Cutting tools: choice of 20,000 articles
Select language

Multitool sanding paper

With a sanding pad on the multitool, you can sand deep into corners where an orbital sander cannot reach. This category contains multitool sanding paper with velcro fastening in grits 40, 60, 80, 100, 120, 180 and 240, supplemented by a polished sanding pad with velcro system as carrier. The velcro system lets you change grit in seconds: start coarse with grit 40 or 60 to remove old paint or uneven spots, and work through 80 to 120 for a smooth surface ready for finishing. Do not skip grit steps; each step removes the scratches from the previous one. Replace the paper as soon as the grit becomes glossy or clogged, because sanding on with worn paper costs time and burns the surface.

Read more about this category
Find what you need faster
Step 1 of 3
Polished sanding pad with Velcro system
Multi-material

Polished sanding pad with Velcro system

  • W=93mm
  • Multi-Mat ,Velcro®
  • Glass, Hard Soft wood, Thin sheet
€24.00
€29.04 VAT incl.
Code:OMA30000-X4
In stock
Sandpaper with velcro system grit 40
Wood-related applications

Sandpaper with velcro system grit 40

  • W=93mm
  • Wood ,Velcro®
  • Construction timber, Plywood, Hard Softwood
€4.80
€5.81 VAT incl.
Code:OMA30040-X10
In stock
Hook-and-loop sanding paper grit 60
Wood-related applications

Hook-and-loop sanding paper grit 60

  • W=93mm
  • Wood ,Velcro®
  • Construction timber, Plywood, Hard Softwood
€4.80
€5.81 VAT incl.
Code:OMA30060-X10
In stock
Sandpaper with velcro system grit 80
Wood-related applications

Sandpaper with velcro system grit 80

  • W=93mm
  • Wood ,Velcro®
  • Construction timber, Plywood, Hard softwood
€4.80
€5.81 VAT incl.
Code:OMA30080-X10
In stock
Velcro sanding paper grit 100
Wood-related applications

Velcro sanding paper grit 100

  • W=93mm
  • Wood ,Velcro®
  • Construction wood, Plywood, Hard softwood
€4.80
€5.81 VAT incl.
Code:OMA30100-X10
In stock
Sandpaper with Velcro system grit 120
Wood-related applications

Sandpaper with Velcro system grit 120

  • W=93mm
  • Wood ,Velcro®
  • Construction wood, Plywood, Hard softwood
€4.80
€5.81 VAT incl.
Code:OMA30120-X10
In stock
Sandpaper with Velcro system grit 180
Wood-related applications

Sandpaper with Velcro system grit 180

  • W=93mm
  • Wood ,Velcro®
  • Construction timber, plywood, hard softwood
€4.80
€5.81 VAT incl.
Code:OMA30180-X10
In stock
Sandpaper with velcro system grit 240
Wood-related applications

Sandpaper with velcro system grit 240

  • W=93mm
  • Wood,Velcro®
  • Construction timber, Plywood, Hard softwood
€4.80
€5.81 VAT incl.
Code:OMA30240-X10
In stock
93mm perforated sanding pad, Starlock
Multi-material

93mm perforated sanding pad, Starlock

  • W=93mm
  • Multi-Mat, Starlock
  • 1 piece
€11.20
€13.55 VAT incl.
Code:OMF136-X1
In stock
About this category

Sandpaper for the multi-tool

With a triangular sanding pad, an oscillating multi-tool becomes a detail sander that reaches into corners no round sander can get to. This sandpaper for the multi-tool measures 93 mm and is attached with hook and loop (Velcro), in grits 40, 60, 80, 100, 120, 180 and 240, per 10 pieces. Matching this, you will find a perforated 93 mm sanding pad with Starlock connection and a polished sanding plate with Velcro.

Grit progression and working method

Always work in stages: start with the coarsest grit you need and then move up by roughly doubling each step — for example 80, 120, 180, 240. Do not skip a step, because each grit removes the scratches from the previous one. Work with light pressure: with an oscillating motion, the grit determines the sanding result, not how hard you press. Pushing harder only makes the paper heat up faster.

Points and edges wear out the fastest

With a triangular sanding pad, the point does most of the work and therefore wears out first. So turn the paper one third of a turn further instead of throwing it away: with three positions, you use each sheet three times. Replace the paper as soon as it turns glossy or becomes clogged; a clogged sheet no longer sands but polishes and leaves shiny spots in the finish.

Which grit sequence should I use?
Start with the coarsest grit the job calls for and double each step: for example 80, 120, 180, 240. Do not skip a step — each grit removes the scratches from the previous one, and a missed step will remain visible in the finish.
How do I get more out of one sanding sheet?
Turn the sheet one third of a turn further when the point is worn; with three positions, you use each sheet three times. Replace it as soon as it turns glossy or becomes clogged.
Why does my sanding leave shiny spots?
Because the paper is clogged and is polishing instead of sanding, or because you are pressing too hard. Replace the sheet and work with light pressure in even passes.
Do these sanding sheets fit every sanding pad?
They fit a 93 mm triangular sanding pad with hook and loop, such as the Starlock sanding pad in this category. For a different pad, check the shape and size; measure the pad or compare it with a sheet you currently use.
Compiled by Garnotec’s specialist team — specialist in professional cutting tools for more than 30 years. Unsure which version suits your machine or material? Contact our team · View the full range

We use cookies to ensure the website functions properly. In addition, we place analytical cookies (Google Analytics, Microsoft Clarity) to analyse the use of the website. These are only placed after your consent. More information