet steel, pipes and profiles, choose a fine tooth pitch of 14 to 24 TPI, with at least three teeth in the wall thickness. For aerated concrete, cement board and soft stone there are special blades, including carbide; a standard tooth blade will become blunt in no time at all.
Length and cutting technique
Choose a blade that, at full stroke, extends at least a few centimeters beyond the other side of the workpiece: a blade that is too short cuts with only part of its teeth and breaks. Press the saw shoe firmly against the workpiece so the machine does not start bouncing, and let the blade cool down during long cuts in metal. Bent blades are disposable items: they will never cut straight again.
Which reciprocating saw blade do I use for wood with nails?
Why is my reciprocating saw bouncing?
Can I cut metal with a reciprocating saw?
Which blade length do I need?
Does every saw blade fit my reciprocating saw?
Need help choosing?
In our guide, you can read about the differences and which choice suits your work.